Hi,

  In the barebox code I see the value being set for the BANKCON4
register is 0x1F4C for the DM9000 chip. I am not sure whether this is
right. Trying to derive the values looking at the data sheet I get
this.

Tacs -> 0 clock. (Should it be 1 clock or 10 ns?)
Tcos -> 1 clock. (10 ns). DM9000 datasheet I find it is T1 = 5ns.
Tacc -> 4 clocks (40 ns). DM9000 datasheet I find it is T2 = 22ns but
if nWait is present Tacc >= 4 clocks according to S3C2440 data sheet.
Tcoh -> 1 clock (10 ns).  DM9000 datasheet I find it is T5 = 5ns.
Tcah -> 0 ns (Should it be 1 clock or 10 ns?)
Tacp -> 00
PMC -> 00 (normal).

Could somebody please verify if this is correct?

Thanks in advance.

_______________________________________________
oselas mailing list
oselas@community.pengutronix.de

Reply via email to