Hello Xavier, I did the test with a maxwidth tag. E.g. the bridge https://www.openstreetmap.org/way/26936358
For maxheight it is working. I did the test with a road close to me: https://www.openstreetmap.org/way/47577790 As written earlier maxwidth and width are not working... Best regards, Tom Am Freitag, 13. September 2019 23:41:56 UTC+2 schrieb Xavier: > > On Fri, Sep 13, 2019 at 01:34:53PM -0700, Tom Schulz-Heise wrote: > >did anybody figure out how to modify the routing.xml file in order to > >consider the width and maxwidth of a road? I would like to avoid with my > >motor home too narrow roads & bridges. > > > >Modifications I did to routing.xml but the routing does not consider the > >limitations when set. Attached my modified routing.xml: > > Do the relevant bridges in OSM have maxwidth (and/or maxheight) tags? > > If the bridge does not have those values tagged upon it in OSM then > there is nothing OsmAnd can do, the data is simply not present for > OsmAnd to utilize. > > Spot checking four bridges near me, all crossing an interstate highway, > shows all four without max width or height tags in OSM. > > Same goes for roads, most roads around me also lack width tags. > > However, the data being OSM, you can add these tags yourself if you can > collect the relevant values during your travels, then they will be > present for your own use (and everyone else) later. > > -- You received this message because you are subscribed to the Google Groups "Osmand" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/osmand/b4be31c4-e74f-4b52-b611-dd60786de7e6%40googlegroups.com.
