Hi Emre, normally .geom file should contain sensor model info to allow to perform geometric or radiometric operations on ExtractRoi output. I am not sure to understand but If you have an orthor-ready product you /*must*/ use skipcarto option to allow to save metadata info in the geom file.
Regards, Manuem Le 07/09/2014 11:59, emre a écrit : > Hi, > When I use ExtractRoi (either via code or via applications) it crops > the image properly but the resultant file has a geom file exactly same > as the original one. This is causing operations like sensor to ground, > ground to sensor operations to fail. I have an ortho-ready image and I > didnt use skipcarto while using ExtractRoi. Any ideas what might be > wrong? > > All the best > Emre > -- > -- > Check the OTB FAQ at > http://www.orfeo-toolbox.org/FAQ.html > > You received this message because you are subscribed to the Google > Groups "otb-users" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/otb-users?hl=en > --- > You received this message because you are subscribed to the Google > Groups "otb-users" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout. -- Manuel GRIZONNET CNES - DCT/SI/AP - BPI 1219 18, avenue Edouard Belin 31401 Toulouse Cedex 09 - France Tel: +33 561 282 630 - Fax: +33 561 283 109 -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
