Chris, Can you send me the content of your modprobe.conf please?
About the SSH problem, can you tell me if /home is mounted on the clients? Also note that the problem related to the package selection has been fixed but i still need to generate new binary packages. Thanks a lot for your report! Regards, ----- "Christopher Pawela" <cpaw...@mcw.edu> a écrit : > Hello, > > I was able to fix the problem by adding a modprobe.conf to the image > and running the sequence Martin suggested. I left out the lines > containing the amd74xx module. For some reason the kernels involved in > installing oscar recognize the amd74xx module even though it is > compiled directly in the new kernels. Anyway I am able to rsync the > slave nodes now. I do however, face a new problem. > > The ssh system is broken. The automatic ssh logon between nodes is > nonfunctional. I am not sure if this is an issue with the current > release of oscar. > > Also, as reported before the Select Packages to Install is > nonfunctional. > > Thank you for the help in solving this problem, > > Chris Pawela > > > -----Original Message----- > From: geoffroy.val...@free.fr [mailto:geoffroy.val...@free.fr] > Sent: Friday, July 17, 2009 3:14 PM > To: Pawela, Christopher > Cc: oscar-devel > Subject: Re: [Oscar-devel] Testing Latest Release > > Pawela, > > Can you send me the logs related to the installation of selected > packages? I do not think i received a full log to try to fix the > problem (or i missed it). > > Also, can you try to add the "alias scsi_hostadapter1 amd74xx " line > to the /etc/modprobe.conf of your image (what Martin suggested). > > Regards, > > ----- "Christopher Pawela" <cpaw...@mcw.edu> a écrit : > > > I did copy a modprobe.conf file to the /etc image directory on the > > head node. Here it is. > > > > alias scsi_hostadapter sata_nv > > alias scsi_hostadapter1 usb-storage > > alias peth0 tg3 > > alias eth0 tg3 > > > > The modprobe.conf for the head node is > > > > alias scsi_hostadapter sata_nv > > alias scsi_hostadapter1 usb-storage > > alias peth0 tg3 > > alias eth0 tg3 > > alias eth1 tg3 > > > > The only difference is that I disabled the second ethernet card on > the > > slave nodes. I am completely stumped. I was able to get the > mkinitrd > > to run in the post_install script suggested on this forum by Thilo > by > > adding --omit-scsi-drivers. The problem is that the slave nodes > can't > > seem to find the hard disk directory upon bootup. This is very > strange > > because upon bootup the drivers and modules seem to load with no > > issues. > > > > Any further suggestions would be helpful. > > > > I also ran into the issue described by Mark were the Select > Packages > > to Install Failed on the oscar_wizard. > > > > Thank you for your prompt response, > > > > Christopher Pawela > > > > Is there anyway to snapshot a bootlog from a nonfunctioning slave > node > > so that I can properly post it on this forum? > > > > > > -----Original Message----- > > From: geoffroy.val...@free.fr [mailto:geoffroy.val...@free.fr] > > Sent: Fri 7/17/2009 2:42 PM > > To: oscar-de...@lists.sourceforge.net > > Cc: bern...@vanhpc.org; Pawela, Christopher > > Subject: Re: [Oscar-devel] Testing Latest Release > > > > Bernard, > > > > This is supposed to be done automatically if you are using the > > "unstable" repo but you have a good point: Pawela can you give us > the > > content of /etc/modprobe.conf for both the headnode and the image? > > > > On my side, i will double-check i did not forgot to create one of > the > > new RPMs. > > > > Regards, > > > > ----- "Bernard Li" <bern...@vanhpc.org> a écrit : > > > > > Hi Christopher: > > > > > > On Fri, Jul 17, 2009 at 11:24 AM, Pawela, > > Christopher<cpaw...@mcw.edu> > > > wrote: > > > > > > > I tested the latest OSCAR release from last night. I ran into > the > > > same problem as before. For some reason the amd74xx module is not > > > available during the mkinitrd process. I tried the fix from Thilo > > as > > > well with the same failure. The slave nodes still kernel panic > > upon > > > reboot after installation. > > > > > > > > Mounting root filesystem. > > > > mount: could not find filesystem '/dev/root > > > > Setting up other filesystems. > > > > Setting up new root fs > > > > setuproot: moving /dev failed: No such file or directory > > > > no fstab.sys, mounting internal defaults > > > > setuproot: error mount /proc: No such file or directory > > > > setuproot: error mount /sys: No such file or directory > > > > Switching to new root and running init. > > > > unmounting old /dev > > > > unmounting old /proc > > > > unmounting old /sys > > > > switchroot: mount failed: No such file or directory > > > > > > > > I really really don't want to have to install redhat el5 on one > > of > > > the slave nodes and then move the files over to the boot > directory. > > > The head node and the server node use the same hardware. I don't > > > understand why this is happening? The cluster is in a blade > server > > > like case and I don't have good access to the slave nodes to > > install > > > redhat. I am still searching for a work around with amd74xx. I > > assume > > > the problem is with the kernel. Apparently this module is now > > > incorporated in the kernel and was not before??? Is there a > > workaround > > > in the systemimager code? > > > > > > I think the issue is with /etc/modprobe.conf. Have you tried to > > copy > > > a known working modprobe.conf to your image/imaged node and boot > it > > > up? > > > > > > Cheers, > > > > > > Bernard > > > > > > > > > ------------------------------------------------------------------------------ > > > Enter the BlackBerry Developer Challenge > > > This is your chance to win up to $100,000 in prizes! For a > limited > > > time, > > > vendors submitting new applications to BlackBerry App World(TM) > > will > > > have > > > the opportunity to enter the BlackBerry Developer Challenge. See > > full > > > prize > > > details at: http://p.sf.net/sfu/Challenge > > > _______________________________________________ > > > Oscar-devel mailing list > > > oscar-de...@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/oscar-devel ------------------------------------------------------------------------------ _______________________________________________ Oscar-users mailing list Oscar-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/oscar-users
