Hi,
I have tried to install rtlsdr for 64bit using a different procedure,
from here:
http://www.trinityos.com/HAM/CentosDigitalModes/hampacketizing-centos.html#42c.rtlsdr
with the same resuit.
I really don't now what to do ....
Best regards,
Dan
On 10/6/2013 11:37 PM, Sylvain AZARIAN wrote:
This message looks coming from libusb. Maybe you check that lib source
to understand what error code 5 stands for....
Have you tried to run app as root ?
Le 6 oct. 2013 22:34, "Dan" <[email protected]
<mailto:[email protected]>> a écrit :
Hi all,
I have compiled and installed rtl-sdr on CentOS 6 following
instructions.
Everything compiles without errors, but:
- when I run rtl_test I get the following errors:
Found 1 device(s):
0: ezcap USB 2.0 DVB-T/DAB/FM dongle
Using device 0: ezcap USB 2.0 DVB-T/DAB/FM dongle
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4
15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6
40.2 42.1 43.4 43.9 44.5 48.0 49.6
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is
fine.
Reading samples in async mode...
cb transfer status: 5, canceling...
cb transfer status: 5, canceling...
cb transfer status: 5, canceling...
cb transfer status: 5, canceling...
cb transfer status: 5, canceling...
cb transfer status: 5, canceling...
cb transfer status: 5, canceling...
cb transfer status: 5, canceling...
Library error 0, exiting...
If I run rtl_tcp I get the following errors when the client tries
to connect:
Found 1 device(s).
Found Rafael Micro R820T tuner
Using ezcap USB 2.0 DVB-T/DAB/FM dongle
Tuned to 100000000 Hz.
listening...
Use the device argument 'rtl_tcp=192.168.33.99:8767
<http://192.168.33.99:8767>' in OsmoSDR (gr-osmosdr) source
to receive samples in GRC and control rtl_tcp parameters
(frequency, gain, ...).
client accepted!
set freq 145000000
cb transfer status: 5, canceling...
cb transfer status: 5, canceling...
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
set sample rate 1024000
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
set freq correction 4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
worker cond timeout
Signal caught, exiting!
comm recv bye
Signal caught, exiting!
all threads dead..
listening...
The same client connects without errors to another rtl_tcp
instance on a Windows 7 computer, with the same module.
Any help is greatly appreciated.
Thanks,
Dan
