FYI, I've just reinstalled the agent and still giving me the same problem.
On Feb 17, 10:48 am, OSSEC <[email protected]> wrote: > thanks all. > > Yeah i really want to find out what is going on, since i dont want to > take the risk of just ignore it. > > This a Red Hat 5.X > > [root@BAI-MW2 bin]# uname -a > Linux 2.6.18-194.17.4.el5 #1 SMP Wed Oct 20 13:03:08 EDT 2010 x86_64 > x86_64 x86_64 GNU/Linux > > That said im going to keep looking .. although i'm running out of > ideas of where to look. If you have any ideas on how to troubleshoot > more deeply please advice. > > Thanks again. > > On Feb 16, 6:00 pm, "Castle, Shane" <[email protected]> wrote: > > > > > > > > > I must say I have to agree with the research suggestion. One of my systems > > had a failed opcode message that I probably would not have seen (or noted > > the frequency) had it not been for the OSSEC install; turned out there was > > an incorrect BIOS setting behind that. > > > This tendency of programs and syslog messages not to include a program > > source identification is still with us, it seems. And, just saying that > > it's "Linux" is not really enough info: Which distro? Release? Is it up to > > date? > > > -- > > Shane Castle > > Data Security Mgr, Boulder County IT > > CISSP GSEC GCIH > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] On > > Behalf Of Jeremy Lee > > Sent: Wednesday, February 16, 2011 15:48 > > To: [email protected] > > Subject: Re: [ossec-list] Re: alert level 2 error > > > Hmm... I'm not sure what that's from then. > > > If you want to ignore, you can simply add a rule to local_rules.xml. > > Something like this: > > > <rule id="400001" level="0"> > > <match>error initializing: -1</match> > > <description>Ignore "error initializing: -1" messages</description> > > </rule> > > > The risk is that this rule will ignore anything matching that "error > > initializing: -1" keyword. > > > I would still try to find out where that error is coming from though, just > > for the sake of due diligence. > > > On Wed, Feb 16, 2011 at 1:59 PM, OSSEC <[email protected]> wrote: > > > ok, i saw messages in other servers like this > > > Feb 16 07:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 08:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 09:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 10:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 11:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 12:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 13:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 14:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 15:52:42 bai2-ibm-db1 : error initializing: -1 > > Feb 16 16:52:42 bai2-ibm-db1 : error initializing: -1 > > > exactly every hour. So the DHCP looks irrelevant to the errors. > > > It could be an IBM thing? but why just starting happening now? > > > if i want to ignore it ... it will be a risk involved? if so how i > > can > > ignore the alert > > > On Feb 16, 4:28 pm, Jeremy Lee <[email protected]> wrote: > > > Looks like it's an issue with DHCP. Did you try Google to look > > for help on > > > why DHCP might be acting up? Do you have multiple ethernet > > adapters on this > > > server? > > > > If you're certain these errors aren't symptoms of a larger > > problem, you > > > could always setup a rule to ignore them. > > > > On Wed, Feb 16, 2011 at 1:18 PM, OSSEC <[email protected]> > > wrote: > > > > Here is in another server > > > > > Feb 16 15:31:43 BAI-MW1 dhclient: bound to 169.254.95.120 -- > > renewal > > > > in 301 seconds. > > > > Feb 16 15:35:43 BAI-MW1 : error initializing: -1 > > > > Feb 16 15:36:44 BAI-MW1 dhclient: DHCPREQUEST on usb0 to > > > > 169.254.95.118 port 67 > > > > Feb 16 15:36:44 BAI-MW1 dhclient: DHCPACK from 169.254.95.118 > > > > > These servers are used for weblogic > > > > > On the other two servers the date is wrong ... will fix that > > soon, > > > > but im not sure if that was causing the issue. (these are test > > > > servers) > > > > > On Feb 16, 3:58 pm, "dan (ddp)" <[email protected]> wrote: > > > > > Look at the proceeding lines, maybe there is a clue there. > > What's the > > > > > purpose of this system? > > > > > > On Wed, Feb 16, 2011 at 3:36 PM, OSSEC > > <[email protected]> wrote: > > > > > > Im using linux > > > > > > > Here is what i found in /var/log/messages > > > > > > > Feb 16 15:15:33 BAI-DB2 : error initializing: -1 > > > > > > > tons of those lines > > > > > > > On Feb 16, 3:20 pm, Jeremy Lee <[email protected]> wrote: > > > > > >> If in Windows just open the log with Notepad, Wordpad, etc > > and run a > > > > "Find" > > > > > > >> You should be able to identify the log source that this > > came from, as > > > > Dan > > > > > >> has pointed out. > > > > > > >> Let us know. > > > > > > >> On Wed, Feb 16, 2011 at 12:12 PM, dan (ddp) > > <[email protected]> wrote: > > > > > >> > As can be seen here: > > > > > >> >http://www.ossec.net/wiki/Know_How:Email_Alerts_below_7 > > > > > >> > the name of the logfile is generally in the alert > > ("Received From: > > > > > >> > (foo) 192.168.0.2->/var/log/messages"). > > > > > >> > If it isn't in your alert message, you can use grep if > > you're on a > > > > > >> > sane(r) system. I'm not sure how to find it with Windows. > > > > > > >> > On Wed, Feb 16, 2011 at 3:06 PM, OSSEC > > <[email protected]> > > > > wrote: > > > > > >> > > Hey Dan, > > > > > > >> > > bai-mw1 is the name of the agent. How i can find out > > the log that > > > > > >> > > message is hidden? > > > > > > >> > > thanks > > > > > > >> > > On Feb 16, 2:50 pm, "dan (ddp)" <[email protected]> > > wrote: > > > > > >> > >> Hi Chris, > > > > > >> > >> Find out what BAI-MW1 is. Knowing which log that > > message is > > > > hidden in > > > > > >> > >> might be useful. > > > > > >> > >> Then write a rule for the log message. > > > > > > >> > >> On Wed, Feb 16, 2011 at 2:46 PM, OSSEC > > <[email protected] > > > > > > >> > wrote: > > > > > >> > >> > Greetings, > > > > > > >> > >> > all of the sudden i've started receiving the > > following error > > > > message > > > > > > >> > >> > "Unknown problem somewhere in the system." > > > > > >> > >> > Portion of the log(s): > > > > > > >> > >> > Feb 16 14:35:43 BAI-MW1 : error initializing: -1 > > > > > > >> > >> > I;ve restarted the agents and servers but i still > > having the > > > > same > > > > > >> > >> > issue. These alerts are coming out of few agents > > not all of > > > > them. > > > > > > >> > >> > ANy ideas please? > > > > > > >> > >> > thanks
