Hmmm. Do you have "Calculate between points" enabled? If so, I wonder if one of the points is actually on the wrong side of the highway, so that OsmAnd is trying to double back in order to reach it. If that were the case, I would think that the doubling-back would happen whether you exited the expressway or not.
I admit--I'm reaching here in search of a solution. At some point, that resembles a guess. On Tuesday, October 1, 2019 at 4:20:00 PM UTC-7, David Remelts wrote: > > Bart, I finally had a chance to test this. I loaded a GPX route and > exited the expressway at a rest area. I made sure that "Pass along entire > track" was turned off and got back on the expressway. It still wanted me > to get off at the next exit and double back. > > I used a generated route and got off at the same rest area and when I got > back on the expressway it continued along the intended route without > doubling back. > > I was really hoping that the "Pass along entire track" setting would do > the trick because GPX routes are really convenient to use. Oh well... > > On Friday, September 27, 2019 at 8:12:22 PM UTC-4, Bart Eisenberg wrote: >> >> While you're navigating with a GPX, press the the gear icon (Options) in >> the directions menu and look at the setting: "Pass along entire track". It >> should be disabled. >> > -- You received this message because you are subscribed to the Google Groups "Osmand" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/osmand/7099bd77-26c7-48b1-bf8e-379e048c8bbd%40googlegroups.com.
