I'm not sure this helps your problem exactly Scoh, but I was getting the same 4-line error message you cite above while trying to use my own otbcli_* tools installed under OSGeo4W. I abandoned that and installed OTB on it's own elsewhere on my hard drive, and I have no such problems using those otbcli_* or otbgui_* tools now. Cheers, P
On Monday, July 20, 2015 at 10:38:50 PM UTC-4, Scoh wrote: > > Below is what I tried. > > cmd.exe and typed > > otbcli_StereoFramework.bat -input.il > C:\Temp\Examples\sensor_stereo_left.tif > C:\Temp\Examples\sensor_stereo_right.tif -elev.default 140 > -stereorect.fwdgridstep 8 -stereorect.invgridssrate 4 -postproc.med 1 > -output.res 2.5 -output.out C:\Temp\Examples\dem.tif > > and got a message saying > 'otbApplicationLauncherCommandLine.exe' is not recognized as an internal > or external command, operable program or batch file. > > This is why I previously said I couldn't open the bat files in the build. > > You told me it works, so I added ";C:\OSGeo4W\bin(where > otbApplicationlaunchercommandline.exe exists)" without doubt to system path > and tried again > > otbcli_StereoFramework.bat -input.il > C:\Temp\Examples\sensor_stereo_left.tif > C:\Temp\Examples\sensor_stereo_right.tif -elev.default 140 > -stereorect.fwdgridstep 8 -stereorect.invgridssrate 4 -postproc.med 1 > -output.res 2.5 -output.out C:\Temp\Examples\dem.tif > > and what comes out is another message > > ERROR: Could not find application "StereoFramework" > ERROR: Module search path: none (check ITK_AUTOLOAD_PATH) > ERROR: Available modules : none. > ERROR: No loaded application... > > Now I'm stuck and don't get the problem. Did I miss installing some otb > dependencies? > And please check the link you suggested. it doesn't have otbgui_....bat > files. > > Anyway I appreciate it. > Still I'm learning something. > > On Monday, July 20, 2015 at 11:55:48 PM UTC+9, Rashad wrote: >> >> Hi there, >> >> On Mon, Jul 20, 2015 at 12:10 PM, Scoh <[email protected]> wrote: >> >>> I've tried everything at best as I could with the nightly build, which >>> is full of bat and dll files. >>> >> >> Dont worry about no of bat and dll files. you only need to run >> otbcl_StereoFramework ( from your original post) >> >> For that you need to do the following; >> >> Assuming the zip is extracted to C:\OTB-5.0.0 >> >> open windows command prompt: (cmd.exe) >> >> cd c:\OTB-5.0.0\bin >> >> (and launch otbcli_StereoFramework with the correct arguments) >> >> you can also use otbgui_StereoFramework which can launched simply by >> dblclicking on the bat file - otbgui_StereoFramework.bat >> >> otbcli_StereoFramework -input.il C:\Temp\Examples\sensor_ >> stereo_left.tif C:\Temp\Examples\sensor_stereo_right.tif -elev.default >> 140 -stereorect.fwdgridstep 8 -stereorect.invgridssrate 4 -postproc.med 1 >> -output.res 2.5 -output.out C:\Temp\Examples\dem.tif >> >> >> >> >>> Until now, however, couldn't figure out how to deal with those files, >>> even went back to OTB source and tried to cmake with errors with this >>> <http://wiki.orfeo-toolbox.org/index.php/OTB_%26_Windows_OS>. >>> Now I'm stuck with CMake PATH too long problem >>> <http://www.cmake.org/Bug/bug_relationship_graph.php?bug_id=11931&graph=relation> >>> . >>> So I'd rather like to work with nightly build you suggested. >>> It'd be much appreciated if you tell me what work is exactly needed. >>> >>> >>> >>> On Sunday, July 19, 2015 at 2:23:07 AM UTC+9, Rashad wrote: >>> >>>> >>>> >>>> On Sat, Jul 18, 2015 at 2:51 PM, Scoh <[email protected]> wrote: >>>> >>>>> As a non-developer and end user, I don't want to offend any >>>>> development team, but I understand your answer as being that everyone >>>>> using >>>>> 5.0.0 can't even do the stereo example due to above issue. >>>>> Being not a big fan of git, is there any other solution without using >>>>> it? >>>>> Really amazed for the integrity of OTB, but if no I'll have to >>>>> consider other open source too. >>>>> >>>>> If you dont want to rebuild from git master we can understand that >>>> given that you are end user. For that we have daily built packages here - >>>> https://www.orfeo-toolbox.org/packages/nightly/latest/ >>>> >>>> In my opinion, that will be the other option you were looking for. The >>>> packages are available for 3 platforms. Windows (.Win*.zip /exe), Linux >>>> (.run) and Mac (.dmg). >>>> >>>> As you are using windows, try >>>> https://www.orfeo-toolbox.org/packages/nightly/latest/OTB-5.0.0-win64.zip >>>> if you are using 64bit machine. >>>> >>>> >>>> >>>> >>>> >>>>> On Saturday, July 18, 2015 at 12:06:35 AM UTC+9, Rashad wrote: >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Jul 17, 2015 at 5:02 PM, Scoh <[email protected]> wrote: >>>>>> >>>>>>> I'm using stereoframework with example stadium photo and I got a >>>>>>> message saying "unexpected token "if" found at...." >>>>>>> After getting the message, I searched the internet to fix it, found >>>>>>> out that was quite an issue before (this >>>>>>> <https://bugs.orfeo-toolbox.org/print_bug_page.php?bug_id=850> or >>>>>>> this <https://groups.google.com/forum/#!topic/otb-users/_mZLeJ_SE34>) >>>>>>> when OTB version was 4.2.0 or some. >>>>>>> However, I haven't found out the exact solution I can give it a go, >>>>>>> so the question is >>>>>>> >>>>>>> 1. Wasn't the problem already solved back then? OTB 4.0.0 release >>>>>>> note says "apTvDmStereoFramework fails with muParser 2.2" and seems to >>>>>>> have dealt with the problem. >>>>>>> >>>>>> >>>>>> The issue is fixed in the git master. But unfortunately not available >>>>>> in OTB 5.0.0 >>>>>> >>>>>>> >>>>>>> 2. If it is a ongoing problem, which file should I fix and how? For >>>>>>> now I haven't used my own code but only otbcli_stereoframework like >>>>>>> below >>>>>>> >>>>>>> otbcli_StereoFramework -input.il >>>>>>> C:\Temp\Examples\sensor_stereo_left.tif >>>>>>> C:\Temp\Examples\sensor_stereo_right.tif -elev.default 140 >>>>>>> -stereorect.fwdgridstep 8 -stereorect.invgridssrate 4 -postproc.med 1 >>>>>>> -output.res 2.5 -output.out C:\Temp\Examples\dem.tif >>>>>>> >>>>>>> >>>>>>> and error message is >>>>>>> >>>>>>> Writing C:\Temp\Examples\dem.tif...: 0% [ ]2015 Jul 17 >>>>>>> 22:40:02 : Application.logger (FATAL) The following error occurred >>>>>>> during application execution : >>>>>>> C:\OSGeo4W64\usr\src\osgeo4w\itk\itk-4.7.2\Modules\Core\Common\src\itkMultiThreader.cxx:416: >>>>>>> itk::ERROR: MultiThreader(00000000034288C0): Exception occurred >>>>>>> during SingleMethodExecute >>>>>>> c:\users\jmalik\dashboard\src\otb-5.0.0\modules\filtering\mathparser\include\otbBandMathImageFilter.txx:300: >>>>>>> itk::ERROR: BandMathImageFilter(0000000003A02CD0): >>>>>>> itk::ExceptionObject (00000000001786A0) >>>>>>> Location: "unknown" >>>>>>> File: >>>>>>> C:\Users\jmalik\Dashboard\src\OTB-5.0.0\Modules\Filtering\MathParser\src\otbParser.cxx >>>>>>> Line: 166 >>>>>>> Description: itk::ERROR: ParserImpl(0000000003AFE530): >>>>>>> Message: Unexpected token "if" found at position 0. >>>>>>> Formula: if((inleft > 0) and variance > 50,255,0) >>>>>>> Token: if >>>>>>> Position: 0 >>>>>>> >>>>>>> >>>>>>> I wish I found otbBandMathImageFilter.txx or otbParser.cxx to >>>>>>> replace "if" to "? :", but seems it's not that easy. >>>>>>> It's already been discussed here a lot, but if someone helps solving >>>>>>> the problem for users like me, it would be much appreciated. >>>>>>> >>>>>>> -- >>>>>>> -- >>>>>>> Check the OTB FAQ at >>>>>>> http://www.orfeo-toolbox.org/FAQ.html >>>>>>> >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "otb-users" group. >>>>>>> To post to this group, send email to [email protected] >>>>>>> To unsubscribe from this group, send email to >>>>>>> [email protected] >>>>>>> For more options, visit this group at >>>>>>> http://groups.google.com/group/otb-users?hl=en >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "otb-users" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Regards, >>>>>> Rashad >>>>>> >>>>> -- >>>>> -- >>>>> Check the OTB FAQ at >>>>> http://www.orfeo-toolbox.org/FAQ.html >>>>> >>>>> You received this message because you are subscribed to the Google >>>>> Groups "otb-users" group. >>>>> To post to this group, send email to [email protected] >>>>> To unsubscribe from this group, send email to >>>>> [email protected] >>>>> For more options, visit this group at >>>>> http://groups.google.com/group/otb-users?hl=en >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "otb-users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> >>>> >>>> -- >>>> Regards, >>>> Rashad >>>> >>> -- >>> -- >>> Check the OTB FAQ at >>> http://www.orfeo-toolbox.org/FAQ.html >>> >>> You received this message because you are subscribed to the Google >>> Groups "otb-users" group. >>> To post to this group, send email to [email protected] >>> To unsubscribe from this group, send email to >>> [email protected] >>> For more options, visit this group at >>> http://groups.google.com/group/otb-users?hl=en >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "otb-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Regards, >> Rashad >> > -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
