Hi, I'm a total noob in using OSG and I would appreciate any advice from the veterans and experts here who have used it in many different projects.
Basically I've to design a CAD/CAM in house tool and I've been reading about OSG and OpenSG for quite some time. I've stumbled upon this FAQ (from faq section on 3drealtimesimulation site - osg_faq_1.htm - which I believe is pretty old) and in one of the sections, the author mentioned that; "One might think of the difference in a historical context as the difference between Inventor and Performer. OpenSG is used primarily in CAD and manufacturing circles (though that may have changed over the years), where frame rates need only be interactive, whereas Open Scene Graph is focused on higher performance real-time rendering. Neither seems to be exclusive of the needs of the other, but our respective expertise shows through in the final emphasis." I believe there has been significant changes to the both frameworks since then that might make the differences to be smaller and smaller. >From a design perspective, what should I take into considerations to achieve >high frame rates and interactivity needed by CAD/CAM solution using OSG? Thank you! Cheers, Faizol ------------------ Read this topic online here: http://forum.openscenegraph.org/viewtopic.php?p=50359#50359 _______________________________________________ osg-users mailing list [email protected] http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
