I was previously using the toolchain that came with the FriendlyArm
DVD so I thought I might compile some of the OSELAS.Toolchain() ones.
My steps and results are as follows.
$ ptxdist version
2012.07.0
$ ptxdist select configs/ptxconfig
info: selected ptxconfig:
'configs/ptxconfig'
ptxdist platform configs/platform-friendlyarm-mini6410/platformconfig
info: selected platformconfig:
'configs/platform-friendlyarm-mini6410/platformconfig'
found and using toolchain:
'/opt/OSELAS.Toolchain-2011.03.0/arm-1136jfs-linux-gnueabi/gcc-4.5.2-glibc-2.13-binutils-2.21-kernel-2.6.36-sanitized/bin'
ptxdist go
error: The ptxconfig file version and ptxdist version do not match:
configfile version: 2011.10.1
ptxdist version: 2012.07.0
You can either migrate from an older ptxdist release with:
'ptxdist migrate'
or, to ignore this error, add '--force'
to ptxdist's parameters, e.g.:
'ptxdist --force go'
ptxdist --force -n5 go
[After a while doing some work]
---------------------
target: kmod-9.tar.xz
---------------------
error: empty parameter to 'ptxd_make_get'
make: ***
[/home/username/PTXdist/projects/OSELAS.BSP-Pengutronix-Mini6410-2011.11.0/src/kmod-9.tar.xz]
Error 1
On Tue, Jul 3, 2012 at 8:50 AM, Juergen Beisert <[email protected]> wrote:
>
> Hi Steve,
>
> please keep the mailing list at least on CC.
>
> Steve Juma wrote:
> > On 02/07/12 21:21, Juergen Beisert wrote:
> > > Steve Juma wrote:
> > >> Anybody else unable to compile the current version of the Mini6410
> > >> BSP
> > >> with PTXdist. The build stalls with the following error message.
> > [...]
> >
> > >>
> > >> Using current version of the BSP and ptxdist version 2012.06.0
> > >
> > > What do you mean with "current version of the BSP"? The 2011.11.0
> > > release? Or the current content of the GIT repository?
> > >
> > > And: the Mini6410 BSP still uses the u-boot-1.1.6, and not the 2011.12
> > > release of u-boot you are using.
> > >
> > > To avoid any guessing: what did you really do?
> >
> > I meant the 2011.11.0 release not the current content from GIT. I
> > thought the Mini6410 BSP uses u-boot-1.1.6 which is why i find the error
> > even more puzzling.
> >
> > Basically all I did,
> > Extracted the BSP set the config file to the one provided,
> > Set the platform
> > Set the toolchain
> >
> > Did a ptxdist go. And it comes up with that error message.
>
> Hmm.
>
> $ ptxdist --version
> 2012.06.0
> $ tar xf OSELAS.BSP-Pengutronix-Mini6410-2011.11.0.tgz
> $ cd OSELAS.BSP-Pengutronix-Mini6410-2011.11.0
> $ ptxdist platform configs/platform-friendlyarm-mini6410/platformconfig
> $ ptxdist select configs/ptxconfig
> $ ptxdist go
> error: The ptxconfig file version and ptxdist version do not match:
>
> configfile version: 2011.10.1
> ptxdist version: 2012.06.0
>
> You can either migrate from an older ptxdist release with:
> 'ptxdist migrate'
>
> or, to ignore this error, add '--force'
> to ptxdist's parameters, e.g.:
> 'ptxdist --force -n5 go'
>
> And what did you then?
>
> Regards,
> Juergen
>
> --
> Pengutronix e.K. | Juergen Beisert
> |
> Linux Solutions for Science and Industry | http://www.pengutronix.de/
> |
