and here the bootlog, sorry
Am 02.03.2015 um 10:03 schrieb Juergen Borleis:
Hi Rudi,
On Saturday 28 February 2015 11:16:14 Lappies wrote:
[...]
Hm, hardware issue?
SDCard or the mini itself?
I dont have a nother SDCard to hand to test.
[...]
mmc: Probing for SDHC ...
mmc: SD 2.0 or later card found
trying to detect SD Card...
Manufacturer: 0x03, OEM "SD"
Product name: "SD04G", revision 8.0
Serial number: 2156201412
Manufacturing date: 8/2009
CRC: 0x56, b0 = 1
READ_BL_LEN=15, C_SIZE_MULT=0, C_SIZE=365
size = 0
SD Card detected RCA: 0x8c3b type: SDHC
1574144 bytes read
[...]
It seems you load the kernel from the SD card, don't you? If you do so, I guess
now there is no hardware issue.
[...]
See attachment for whole boot log.
[...]
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-rtc s3c2410-rtc: setting system clock to 2015-02-28 10:03:38 UTC
(1425117818)
Waiting for root device /dev/mmcblk0p3...
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
mmc0: new SDHC card at address 8c3b
mmcblk0: mmc0:8c3b SD04G 3.69 GiB (ro)
mmcblk0: p1 p2 p3
[...]
Looks correctly to me.
Please do the following: run "ptxdist kernelconfig" and enable
General setup --->
-*- Configure standard kernel features (expert users) --->
[*] Load all symbols for debugging/ksymoops
[*] Include all symbols in kallsyms
Rebuild and boot this kernel. This will show the stack backstrace with symbols
which may help to find the real cause of your kernel Oops.
Regards,
Juergen
## Booting kernel from Legacy Image at 32000000 ...
Image Name: Linux-2.6.39.1
Created: 2015-03-05 17:04:05 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1773384 Bytes = 1.7 MB
Load Address: 30008000
Entry Point: 30008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.39.1 (root@testbox) (gcc version 4.3.2 (Sourcery G++ Lite
2008q3-72) ) #3 Thu Mar 5 18:02:50 CET 2015
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: MINI2440
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttySAC0,115200 root=/dev/mmcblk0p3 rootfstype=ext3
mini2440=3tb rw rootwait
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61236k/61236k available, 4300k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc4800000 - 0xf6000000 ( 792 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0022000 ( 104 kB)
.text : 0xc0022000 - 0xc0346594 (3218 kB)
.data : 0xc0348000 - 0xc0367760 ( 126 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:85
irq: clearing pending status 02000000
irq: clearing subpending status 00000002
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 201.52 BogoMIPS (lpj=503808)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
MINI2440: Option string mini2440=3tb
MINI2440: LCD
0:240x320
1:800x480
2:1024x768
[3:240x320]
4:640x480
5:240x320
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
s3c-adc s3c24xx-adc: attached adc driver
S3C24XX CPU Frequency driver, s3c244x cpu support
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c: slave address 0x10
s3c-i2c s3c2440-i2c: bus frequency set to 98 KHz
s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.24.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 119
io scheduler noop registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 60x53
fb0: s3c2410fb frame buffer device
s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 16 bytes/write
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
s3c24xx-nand s3c2440-nand: NAND soft ECC
s3c24xx-nand s3c2440-nand: Using flash based BBT
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V
8-bit)
Creating 4 MTD partitions on "nand":
0x000000000000-0x000000040000 : "u-boot"
ftl_cs: FTL header not found.
0x000000040000-0x000000060000 : "u-boot-env"
ftl_cs: FTL header not found.
0x000000060000-0x000000560000 : "kernel"
ftl_cs: FTL header not found.
0x000000560000-0x000010000000 : "root"
ftl_cs: FTL header not found.
dm9000 Ethernet Driver, V1.31
eth0: dm9000e at c4890300,c4894304 IRQ 51 MAC: 08:08:11:18:12:27 (chip)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
mousedev: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
samsung-ts s3c2440-ts: driver attached, registering input device
input: S3C24XX TouchScreen as /devices/virtual/input/input1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
Driver for 1-wire Dallas network protocol.
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdi s3c2440-sdi: powered down.
s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ
s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
leds-gpio: probe of leds-gpio.1 failed with error -16
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
ALSA device list:
No soundcards found.
TCP cubic registered
s3c-rtc s3c2410-rtc: setting system clock to 2015-03-05 16:15:46 UTC
(1425572146)
Waiting for root device /dev/mmcblk0p3...
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
s3c-sdi s3c2440-sdi: powered down.
mmc0: error -110 whilst initialising SD card
s3c-sdi s3c2440-sdi: powered down.
s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
s3c-sdi s3c2440-sdi: running at 299kHz (requested: 300kHz).
s3c-sdi s3c2440-sdi: running at 299kHz (requested: 300kHz).
s3c-sdi s3c2440-sdi: running at 299kHz (requested: 300kHz).
s3c-sdi s3c2440-sdi: running at 299kHz (requested: 300kHz).
s3c-sdi s3c2440-sdi: running at 299kHz (requested: 300kHz).
s3c-sdi s3c2440-sdi: running at 299kHz (requested: 300kHz).
s3c-sdi s3c2440-sdi: running at 299kHz (requested: 300kHz).
s3c-sdi s3c2440-sdi: powered down.
mmc0: error -110 whilst initialising SD card
s3c-sdi s3c2440-sdi: powered down.
s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
s3c-sdi s3c2440-sdi: running at 199kHz (requested: 200kHz).
s3c-sdi s3c2440-sdi: running at 199kHz (requested: 200kHz).
s3c-sdi s3c2440-sdi: running at 199kHz (requested: 200kHz).
s3c-sdi s3c2440-sdi: running at 199kHz (requested: 200kHz).
s3c-sdi s3c2440-sdi: running at 199kHz (requested: 200kHz).
s3c-sdi s3c2440-sdi: running at 199kHz (requested: 200kHz).
s3c-sdi s3c2440-sdi: running at 199kHz (requested: 200kHz).
s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
mmc0: new SDHC card at address 8c3b
mmcblk0: mmc0:8c3b SD04G 3.69 GiB (ro)
mmcblk0: p1 p2 p3
Unable to handle kernel NULL pointer dereference at virtual address 0000016c
pgd = c0004000
[0000016c] *pgd=00000000
Internal error: Oops: 5 [#1]
last sysfs file:
Modules linked in:
CPU: 0 Not tainted (2.6.39.1 #3)
PC is at blkdev_get+0x20c/0x284
LR is at blkdev_get+0x20c/0x284
pc : [<c00b2cb4>] lr : [<c00b2cb4>] psr: 60000013
sp : c3827e40 ip : c0366f24 fp : 00000083
r10: c0355d68 r9 : c3826000 r8 : c34021c0
r7 : c3402380 r6 : c34021d0 r5 : 00000000 r4 : ffffffe2
r3 : 00000000 r2 : 00000000 r1 : c34023a4 r0 : c041d0f8
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: c000717f Table: 30004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc3826270)
Stack: (0xc3827e40 to 0xc3828000)
7e40: c3402254 c34023a4 00000003 c00b2070 c3827e5c c3407e80 00000000 00000003
7e60: c3827e78 c34021c0 00000083 c0355d68 00008000 00000083 00000000 00000000
7e80: 00000000 c00b2e0c 00008000 c0355d68 c0355d68 c008ddd8 00000000 c01263cc
7ea0: c39bcc00 c38077b8 00000000 000080d0 0000000a 0000000a c00a16c8 00008000
7ec0: c3806780 c0355d68 c0355d68 00000000 c39bcc00 c00e0050 c00e1a64 00008000
7ee0: c39bcc20 c008ce84 c0355d68 00008000 00008000 c3806780 c39bcc20 c00a29e0
7f00: 00008000 c39bcc20 00000000 c39bcc00 c0355d68 c00a2a5c 00008000 00008000
7f20: 00000020 00000000 c39bcc20 c00a3108 0000000a c00741b8 0000000a 00000000
7f40: c38060a0 c3401280 00000000 c3814000 c02e56db 00008000 c02e56db 00000000
7f60: 00000000 c00a31f0 00000000 00000600 00000004 00000000 c39bcc20 c39bcc00
7f80: 00000000 c3811000 c001d248 c3811000 00008000 c0008bd4 00000000 c0268fdc
7fa0: 00000080 00200200 ffff16c9 c3811000 c0352588 0b300003 c02e56db c00237e4
7fc0: c001d258 c001d248 c00237e4 00000013 00000000 c0008f04 fffffffe 20000013
7fe0: ffffff9c c03677a0 c0008344 c0008440 00000000 c00237e4 00000000 00000000
[<c00b2cb4>] (blkdev_get+0x20c/0x284) from [<c00b2e0c>]
(blkdev_get_by_path+0x28/0x64)
[<c00b2e0c>] (blkdev_get_by_path+0x28/0x64) from [<c008ddd8>]
(mount_bdev+0x30/0x184)
[<c008ddd8>] (mount_bdev+0x30/0x184) from [<c00e0050>] (ext3_mount+0x10/0x18)
[<c00e0050>] (ext3_mount+0x10/0x18) from [<c008ce84>] (mount_fs+0x10/0xb8)
[<c008ce84>] (mount_fs+0x10/0xb8) from [<c00a29e0>] (vfs_kern_mount+0x50/0x88)
[<c00a29e0>] (vfs_kern_mount+0x50/0x88) from [<c00a2a5c>]
(do_kern_mount+0x34/0xc8)
[<c00a2a5c>] (do_kern_mount+0x34/0xc8) from [<c00a3108>] (do_mount+0x618/0x67c)
[<c00a3108>] (do_mount+0x618/0x67c) from [<c00a31f0>] (sys_mount+0x84/0xc4)
[<c00a31f0>] (sys_mount+0x84/0xc4) from [<c0008bd4>]
(mount_block_root+0x100/0x2ac)
[<c0008bd4>] (mount_block_root+0x100/0x2ac) from [<c0008f04>]
(prepare_namespace+0x120/0x178)
[<c0008f04>] (prepare_namespace+0x120/0x178) from [<c0008440>]
(kernel_init+0xfc/0x138)
[<c0008440>] (kernel_init+0xfc/0x138) from [<c00237e4>]
(kernel_thread_exit+0x0/0x8)
Code: e3a01000 e1a00007 e5a01024 ebfe62ba (e595216c)
---[ end trace d697e5907ef4d905 ]---
Kernel panic - not syncing: Attempted to kill init!
[<c0027064>] (unwind_backtrace+0x0/0xec) from [<c02683f4>] (panic+0x54/0x17c)
[<c02683f4>] (panic+0x54/0x17c) from [<c00383bc>] (do_exit+0xac/0x61c)
[<c00383bc>] (do_exit+0xac/0x61c) from [<c0025d48>] (die+0x198/0x1c4)
[<c0025d48>] (die+0x198/0x1c4) from [<c0027e1c>] (__do_kernel_fault+0x64/0x84)
[<c0027e1c>] (__do_kernel_fault+0x64/0x84) from [<c0027ff4>]
(do_page_fault+0x1b8/0x1cc)
[<c0027ff4>] (do_page_fault+0x1b8/0x1cc) from [<c00222d4>]
(do_DataAbort+0x34/0x94)
[<c00222d4>] (do_DataAbort+0x34/0x94) from [<c0022ae0>] (__dabt_svc+0x40/0x60)
Exception stack(0xc3827df8 to 0xc3827e40)
7de0: c041d0f8 c34023a4
7e00: 00000000 00000000 ffffffe2 00000000 c34021d0 c3402380 c34021c0 c3826000
7e20: c0355d68 00000083 c0366f24 c3827e40 c00b2cb4 c00b2cb4 60000013 ffffffff
[<c0022ae0>] (__dabt_svc+0x40/0x60) from [<c00b2cb4>] (blkdev_get+0x20c/0x284)
[<c00b2cb4>] (blkdev_get+0x20c/0x284) from [<c00b2e0c>]
(blkdev_get_by_path+0x28/0x64)
[<c00b2e0c>] (blkdev_get_by_path+0x28/0x64) from [<c008ddd8>]
(mount_bdev+0x30/0x184)
[<c008ddd8>] (mount_bdev+0x30/0x184) from [<c00e0050>] (ext3_mount+0x10/0x18)
[<c00e0050>] (ext3_mount+0x10/0x18) from [<c008ce84>] (mount_fs+0x10/0xb8)
[<c008ce84>] (mount_fs+0x10/0xb8) from [<c00a29e0>] (vfs_kern_mount+0x50/0x88)
[<c00a29e0>] (vfs_kern_mount+0x50/0x88) from [<c00a2a5c>]
(do_kern_mount+0x34/0xc8)
[<c00a2a5c>] (do_kern_mount+0x34/0xc8) from [<c00a3108>] (do_mount+0x618/0x67c)
[<c00a3108>] (do_mount+0x618/0x67c) from [<c00a31f0>] (sys_mount+0x84/0xc4)
[<c00a31f0>] (sys_mount+0x84/0xc4) from [<c0008bd4>]
(mount_block_root+0x100/0x2ac)
[<c0008bd4>] (mount_block_root+0x100/0x2ac) from [<c0008f04>]
(prepare_namespace+0x120/0x178)
[<c0008f04>] (prepare_namespace+0x120/0x178) from [<c0008440>]
(kernel_init+0xfc/0x138)
[<c0008440>] (kernel_init+0xfc/0x138) from [<c00237e4>]
(kernel_thread_exit+0x0/0x8)
