With that tip in mind, I did get one step in the right direction. Steps: Used otbcli_orthorectification NTF to create TIF (readImageInfo did not recognize sensor or RPC no matter how I renamed/revised the metadata files until converted to TIF) Extracting the RPB/IMD file from NTF tar to the main directory and renamed to match TIF. Extracted the TIL file from the NTF tar to the main directory, renamed to match TIF, and revised filename parameter within to match TIF. Obcli_ReadImageInfo on the TIF's TIL shows the RpcModel as ossimQuickbirdMetaData, while the same command on the NITF's TIL shows the RpcModel as ossimRpcModel.
Its not 100% yet, since the sensor type isn't recognized yet in otbcli_opticalcalibration, but at least ossim knows the model type. Testing continues.... On Thu, Feb 19, 2015 at 3:21 PM, Eric Wenger <[email protected]> wrote: > Doug, > > One issue I have had with these images is case-sensitivity in the > filename. OTB looks in the metadata files -- IMD maybe -- and finds the > NTF filename in ALL CAPS. If it isn't all caps on your filesystem with > exactly the name in the IMD/RPC/TIL etc. files, ossim won't detect the > sensor. > > --Eric > > On Thu, Feb 19, 2015 at 8:30 AM, Doug Creel <[email protected]> wrote: > >> Dear All- >> I have been following the cookbook process for preparing raw NTFs >> of Worldview 2 and QuickBird2 but have run into a problem. >> http://otbcb.readthedocs.org/en/latest/recipes/optpreproc.html >> >> C:\>otbcli_OpticalCalibration -in C:\test\QB\TestQB02-M1BS.NTF -out >> C:\test\QB02-M1BS.tif -level toc >> 2015 Feb 19 08:26:04 : Application.logger (INFO) >> File: C:\test\QB02-M1BS.NTF >> Sensor unknown! >> Additional parameters are necessary, please provide them (cf. >> documentation)! >> ERROR: Missing mandatory parameter: acqui.gainbias 0 >> ERROR: Troubles loading parameter, please check your line argument... >> >> Ossim does not recognize the sensor type and will not allow >> OpticalCalibration or assign the correct RPC for Orthorectification. >> I have checked otbcli_ReadImageInfo and the sensor type is blank with the >> generic type. >> >> numberbands: 4 >> sensor: >> id: >> time: >> type: ossimRpcModel. >> >> However, using GDALINFO, the sensor type is recognized: >> >> NITF_ISORCE=QB02 >> NITF_PIAIMC_SENSNAME=QB02 >> NITF_STDIDC_MISSION=QB02 >> >> The images are NTF with the tar file containing the IMD, TIL, and the >> rest of the metadata. I have also extracted the IMD and TIL to the same >> folder as the NTF and renamed to match but the sensor type still isn't >> read. >> >> I'm hoping this is an easy fix on my end since its happening with all of >> my NTFs. >> >> Thanks everyone- >> >> -- >> -- >> Check the OTB FAQ at >> http://www.orfeo-toolbox.org/FAQ.html >> >> You received this message because you are subscribed to the Google >> Groups "otb-users" group. >> To post to this group, send email to [email protected] >> To unsubscribe from this group, send email to >> [email protected] >> For more options, visit this group at >> http://groups.google.com/group/otb-users?hl=en >> --- >> You received this message because you are subscribed to the Google Groups >> "otb-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > -- > Check the OTB FAQ at > http://www.orfeo-toolbox.org/FAQ.html > > You received this message because you are subscribed to the Google > Groups "otb-users" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/otb-users?hl=en > --- > You received this message because you are subscribed to a topic in the > Google Groups "otb-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/otb-users/jURdeyMYVIc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
