MOSPF has never really been fully specified in RFC 2740 and, to the
best of my knowledge, has never been implemented. Hence, we again had
some discussions about removing it from the respin. I've made the
changes but have not submitting them. I've also attempted to reclaim
the MC-bit in the prefix options since this was never fully specified
either and has proved to be grossly inadequate to separate unicast
and multicast topologies. Please send comments ASAP. If I don't hear
any serious dissent I'll submit the update and we'll do a quick re-WGLC.
Thanks,
Acee
***************
*** 82,89 ****
addition, option handling has been made more flexible.
All of OSPF for IPv4's optional capabilities, including demand
! circuit support, Not-So-Stubby Areas (NSSAs), and the multicast
! extensions to OSPF (MOSPF) are also supported in OSPF for IPv6.
--- 82,89 ----
addition, option handling has been made more flexible.
All of OSPF for IPv4's optional capabilities, including demand
! circuit support and Not-So-Stubby Areas (NSSAs) are also
supported in
! OSPF for IPv6.
***************
*** 828,844 ****
LSAs, network-LSAs, inter-area-prefix-LSAs, inter-area-router-
LSAs,
and intra-area-prefix-LSAs. LSAs with unknown LS type, U-bit
set to
1 (flood even when unrecognized) and area scope also appear in the
! area data structure. IPv6 routers implementing MOSPF add group-
! membership-LSAs to the area data structure. NSSA-LSAs are also
! included in an NSSA area's data structure.
! Coltun, et al. Expires November 12, 2007
[Page 15]
! Internet-Draft OSPF for IPv6 May
2007
3.1.2. The Interface Data structure
--- 828,844 ----
LSAs, network-LSAs, inter-area-prefix-LSAs, inter-area-router-
LSAs,
and intra-area-prefix-LSAs. LSAs with unknown LS type, U-bit
set to
1 (flood even when unrecognized) and area scope also appear in the
! area data structure. NSSA-LSAs are also included in an NSSA area's
! data structure.
!
! Coltun, et al. Expires February 2, 2008
[Page 15]
! Internet-Draft OSPF for IPv6 August
2007
3.1.2. The Interface Data structure
***************
*** 1086,1094 ****
o The Options field within Database Description packets has moved
around, getting larger in the process. More options bits
are now
possible. Those that MUST be set correctly in Database
! Description packets are: The MC-bit is set if and only if the
! router is forwarding multicast datagrams according to the MOSPF
! specification in [MOSPF], and the DC-bit is set if and only
if the
router wishes to suppress the sending of Hellos over the
interface
(see [DEMAND]). Unrecognized bits in the Database Description
packet's Options field should be cleared.
--- 1086,1092 ----
o The Options field within Database Description packets has moved
around, getting larger in the process. More options bits
are now
possible. Those that MUST be set correctly in Database
! Description packets are: The DC-bit is set if and only if the
router wishes to suppress the sending of Hellos over the
interface
(see [DEMAND]). Unrecognized bits in the Database Description
packet's Options field should be cleared.
***************
*** 1577,1591 ****
should be set unless the router will not participate in transit
IPv6
routing. The E-bit should be clear if and only if the attached
area
is an OSPF stub or OSPF NSSA area. The E-bit should always be
set in
! AS scoped LSAs. The MC-bit should be set if and only if the router
! is running MOSPF and the LSA is to be used in the multicast SPF
! computation (see [MOSPF]). The N-bit should be set if and only if
! the attached area is an OSPF NSSA area. The R-bit should be set
! unless the router will not participate in any transit routing. The
! DC-bit should be set if and only if the router can correctly
process
! the DoNotAge bit when it appears in the LS age field of LSAs (see
! [DEMAND]). All unrecognized bits in the Options field should be
! cleared.
The V6-bit and R-bit are only examined in Router-LSAs during
the SPF
computation. In other LSA types containing options, they are
set for
--- 1577,1588 ----
should be set unless the router will not participate in transit
IPv6
routing. The E-bit should be clear if and only if the attached
area
is an OSPF stub or OSPF NSSA area. The E-bit should always be
set in
! AS scoped LSAs. The N-bit should be set if and only if the
attached
! area is an OSPF NSSA area. The R-bit should be set unless the
router
! will not participate in any transit routing. The DC-bit should be
! set if and only if the router can correctly process the DoNotAge
bit
! when it appears in the LS age field of LSAs (see [DEMAND]). All
! unrecognized bits in the Options field should be cleared.
The V6-bit and R-bit are only examined in Router-LSAs during
the SPF
computation. In other LSA types containing options, they are
set for
***************
*** 1603,1610 ****
State ID fields.
To the left of the Options field, the router capability bits V, E,
! and B should be set according to Section 12.4.1 of [OSPFV2]. Bit W
! should be coded according to [MOSPF].
Each of the router's interfaces to the area are then described by
appending "link descriptions" to the router-LSA. Each link
--- 1600,1606 ----
State ID fields.
To the left of the Options field, the router capability bits V, E,
! and B should be set according to Section 12.4.1 of [OSPFV2].
Each of the router's interfaces to the area are then described by
appending "link descriptions" to the router-LSA. Each link
***************
*** 1732,1748 ****
! Coltun, et al. Expires November 12, 2007
[Page 31]
! Internet-Draft OSPF for IPv6 May
2007
Designated Router.
o The Options field in the network-LSA is set to the logical
OR of
the Options fields contained within the link's associated link-
! LSAs. In this way, the network link exhibits a capability
when at
! least one of the link's routers requests that the capability be
advertised.
As an example, assuming that Router RT4 has been elected
Designated
--- 1732,1749 ----
! Coltun, et al. Expires February 2, 2008
[Page 31]
! Internet-Draft OSPF for IPv6 August
2007
Designated Router.
o The Options field in the network-LSA is set to the logical
OR of
the Options fields contained within the link's associated link-
! LSAs corresponding to fully adjacent neighbors. In this way,
the
! network link exhibits a capability when at least one fully
! adjacent neighbor on the link requests that the capability be
advertised.
As an example, assuming that Router RT4 has been elected
Designated
***************
*** 1787,1801 ****
!
! Coltun, et al. Expires November 12, 2007
[Page 32]
! Internet-Draft OSPF for IPv6 May
2007
! o The NU-bit in the PrefixOptions field should be clear. The
coding
! of the MC-bit depends upon whether, and if so how, MOSPF is
! operating in the routing domain (see [MOSPF]).
o Link-local addresses MUST never be advertised in inter-area-
prefix-LSAs.
--- 1788,1799 ----
! Coltun, et al. Expires February 2, 2008
[Page 32]
! Internet-Draft OSPF for IPv6 August
2007
! o The NU-bit in the PrefixOptions field should be clear.
o Link-local addresses MUST never be advertised in inter-area-
prefix-LSAs.
***************
*** 1894,1916 ****
Address Prefix fields embedded within the LSA body. Network
Mask
is no longer specified.
! o The NU-bit in the PrefixOptions field should be clear. The
coding
! of the MC-bit depends upon whether, and if so how, MOSPF is
! operating in the routing domain (see [MOSPF]).
!
- Coltun, et al. Expires November 12, 2007
[Page 34]
-
- Internet-Draft OSPF for IPv6 May
2007
! o Link-local addresses can never be advertised in AS-external-
LSAs.
- o The forwarding address is present in the AS-external-LSA if and
- only if the AS-external-LSA's bit F is set.
o The external route tag is present in the AS-external-LSA if and
only if the AS-external-LSA's bit T is set.
--- 1892,1911 ----
Address Prefix fields embedded within the LSA body. Network
Mask
is no longer specified.
! o The NU-bit in the PrefixOptions field should be clear.
+ o Link-local addresses can never be advertised in AS-external-
LSAs.
+ o The forwarding address is present in the AS-external-LSA if and
+ only if the AS-external-LSA's bit F is set.
! Coltun, et al. Expires February 2, 2008
[Page 34]
!
! Internet-Draft OSPF for IPv6 August
2007
o The external route tag is present in the AS-external-LSA if and
only if the AS-external-LSA's bit T is set.
***************
*** 1982,1990 ****
Address Prefix fields embedded within the LSA body. Network
Mask
is no longer specified.
! o The NU-bit in the PrefixOptions field should be clear. The
coding
! of the MC-bit depends upon whether, and if so how, MOSPF is
! operating in the routing domain (see [MOSPF]).
o Link-local addresses can never be advertised in NSSA-LSAs.
--- 1971,1977 ----
Address Prefix fields embedded within the LSA body. Network
Mask
is no longer specified.
! o The NU-bit in the PrefixOptions field should be clear.
o Link-local addresses can never be advertised in NSSA-LSAs.
***************
*** 2450,2475 ****
area-prefix-LSAs (0x2003), inter-area-router-LSAs (0x2004),
NSSA-LSAs
(0x2007), AS-external-LSAs (0x4005), link-LSAs (0x0008), and
Intra-
Area-Prefix-LSAs (0x2009) are assumed to be understood by all
! routers. However, not all LS types are understood by all routers,
! For example, the group-membership-LSA (0x2006) is understood
only by
! MOSPF routers and since it has its U-bit set to 0. This LS Type
! should only be flooded to a non-MOSPF neighbor (determined by
! examining the MC-bit in the neighbor's Database Description
packets'
! Options field) when the neighbor is Designated Router or Backup
! Designated Router for the attached link.
!
! The previous paragraph solves a problem for IPv4 OSPF extensions
such
!
!
!
! Coltun, et al. Expires November 12, 2007
[Page 44]
!
! Internet-Draft OSPF for IPv6 May
2007
!
!
! as MOSPF, which require that the Designated Router support the
! extension in order to have the new LSA types flooded across
broadcast
! and NBMA networks (see Section 10.2 of [MOSPF]).
3.5.3. Installing LSAs in the database
--- 2422,2436 ----
area-prefix-LSAs (0x2003), inter-area-router-LSAs (0x2004),
NSSA-LSAs
(0x2007), AS-external-LSAs (0x4005), link-LSAs (0x0008), and
Intra-
Area-Prefix-LSAs (0x2009) are assumed to be understood by all
! routers. However, all LS types MAY not be understood by all
routers.
! For example, a new LSA type with its U-bit set to 0 MAY only be
! understood by a subset of routers. This new LS Type should only be
! flooded to an OSPF neighbor that understands the LS type or when
the
! neighbor that doesn't understand it is Designated Router or Backup
! Designated Router for the attached link. This allows the LSA to be
! flooded on the local link even if either the router elected
! Designated Router or Backup Designated Router doesn't understand
the
! LS type.
3.5.3. Installing LSAs in the database
***************
*** 3395,3406 ****
neighbor relationships from forming (e.g., the E-bit below); these
mismatches are discovered through the sending and receiving of
Hello
packets. Some option mismatches prevent particular LSA types from
! being flooded across adjacencies (e.g., the MC-bit below); these
are
! discovered through the sending and receiving of Database
Description
! packets. Some option mismatches prevent routers from being
included
! in one or more of the various routing calculations because of their
! reduced functionality (again, the MC-bit is an example); these
! mismatches are discovered by examining LSAs.
Seven bits of the OSPF Options field have been assigned. Each
bit is
described briefly below. Routers should reset (i.e., clear)
--- 3395,3405 ----
neighbor relationships from forming (e.g., the E-bit below); these
mismatches are discovered through the sending and receiving of
Hello
packets. Some option mismatches prevent particular LSA types from
! being flooded across adjacencies these are discovered through the
! sending and receiving of Database Description packets. Some option
! mismatches prevent routers from being included in one or more of
the
! various routing calculations because of their reduced
functionality;
! these mismatches are discovered by examining LSAs.
Seven bits of the OSPF Options field have been assigned. Each
bit is
described briefly below. Routers should reset (i.e., clear)
***************
*** 3414,3429 ****
! Coltun, et al. Expires November 12, 2007
[Page 61]
! Internet-Draft OSPF for IPv6 May
2007
1 2
! 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
! +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+--+-+-+--+--+--+
! | | | | | | | | | | | | | | | | |*|*|DC|R|N|MC| E|V6|
! +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+--+-+-+--+--+--+
The Options field
--- 3413,3429 ----
!
! Coltun, et al. Expires February 2, 2008
[Page 61]
! Internet-Draft OSPF for IPv6 August
2007
1 2
! 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
! +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+--+-+-+-+--+--+
! | | | | | | | | | | | | | | | | |*|*|DC|R|N|x| E|V6|
! +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+--+-+-+-+--+--+
The Options field
***************
*** 3438,3446 ****
This bit describes the way AS-external-LSAs are flooded, as
described in Sections 3.6, 9.5, 10.8, and 12.1.2 of [OSPFV2].
! MC-bit
! This bit describes whether IP multicast datagrams are forwarded
! according to the specifications in [MOSPF].
N-bit
This bit indicates whether or not the router is attached to an
--- 3438,3447 ----
This bit describes the way AS-external-LSAs are flooded, as
described in Sections 3.6, 9.5, 10.8, and 12.1.2 of [OSPFV2].
! x-Bit
! This bit was previously used by MOSPF (see [MOSPF]) which has
been
! deprecated for OSPFv3. It should be set to 0 and ignored upon
! reception. It may be reused in the future.
N-bit
This bit indicates whether or not the router is attached to an
***************
*** 4021,4038 ****
cases or are to be marked as not readvertisable in others.
0 1 2 3 4 5 6 7
! +--+--+--+--+--+--+--+--+
! | | | |DN| P|MC|LA|NU|
! +--+--+--+--+--+--+--+--+
! Coltun, et al. Expires November 12, 2007
[Page 72]
! Internet-Draft OSPF for IPv6 May
2007
The Prefix Options field
--- 4021,4038 ----
cases or are to be marked as not readvertisable in others.
0 1 2 3 4 5 6 7
! +--+--+--+--+--+-+--+--+
! | | | |DN| P|x|LA|NU|
! +--+--+--+--+--+-+--+--+
! Coltun, et al. Expires February 2, 2008
[Page 72]
! Internet-Draft OSPF for IPv6 August
2007
The Prefix Options field
***************
*** 4050,4059 ****
Section 3.4.3.9. An implementation MAY also set the LA-bit for
prefixes advertised with a host PrefixLength (128).
! MC-bit
! The "multicast" capability bit. If set, the prefix should be
! included in IPv6 multicast routing calculations. If not set, it
! should be excluded.
P-bit
The "propagate" bit. Set on NSSA area prefixes that should be
--- 4050,4060 ----
Section 3.4.3.9. An implementation MAY also set the LA-bit for
prefixes advertised with a host PrefixLength (128).
! x-bit
! This bit was previously defined as a "multicast" capability bit.
! However, the use was never adequately specified and it is being
! deprecated. It is set to 0 and ignored upon reception. It
may be
! reused in the future.
P-bit
The "propagate" bit. Set on NSSA area prefixes that should be
***************
*** 4193,4209 ****
The LSA function codes are defined as follows. The origination
and
processing of these LSA function codes are defined elsewhere in
this
! document, except for the group-membership-LSA (see [MOSPF]) and the
! NSSA-LSA (see [NSSA]). As shown below, each LSA function code also
! Coltun, et al. Expires November 12, 2007
[Page 75]
! Internet-Draft OSPF for IPv6 May
2007
! implies a specific setting for the U, S1, and S2 bits.
LSA function code LS Type Description
--- 4193,4210 ----
The LSA function codes are defined as follows. The origination
and
processing of these LSA function codes are defined elsewhere in
this
! document, except for the NSSA-LSA (see [NSSA]) and 0x2006 which was
! previously used by MOSPF (see [MOSPF]). MOSPF has been deprecated
! Coltun, et al. Expires February 2, 2008
[Page 75]
! Internet-Draft OSPF for IPv6 August
2007
! for OSPFv3. As shown below, each LSA function code also implies a
! specific setting for the U, S1, and S2 bits.
LSA function code LS Type Description
***************
*** 4213,4219 ****
3 0x2003 Inter-Area-Prefix-LSA
4 0x2004 Inter-Area-Router-LSA
5 0x4005 AS-external-LSA
! 6 0x2006 Group-membership-LSA
7 0x2007 NSSA-LSA
8 0x0008 Link-LSA
9 0x2009 Intra-Area-Prefix-LSA
--- 4214,4220 ----
3 0x2003 Inter-Area-Prefix-LSA
4 0x2004 Inter-Area-Router-LSA
5 0x4005 AS-external-LSA
! 6 0x2006 Deprecated (May be reused)
7 0x2007 NSSA-LSA
8 0x0008 Link-LSA
9 0x2009 Intra-Area-Prefix-LSA
***************
*** 4272,4278 ****
+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
+-+-+
| LS Checksum |
Length |
+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
+-+-+
! | 0 |Nt|W|V|E|B|
Options |
+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
+-+-+
| Type | 0 |
Metric |
+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
+-+-+
--- 4272,4278 ----
+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
+-+-+
| LS Checksum |
Length |
+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
+-+-+
! | 0 |Nt|x|V|E|B|
Options |
+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
+-+-+
| Type | 0 |
Metric |
+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
+-+-+
***************
*** 4326,4336 ****
Bit B
When set, the router is an area border router (B is for
border).
! Bit W
! When set, the router is a wild-card multicast receiver. When
! running MOSPF, these routers receive all multicast datagrams,
! regardless of destination. See Sections 3, 4, and A.2 of
[MOSPF]
! for details.
Bit Nt
When set, the router is an NSSA border router that is
--- 4326,4335 ----
Bit B
When set, the router is an area border router (B is for
border).
! Bit x
! This bit was previously used by MOSPF (see [MOSPF]) which has
been
! deprecated for OSPFv3. It should be set to 0 and ignored upon
! reception. It may be reused in the future.
Bit Nt
When set, the router is an NSSA border router that is
***************
*** 5796,5806 ****
--- 5796,5814 ----
o Add new prefix options and options field bits added in this
document to the IANA considerations. Refer to Section 5.
+ E.18. Changes from the 16 Version to the 17 Version
+ The section contains list of changes from version 16 to version 17:
+ o Changes to deprecate MOSPF for OSPFv3. Refer to Appendix A.2,
+ Appendix A.4.2.1, and Appendix A.4.3.
+ o Deprecate the MC-bit in the prefix options which was never
+ adequated specified. Refer to Appendix A.4.1.1.
+ o Clarify the setting of the options in the network-LSA. Refer to
+ Appendix A.4.4.
Acee-iMac:~/ietf/xml2rfc acee$
_______________________________________________
OSPF mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/ospf
