280 is definitely way too high. Curious that it appears to be going through zero during movement. I'm guessing the other 2 axes have much less output ? If so the By, along phone, would seem to be faulty, although working with too much sensitivity. It's behaving as though a piece of iron/steel is attached to the phone !
I'm sure you've got this, but just in case, a calibration description is the bottom of this webpage, https://stonekick.com/blog/magnometers-accelerometers-and-calibrating-your-android-device.html I'm sure this can be found elsewhere too. On Mon, 27 Jun 2022, 15:32 [email protected], <[email protected]> wrote: > what i would do if this was happening to me, from the first day of problem > appaers > > easy way > - hard reset and immediately on first boot, not even connected to > internet, i will had to check the issue > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/osmand/4e608010-7f85-44e9-80f8-d415a230cac5n%40googlegroups.com > <https://groups.google.com/d/msgid/osmand/4e608010-7f85-44e9-80f8-d415a230cac5n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "OsmAnd" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/osmand/CAMt6mLTW-3tk7%3Dqq2K9yXE4_nDaEOBfPr8w%2Bzk_6pbCHV0i3_w%40mail.gmail.com.
