Hi Thanks for Answer. I just checked and I do not have the Smart Route recalculation option. Do you mean "minimal distance to recalculate route" ? This is set to 120m Or do you mean "In case of reverse direction" ? This is Enabled.
[email protected] schrieb am Sonntag, 20. August 2023 um 15:49:41 UTC+2: > > I think you want to turn on Smart route recalculation or maybe off. You > will need to test. You will find it under Navigation - Settings - > Navigation Settings - Route Parameters. > > As for road blockage just follow the detour is what I do. Or you could > press and hold your finger on the road and then select Actions and finally > Avoid road. I have never done this so again test. > > At any moment, you have a choice, that leads you closer to God or further > from God. > > > > On Sun, Aug 20, 2023 at 3:18 PM Wolfgang Studer <[email protected]> > wrote: > >> Hi there >> First, I have seen the "Turn by Turn navigation of imported gpa" >> discussion, and even if I do the same, I have different questions. >> >> How does my process looks like: >> 1) I create a route based on waypoints in Basecamp on my iMac. >> 2) The route always start and end at my home, where I live but not where >> my motorbike is. >> 3) After route is completed, I export the route, send it towards my >> Android Device and import in Osmand+. >> So far so good >> >> So where's my issues with Osmand+: >> When I start the route in Osmand+, it always requests me to navigate to >> my home point, regardless if this is necessary or not. >> I know I am able to navigate instead to the nearest point, which is of >> course my home, but not the first waypoint. >> So how do I tell Osmand when starting the route, he should skip the first >> starting POI (my home)? >> >> Second question occurs while driving and following the route. A >> construction site suddenly appears and road is blocked. How do I easily >> tell Osmand+ that this road is blocked and Osmand+ has to find another >> route ? >> I know that there is this option with 120m automatic calculation. I had >> this option on and Osmand find me a new route till the next circle, where I >> should take exit 4 and drive exactly back to this closed road. I ignored it >> during the next 5 kilometers where it still wanted me to return to this >> closed road. Then I stopped my bike and the tour on Osmand+ and made the >> rest of the tour based on manually enter the following POI, drive there, >> enter next POI etc. >> >> I'm quite sure, that there is a simple solution inside Osmand+ for both >> of my questions and the error is in front of. Unfortunately I did not find >> any answer to these questions, neither in the manual nor in the many >> available YT videos. >> >> Thanks for advice in advance >> Wolfgang >> >> -- >> You received this message because you are subscribed to the Google Groups >> "OsmAnd" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/osmand/e91b7113-e681-418f-a536-1612c4ea553dn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/osmand/e91b7113-e681-418f-a536-1612c4ea553dn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "OsmAnd" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/osmand/9285da52-d66a-4e63-8108-d25773544837n%40googlegroups.com.
