Hi Zhuwan, I don't user Windows so can't comment on the specifics of this platform, for this I will have to defer to other Windows users.
The one thing I would add is that you --samples value is excessive, try reducing it down. Also with the driver try setting it so it allows the application to set the anti-aliasing setting rather than override it, then run osgviewer with the command line I suggested. Robert. On 10 September 2013 14:28, webmaster <[email protected]> wrote: > hello robert, > > Before snapped the picture and run "osgviewer cow.osg ", already set the > NV driver to force antialias and replace all the programm setting,and now > just tried following .bat file: > cd ./bin > osgviewer --window 600 15 800 800 cow.osg --samples 16 > pause > this is according your suggestion,and the result is still no anti alias > effects. > we running in windows 7 ultimate x64 version > so in these days we tried many different NV 3d cards and different > version drivers,and the problem is still! > This problem confused us many days,so psot it to maillist! > > Thanks > > zhuwan > > 09,10,2013 > > 在2013-9-10 21:14:31，"Robert Osfield" <[email protected]> 写道: > > -----原始邮件----- > *发件人:* "Robert Osfield" <[email protected]> > *发送时间:* 2013-9-10 21:14:31 > *收件人:* "OpenSceneGraph Users" <[email protected]> > *主题:* Re: [osg-users] This is a new BUG which is introduced by OSG3.2? > > > Hi Zhuwan, > > I am not aware of any changes that would introduce a regression in > anti-aliasing, perhaps rather than a bug you have confused the set up of > aliasing. > > The OSG by default does not enable anti-aliasing, this applies to 3.2 the > same with all previous OSG releases. So running the osgviewer with cow.osg > and without the OpenGL driver overrding to switch on anti-aliasing you > should see no anti-aliasing in any OSG version. > > To enable antialising you have to set the Traits::samples and > sampleBuffers values when setting up the GraphicsContext. You can set the > default via the OSG_MULTI_SAMPLES env var, or via the command line i.e. > > osgviewer cow.osg --samples 4 > > I have just tried this on my OSG svn/trunk + Linux/NVidia system and it > works just fine. > > If there has been a difference in behaviour then it'll likely be down to > the OpenGL driver playing games with auto-detecting the software that is > running and choosing defaults. This does happen, but I haven't heard this > happening to osgviewer yet. > > Robert. > > > On 10 September 2013 14:00, webmaster <[email protected]> wrote: > >> Hi all, >> I boughted two NV GTX760 4G DDR5 3D cards,and make them SLI >> successfully,and also tested many other type 3d cards,seems in OSG 3.2's >> viewer window can't do any antalis,the attached snap shot is the NV display >> set,and the runtime snap of "osgviewer.exe cow.osg"! >> Even in single 3d card mode,and tried many NV 3d display card,still is >> zigzaged,and the previouse version of osg which is before 3.2 can do anti >> alias correctly! >> anyone know why? >> Thanks >> >> zhuwan >> 09,10,2013 >> >> >> _______________________________________________ >> osg-users mailing list >> [email protected] >> http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org >> >> > > _______________________________________________ > osg-users mailing list > [email protected] > http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org > >
_______________________________________________ osg-users mailing list [email protected] http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
