Hi, Compiling your code gives me the same error but I dont have any solution for now. Maybe someone in the list will have some information.
On Wed, May 7, 2014 at 9:32 AM, Bruno Belarte <[email protected]>wrote: > I forgot to mention: I'm on ubuntu 12.04, with OTB 4.0, gdal 1.10 > > Le mercredi 7 mai 2014 09:19:26 UTC+2, Bruno Belarte a écrit : > >> Hi, >> >> Here is a minimal code that reproduce the error. >> >> The exact commands I typed for my testings are following: >> otbcli_ExtractROI -in 20120814_ZE_FUS_sudest_24bitscolor.img -out >> crop_0_0.tif -startx 0 -starty 0 -sizex 1701 -sizey 1782 >> otbcli_Rasterization -in MR_160sh5.shp -out test2.tif -im crop_0_0.tif >> -mode attribute -mode.attribute.field "ID" >> >> Where 20120814_ZE_FUS_sudest_24bitscolor.img is a Pleiades image >> and MR_160sh5.shp is one of the two shapefiles. Both shapefiles and the >> image were produced by colleagues, I can ask them about how they did the >> segmentations. >> >> I also tried to do the same processes with ogr/gdal, the commands are: >> ogr2ogr -clipsrc 1050016 6847483 1050116 6847583 extract.shp >> sertit_classification_2012_ZoneSE.shp >> gdal_rasterize -a ID -te 1050016 6847483 1050116 6847583 -ts 200 200 -ot >> Uint32 sertit_classification_2012_ZoneSE.shp crop.tif >> Coordinates are given in the same projection as the input image, and the >> results are consistent in both Monteverdi and QGIS. >> >> Le mardi 6 mai 2014 20:29:43 UTC+2, Rashad a écrit : >>> >>> >>> >>> >>> On Tue, May 6, 2014 at 3:03 AM, Bruno Belarte <[email protected]>wrote: >>> >>>> Hi, >>>> >>>> Here is a short extract of one of the shapefiles. I tested it again >>>> with my code and it still failed with the error itk::ERROR: >>>> LabelObjectToPolygonFunctor(0x7fff1701bc00): End point not with +/-1 >>>> line from line >>>> >>>> I am not able to reproduce this error. Could you post a more complete >>> code.? >>> and the exact command line you used for: >>> rasterization >>> segmentaion >>> >>> >>>> Le vendredi 2 mai 2014 19:12:01 UTC+2, Rashad a écrit : >>>>> >>>>> >>>>> Hi, >>>>> >>>>> On Fri, May 2, 2014 at 8:51 AM, Bruno Belarte <[email protected]>wrote: >>>>> >>>>>> Hi everyone, >>>>>> >>>>>> I have a piece of code that behaves differently with differents >>>>>> segmentations. The problematic piece of code can be found here: >>>>>> http://pastebin.com/Gfa9TdPb >>>>>> >>>>>> Segmentation 1: LabelImage generated with the large scale meanshift >>>>>> framework from a Pleiades image (pan-ms fusion) >>>>>> Segmentation 2 and 3: two LabelImage generated with the >>>>>> otbcli_Rasterization application from two different shapefiles >>>>>> >>>>>> >>>>> Is it possible for you to provide your data to test?. shapefiles would >>>>> be fine. >>>>> >>>>> >>>>>> With segmentation 1 everything works fine: the LabelMap and the >>>>>> corresponding polygons are computed and can be used further in the code. >>>>>> With segmentation 2 and 3 the code failed at line 19 with the >>>>>> following error: >>>>>> /home/belarte/OTB/src/OTB/Utilities/ITK/Modules/Core/Common/ >>>>>> src/itkMultiThreader.cxx:359: >>>>>> itk::ERROR: MultiThreader(0x1cdcf90): Exception occurred during >>>>>> SingleMethodExecute >>>>>> /home/belarte/OTB/src/OTB/Code/OBIA/otbLabelObjectToPolygonFunctor >>>>>> .txx:559: >>>>>> itk::ERROR: LabelObjectToPolygonFunctor(0x7fff1701bc00): End point >>>>>> not with +/-1 line from line >>>>>> >>>>>> The program crashes while computing the polygons from the LabelImage. >>>>>> My guess was that some of the polygons in the shapefile were problematic, >>>>>> so I tried to simplify the polygons with the ogr2ogr application with >>>>>> different *simplify* parameters (0.001 0.01 0.1 0.5 and 0.75) and >>>>>> then use the rasterization application but it did not change the result. >>>>>> I >>>>>> also try to use the otbcli_LSMSSmallRegionsMerging with different >>>>>> mininmum >>>>>> region sizes (10 15 20 100 and 1000) after the rasterization, but again >>>>>> no >>>>>> changes. >>>>>> >>>>>> Does someone have an idea of what could be the problem here? >>>>>> >>>>>> Thanks for your help, >>>>>> >>>>>> Bruno >>>>>> >>>>>> -- >>>>>> -- >>>>>> Check the OTB FAQ at >>>>>> http://www.orfeo-toolbox.org/FAQ.html >>>>>> >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "otb-users" group. >>>>>> To post to this group, send email to [email protected] >>>>>> >>>>>> To unsubscribe from this group, send email to >>>>>> [email protected] >>>>>> >>>>>> For more options, visit this group at >>>>>> http://groups.google.com/group/otb-users?hl=en >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "otb-users" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Regards, >>>>> Rashad >>>>> >>>> -- >>>> -- >>>> Check the OTB FAQ at >>>> http://www.orfeo-toolbox.org/FAQ.html >>>> >>>> You received this message because you are subscribed to the Google >>>> Groups "otb-users" group. >>>> To post to this group, send email to [email protected] >>>> To unsubscribe from this group, send email to >>>> [email protected] >>>> For more options, visit this group at >>>> http://groups.google.com/group/otb-users?hl=en >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "otb-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> Regards, >>> Rashad >>> >> -- > -- > Check the OTB FAQ at > http://www.orfeo-toolbox.org/FAQ.html > > You received this message because you are subscribed to the Google > Groups "otb-users" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/otb-users?hl=en > --- > You received this message because you are subscribed to the Google Groups > "otb-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Regards, Rashad -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
