Dear Geoffroy, Could you tell how I can revert back to 6.1.0 from unstable without full OS reinstall.
Regards, Nikita -----Original Message----- From: geoffroy.val...@free.fr [mailto:geoffroy.val...@free.fr] Sent: Monday, February 14, 2011 5:01 PM To: Nikita Andreev Cc: oscar-users@lists.sourceforge.net Subject: Re: [Oscar-users] Problem with GUI on CentOS 5.5 Nikita, Once again: - LAM has an issue, i did not look at it yet. - Torque/MAUI has issues, i pushed new RPMs into unstable; i do not know if you are using unstable, if so, it will be nice to send me the output otherwise i cannot progress (if you are not using unstable, no solution at the moment with Torque/MAUI). At the moment, i do not even know which version of the RPMs for Torque/MAUI we are trying to install so i cannot do more. Regards, ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > I've resolved an issue with yum update. But it doesn't solve any other > issues I'm still having. Switcher configuration doesn't work. It > doesn't see any of MPI implementations event when I check all three of > them. Step 3 bails out with LAM dependency problem. Then if I unselect > LAM it bails out with TORQUE dependency problem. Then if I unselect > TORQUE it bails out with MAUI dependency problem since MAUI depends on > TORQUE. If I unselect MAUI then I have successful install. I think I > will go for it and install all other packages manually. > > Thank you for support so far. > > Regards, > Nikita > > -----Original Message----- > From: geoffroy.val...@free.fr [mailto:geoffroy.val...@free.fr] > Sent: Sunday, February 13, 2011 11:18 AM > To: Nikita Andreev > Cc: oscar-users@lists.sourceforge.net > Subject: Re: [Oscar-users] Problem with GUI on CentOS 5.5 > > Nikita, > > It will be very useful if you give me the command you execute at the > same time, typically from the bash prompt to the end of the output. > > With the command, it seems to me that you try to remove/install only a > single RPM. Can you please try to remove all the torque RPMs with a > single command, something like "rpm -e torque-oscar > torque-oscar-server torque-oscar-scheduler". > > Regards, > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > Output follows: > > > > --> Finished Dependency Resolution > > torque-server-2.1.8-3oscar.x86_64 from oscar has depsolving > problems > > --> Missing Dependency: torque = 2.1.8-3oscar is needed by > package > > torque-server-2.1.8-3oscar.x86_64 (oscar) > > torque-server-2.1.8-3oscar.x86_64 from oscar has depsolving > problems > > --> Missing Dependency: libtorque.so.0()(64bit) is needed by > package > > torque-server-2.1.8-3oscar.x86_64 (oscar) > > Error: Missing Dependency: torque = 2.1.8-3oscar is needed by > package > > torque-server-2.1.8-3oscar.x86_64 (oscar) > > Error: Missing Dependency: libtorque.so.0()(64bit) is needed by > > package torque-server-2.1.8-3oscar.x86_64 (oscar) > > You could try using --skip-broken to work around the problem > > You could try running: package-cleanup --problems > > package-cleanup --dupes > > rpm -Va --nofiles --nodigest > > The program package-cleanup is found in the yum-utils package. > > > > Regards, > > Nikita > > > > -----Original Message----- > > From: geoffroy.val...@free.fr [mailto:geoffroy.val...@free.fr] > > Sent: Saturday, February 12, 2011 9:48 PM > > To: Nikita Andreev > > Cc: oscar-users@lists.sourceforge.net > > Subject: Re: [Oscar-users] Problem with GUI on CentOS 5.5 > > > > Nikita, > > > > What is the output when you run that command? > > > > Thanks, > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > Geoffroy, > > > > > > I've tried that. I've removed all torque-related packages. Same > > error > > > pops up. > > > > > > Regards, > > > > > > -----Original Message----- > > > From: geoffroy.val...@free.fr [mailto:geoffroy.val...@free.fr] > > > Sent: Saturday, February 12, 2011 11:19 AM > > > To: Nikita Andreev > > > Cc: oscar-users@lists.sourceforge.net > > > Subject: Re: [Oscar-users] Problem with GUI on CentOS 5.5 > > > > > > Nikita, > > > > > > Try to manually remove the RPMs: > > > yum remove torque-oscar torque-oscar-server > torque-oscar-scheduler > > > > > > Then, you should be good. > > > > > > Regards, > > > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > > > Dear Geoffroy, > > > > > > > > While trying to update to new package versions from repository > I > > > get > > > > dependency resolution problem. I tried to manually remove all > > > torque > > > > related packages and update again but with no luck. Find logs > > > > attached. > > > > > > > > Sincerely, > > > > Nikita > > > > > > > > -----Original Message----- > > > > From: geoffroy.val...@free.fr [mailto:geoffroy.val...@free.fr] > > > > Sent: Saturday, February 12, 2011 1:22 AM > > > > To: Nikita Andreev > > > > Cc: oscar-users@lists.sourceforge.net > > > > Subject: Re: [Oscar-users] Problem with GUI on CentOS 5.5 > > > > > > > > Nikita, > > > > > > > > Then unselect Torque and give it a try. > > > > > > > > About your question OS/ version of OSCAR, there is no clear > > answer: > > > it > > > > all depends which OSCAR packages you select (as i said before). > > If > > > you > > > > want to make sure you can deploy the compute nodes, just select > > the > > > > core OSCAR packages and try to deploy your cluster. So far, i > had > > > no > > > > bug reports about the core itself, only a few configuration > files > > > were > > > > off. > > > > > > > > If you want to install all the OSCAR packages, including OSCAR > > > > packages that were developed by contributors for which i did > not > > > > control the quality yet, i am pretty sure that you will not > find > > a > > > > single configuration. > > > > OSCAR is NOT a product, nobody can guarantee service and > overlook > > > all > > > > OSCAR packages at the moment. > > > > > > > > Regards, > > > > > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > > > > > > Can you log in to the nodes? > > > > > > > > > > Since step 3 fails I cannot proceed to nodes installation. So > I > > > > have > > > > > no nodes installed and hence I cannot login to any of them. > > > > > > > > > > Could you advise me at this point some prior CentOS (or any > > other > > > > OS) > > > > > + OSCAR versions pair which I can possibly try? > > > > > > > > > > Best of luck, > > > > > Nikita > > > > > > > > > > -----Original Message----- > > > > > From: geoffroy.val...@free.fr [mailto:geoffroy.val...@free.fr] > > > > > > Sent: Friday, February 11, 2011 8:55 PM > > > > > To: Nikita Andreev > > > > > Cc: oscar-users@lists.sourceforge.net > > > > > Subject: Re: [Oscar-users] Problem with GUI on CentOS 5.5 > > > > > > > > > > Dear Nikita, > > > > > > > > > > A configuration script from Torque (package i am currently > > trying > > > > to > > > > > fix) failed, i will have a look as soon as possible. > Otherwise, > > > > please > > > > > do not pay attention to the messages "Error: No matching > > Packages > > > > to > > > > > list" > > > > > > > > > > > > > > > > > > > > http://svn.oscar.openclustergroup.org/trac/osca/wiki/faq_install#DuringStep4:BuildOSCARClientImagethefollowingmessageappearsmanytimes:Error:NomatchingPackagestolist. > > > > > > > > > > Can you log in to the nodes? > > > > > > > > > > Regards, > > > > > > > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > > > > > > > Dear Geoffroy, > > > > > > > > > > > > I've tried to unselect LAM and another error has showed up. > > > Find > > > > > logs > > > > > > attached. GUI says that installation was unsuccessful. > > Console > > > > says > > > > > > that installation is complete but I clearly see errors > above > > in > > > > > > console log. > > > > > > > > > > > > Regards, > > > > > > Nikita > > > > > > > > > > > > -----Original Message----- > > > > > > From: geoffroy.val...@free.fr > [mailto:geoffroy.val...@free.fr] > > > > > > > > Sent: Thursday, February 10, 2011 10:41 PM > > > > > > To: Nikita Andreev > > > > > > Cc: oscar-users@lists.sourceforge.net > > > > > > Subject: Re: [Oscar-users] Problem with GUI on CentOS 5.5 > > > > > > > > > > > > Dear Nikita, > > > > > > > > > > > > Can you please unselect LAM and try to deploy the cluster? > I > > > > opened > > > > > a > > > > > > ticket about LAM, i will have a look as soon as possible (i > > do > > > > not > > > > > > know why there is a dependency to libtorque, it does not > make > > > > much > > > > > > sense to me). > > > > > > > > > > > > http://svn.oscar.openclustergroup.org/trac/oscar/ticket/600 > > > > > > > > > > > > Regards, > > > > > > > > > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > > > > > > > > > Dear Geoffroy, > > > > > > > > > > > > > > I've reinstalled OS and chosen unstable repo. Another > > > > dependency > > > > > > > problem has shown up. Find logs attached. > > > > > > > > > > > > > > Switcher still doesn't see MPI implementations. Don't > know > > if > > > > it > > > > > > has > > > > > > > something to do with this dependency problem. > > > > > > > > > > > > > > Glad to be of help. > > > > > > > > > > > > > > Regards, > > > > > > > Nikita > > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: Nikita Andreev [mailto:n...@kemsu.ru] > > > > > > > Sent: Thursday, February 10, 2011 11:55 AM > > > > > > > To: geoffroy.val...@free.fr > > > > > > > Cc: oscar-users@lists.sourceforge.net > > > > > > > Subject: Re: [Oscar-users] Problem with GUI on CentOS 5.5 > > > > > > > > > > > > > > > To really fix step 3, a modification of a script was > > > needed. > > > > If > > > > > > you > > > > > > > are using Torque, i even advice you to switch to > > "unstable". > > > > > > > > > > > > > > > To really fix step 4, the scripts must be fixed so that > > > > > > everything > > > > > > > can run smoothly. Otherwise, OSCAR detects that a script > > > failed > > > > > and > > > > > > > therefore cannot complete the step. Again, if you accept > of > > > > using > > > > > > the > > > > > > > updated packages, switcher will not catch errors anymore > > and > > > > > > > everything should run smoothly. > > > > > > > > > > > > > > Image creation just failed with error Error: Missing > > > > Dependency: > > > > > > > torque-oscar = 2.1.10-4 is needed by package > > > > > > > torque-oscar-modulefile-2.1.10-4.noarch > > > > (unstable_rhel-5-x86_64) > > > > > > > > > > > > > > I will try to test unstable ASAP. > > > > > > > > > > > > > > > Also, when you question the competences of someone, > this > > > > could > > > > > be > > > > > > > interpreted as insulting, there is nothing surprising > > there. > > > So > > > > > > before > > > > > > > to question someone's expertise, the minimum you could do > > is > > > to > > > > > > check > > > > > > > the position of the person in the project. > > > > > > > > > > > > > > Again, my apologies. I really didn't mean it. > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > > > > > > > > > > > Dear Geoffroy, > > > > > > > > > > > > > > > > I do not know where I've insulted you, but anyway if > I've > > > > said > > > > > > > > anything inappropriate I would like to apologize. I > > greatly > > > > > > > appreciate > > > > > > > > your work as an OSCAR developer and I didn't mean to > > offend > > > > you > > > > > > in > > > > > > > any > > > > > > > > way. You're doing a great job. > > > > > > > > > > > > > > > > To my question. It's seems that there is some > > > > misunderstanding. > > > > > > > > Regarding problem with Torque in step 3 as I said in > > first > > > > > letter > > > > > > I > > > > > > > > solved it just by rebuilding opkg-torque-server > package. > > I > > > > > > > downloaded > > > > > > > > it and changed .spec file so that it depended on > > > > > > > > torque-oscar-modulefile instead of torque-modulefile. > And > > > > step > > > > > 3 > > > > > > > went > > > > > > > > fine from that point. > > > > > > > > > > > > > > > > Regarding step 4. I had GUI issue with error message in > > > > console > > > > > I > > > > > > > > quoted below. > > > > > > > > > > > > > > > > I've just updated OSCAR from 6.0.3 to 6.1.0 a minute > ago > > by > > > > > `yum > > > > > > > > update` command and now GUI works fine. I'm able to run > > > step > > > > 4 > > > > > > and > > > > > > > > waiting right now for image to be created. > > > > > > > > > > > > > > > > The only issue I still have is switcher. When I go into > > > > > > configuring > > > > > > > > switcher window from GUI I see: “No pkg_config were > > > supplied > > > > by > > > > > > any > > > > > > > > OSCAR packages – nothing to configure”. I choose > openmpi, > > > > mpich > > > > > > and > > > > > > > > lam to install so it has to see those mpi > > implementations. > > > > > > > > > > > > > > > > Regards, > > > > > > > > Nikita > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > From: geoffroy.val...@free.fr > > > [mailto:geoffroy.val...@free.fr] > > > > > > > > > > > > Sent: Thursday, February 10, 2011 10:15 AM > > > > > > > > To: Nikita Andreev > > > > > > > > Cc: oscar-users@lists.sourceforge.net > > > > > > > > Subject: Re: [Oscar-users] Problem with GUI on CentOS > 5.5 > > > > > > > > > > > > > > > > Nikita, > > > > > > > > > > > > > > > > As i said, you may want to try to _not_ install the > > > > third-part > > > > > > > > packages that are creating the problems, the core of > > OSCAR > > > > > should > > > > > > > work > > > > > > > > pretty well (a user found a problem in C3 but we > already > > > have > > > > a > > > > > > fix > > > > > > > > that should be available very shortly). It is not a > > > question > > > > of > > > > > > > > version of distribution but only that i cannot fix all > > the > > > > bugs > > > > > > > right > > > > > > > > away. > > > > > > > > > > > > > > > > So please, try to new packages. Obviously the problems > > you > > > > are > > > > > > > facing > > > > > > > > are because of these issues and if you are still > blocked, > > > it > > > > > > means > > > > > > > > that you did not really fixed them. I try to be > reactive, > > > to > > > > > help > > > > > > > you, > > > > > > > > so could you please try to do what i suggest to you? > That > > > > will > > > > > > > really > > > > > > > > help. > > > > > > > > So to summarize, i pushed new RPMs for Torque in > > unstable, > > > i > > > > > > really > > > > > > > > advice you to test them. I am about to push new > packages > > > for > > > > > > > Ganglia > > > > > > > > too, i really advice you to use these packages too. If > > you > > > do > > > > > not > > > > > > > want > > > > > > > > to use these packages, i will not be able to help you. > > > > > > > > > > > > > > > > BTW, if you fixed a problem by yourself, could you at > > least > > > > > > > explained > > > > > > > > what you did? Otherwise i do not see how OSCAR could > get > > > > > better; > > > > > > > this > > > > > > > > is an open source project, if i do not get feedback, > > there > > > is > > > > > no > > > > > > > point > > > > > > > > of continuing on my side, i could maintain OSCAR on my > > side > > > > for > > > > > > my > > > > > > > own > > > > > > > > needs and do not distribute it. > > > > > > > > > > > > > > > > BTW, i am an OSCAR developer and the project chair, and > i > > > do > > > > > not > > > > > > > > appreciate the fact that you question my position in > the > > > > > project, > > > > > > > this > > > > > > > > is almost insutling. My name is official displayed on > the > > > > > > website, > > > > > > > and > > > > > > > > not difficult to find: > > > > > > > > > > http://svn.oscar.openclustergroup.org/trac/oscar/wiki/Team > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > > > > > > > > > > > > > > Based on your logs, many packages failed to > install: > > > > > > > > > disable-services, ganglia, lam, maui, mpich, > ntpconfig, > > > > > > openmpi, > > > > > > > > > opium, torque > > > > > > > > > > > > > > > > > > Please look below. I fixed torque problem by myself > and > > > > > > > everything > > > > > > > > > went fine until step 4. disable-services, ganglia, > lam, > > > > maui, > > > > > > > > mpich, > > > > > > > > > ntpconfig, openmpi, opium and torque installs just > > fine. > > > > > > > > > > > > > > > > > > > These packages are third-party packages and based > on > > > the > > > > > > logs, > > > > > > > i > > > > > > > > > cannot tell you why they were not installed > > successfully. > > > > So > > > > > > the > > > > > > > > first > > > > > > > > > thing i advice you to do is to unselect these > packages > > > > using > > > > > > > > selector > > > > > > > > > and try to deploy again the cluster. > > > > > > > > > > > > > > > > > > Proceed through the logs down below and you will find > > > that > > > > > > actual > > > > > > > > > error is some GUI bug in step 4. It pops up just > after > > I > > > > push > > > > > > the > > > > > > > > > button in GUI. > > > > > > > > > > > > > > > > > > > Finally, about your question about PBS, remember > that > > > > this > > > > > is > > > > > > a > > > > > > > > free > > > > > > > > > software and that i am working on OSCAR on my free > time > > > > > > > > > > > > > > > > > > I understand. > > > > > > > > > > > > > > > > > > So the point is that I can't install OSCAR on top of > > > CentOS > > > > > > 5.5. > > > > > > > > Since > > > > > > > > > it's a clean vanilla installation it should be common > > for > > > > > > CentOS > > > > > > > > 5.5 > > > > > > > > > for everyone. I fully understand that there is no > > > official > > > > > > > support > > > > > > > > > from OSCAR and I'm on my own. But OSCAR have to > install > > > at > > > > > > least > > > > > > > on > > > > > > > > > some versions of CentOS. Can you give my some clue? > > Maybe > > > I > > > > > > > should > > > > > > > > try > > > > > > > > > CentOS 5.4? It's a tedious and time consuming process > > of > > > > > > > > reinstalling > > > > > > > > > everything that's why I would be much more optimistic > > if > > > > this > > > > > > > > advice > > > > > > > > > will come from OSCAR developers. > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > Nikita > > > > > > > > > > > > > > > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > > > > > > > > > > > > > > > Dear Geoffroy, > > > > > > > > > > > > > > > > > > > > I want to emphasize that main problem is not > Torque. > > It > > > > > seems > > > > > > > > like > > > > > > > > > > it's a problem with GUI which doesn't allow me to > > > install > > > > > > OSCAR > > > > > > > > at > > > > > > > > > > all. Neither with Torque nor without it. > > > > > > > > > > > > > > > > > > > > Which version of OSCAR prior to version 6.1.0 is > > > stable? > > > > > > > > > > > > > > > > > > > > Are all CentOS versions supported or only specific > > > > > versions? > > > > > > > > > > > > > > > > > > > > By the way, why Torque won't be supported? Which > PBS > > > will > > > > > be > > > > > > > > > supported > > > > > > > > > > then? > > > > > > > > > > > > > > > > > > > > Thank you for your time. > > > > > > > > > > > > > > > > > > > > Sincerely, > > > > > > > > > > Nikita > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > From: geoffroy.val...@free.fr > > > > > [mailto:geoffroy.val...@free.fr] > > > > > > > > > > > > > > > > Sent: Wednesday, February 09, 2011 1:56 AM > > > > > > > > > > To: oscar-users@lists.sourceforge.net > > > > > > > > > > Cc: n...@kemsu.ru > > > > > > > > > > Subject: Re: [Oscar-users] Problem with GUI on > CentOS > > > 5.5 > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > I am having problems with Torque since a while > > > > > (dependencies > > > > > > > > issues > > > > > > > > > > and problems building the binary packages). > > > > Unfortunately, > > > > > i > > > > > > do > > > > > > > > not > > > > > > > > > > have the time to fix that specific issue at the > > moment, > > > > > since > > > > > > i > > > > > > > > am > > > > > > > > > > focusing on the release of oscar-6.1.0 (which will > > > _not_ > > > > > > > support > > > > > > > > > > Torque at first). > > > > > > > > > > > > > > > > > > > > A ticket is open related to that problem: > > > > > > > > > > > > > > http://svn.oscar.openclustergroup.org/trac/oscar/ticket/572 > > > > > > > > > > > > > > > > > > > > Once OSCAR-6.1.0 will be released, i will focus on > > > fixing > > > > > all > > > > > > > > known > > > > > > > > > > issues related to OPKGs, the goal of 6.1.0 being to > > > > provide > > > > > a > > > > > > > > > robust > > > > > > > > > > OSCAR core. > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > > > > > > > ----- "Nikita Andreev" <n...@kemsu.ru> a écrit : > > > > > > > > > > > > > > > > > > > > > I’m trying to deploy a cluster from CentOS 5.5 > > x86_64 > > > > > with > > > > > > > > OSCAR > > > > > > > > > > > 6.0.5. It’s a fresh install. I had a problem with > > > > > > > > > torque-modulefile > > > > > > > > > > > dependency with the following error: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > opkg-torque-server-2.1.13-1.noarch from > > > > > > > unstable_rhel-5-x86_64 > > > > > > > > > has > > > > > > > > > > > depsolving problems > > > > > > > > > > > > > > > > > > > > > > --> Missing Dependency: torque-modulefile is > needed > > > by > > > > > > > package > > > > > > > > > > > opkg-torque-server-2.1.13-1.noarch > > > > > (unstable_rhel-5-x86_64) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I’ve resolved it by manually downloading > > > > > opkg-torque-server > > > > > > > and > > > > > > > > > > > rebuilding with torque-oscar-modulefile > dependency > > > > which > > > > > I > > > > > > > > > believe > > > > > > > > > > is > > > > > > > > > > > correct. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > At the moment I have two issues I can’t resolve > by > > > > > myself: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. When I go into configuring switcher from the > GUI > > I > > > > > see: > > > > > > > “No > > > > > > > > > > > pkg_config were supplied by any OSCAR packages – > > > > nothing > > > > > to > > > > > > > > > > > configure”. There should be something to > configure > > > > since > > > > > I > > > > > > > > choose > > > > > > > > > > > openmpi, mpich and lam to install. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. I can’t invoke 4th step. I get the following > > error > > > > > (find > > > > > > > log > > > > > > > > > > > attached): > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Tk::Error: Can't set -options to > `ARRAY(0xd34c710)' > > > for > > > > > > > > > > > Tk::Optionmenu=HASH(0xd360660): No -label at > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/Tk/Widget.pm > > > > > > > > > > > line 256 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If CentOS 5.5 isn’t supported then please provide > > me > > > > with > > > > > > > > > supported > > > > > > > > > > > version. Is it 5.4? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Another question would be why all necessary > > packages > > > > like > > > > > > > > torque, > > > > > > > > > > > maui, etc .. are under “Experimental” package > set? > > Is > > > > > OSCAR > > > > > > > > 6.0.5 > > > > > > > > > > an > > > > > > > > > > > unstable version and I should rollback to version > > 5? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > > > > > > > > > Nikita > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > > > > The ultimate all-in-one performance toolkit: > > Intel(R) > > > > > > > Parallel > > > > > > > > > > Studio > > > > > > > > > > > XE: > > > > > > > > > > > Pinpoint memory and threading errors before they > > > > happen. > > > > > > > > > > > Find and fix more than 250 security defects in > the > > > > > > > development > > > > > > > > > > cycle. > > > > > > > > > > > Locate bottlenecks in serial and parallel code > that > > > > limit > > > > > > > > > > > performance. > > > > > > > > > > > http://p.sf.net/sfu/intel-dev2devfeb > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > Oscar-users mailing list > > > > > > > > > > > Oscar-users@lists.sourceforge.net > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/oscar-users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > The ultimate all-in-one performance toolkit: Intel(R) > > > Parallel > > > > > > Studio > > > > > > > XE: > > > > > > > Pinpoint memory and threading errors before they happen. > > > > > > > Find and fix more than 250 security defects in the > > > development > > > > > > cycle. > > > > > > > Locate bottlenecks in serial and parallel code that limit > > > > > > > performance. > > > > > > > http://p.sf.net/sfu/intel-dev2devfeb > > > > > > > _______________________________________________ > > > > > > > Oscar-users mailing list > > > > > > > Oscar-users@lists.sourceforge.net > > > > > > > https://lists.sourceforge.net/lists/listinfo/oscar-users ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Oscar-users mailing list Oscar-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/oscar-users
