Hi,I'm getting a strange error when trying to run the optical calibration from the command line. The error is below but I'm not sure why it's happening. The image type is correctly identified but it complains about image dimensions?!? I also included the read image output (even further below) which doesn't seem to produce any problems. Any ideas how to get around this would be greatly appreciated. Have a great day,Conrad
2016 Mar 28 17:14:15 : Application.logger (INFO) File: IMG_PHR1A_MS_201506251042185_ORT_1571237101-002_R1C1.JP2 Sensor detected: PHR 1A Parameters extract from input image: Acquisition Day: 25 Acquisition Month: 6 Acquisition Year: 2015 Acquisition Sun Elevation Angle: 66.2186 Acquisition Sun Azimuth Angle: 143.106 Acquisition Viewing Elevation Angle: 70.748 Acquisition Viewing Azimuth Angle: 187.007 Acquisition gain (per band): 10.46 9.34 9.38 15.69 Acquisition bias (per band): 0 0 0 0 Solar Irradiance (per band): 1594 1830 1915 1060 2016 Mar 28 17:14:15 : Application.logger (INFO) Compute Top of Atmosphere reflectance 2016 Mar 28 17:14:15 : Application.logger (INFO) Clamp values between [0, 100] 2016 Mar 28 17:14:15 : Application.logger (FATAL) The following error occurred during application execution : /home/ec2-user/DEV/tools/OTB-5.2/install/include/ITK-4.8/itkImageToImageFilter.hxx:248: itk::ERROR: ImageToLuminanceImageFilter(0x24dcab0): Inputs do not occupy the same physical space! InputImage Origin: [2.3093590e+06, 3.8940790e+06], InputImagePrimary Origin: [2.3093590e+06, 3.8940790e+06] Tolerance: -2.0000000e-06 InputImage Spacing: [-2.0000000e+00, 2.0000000e+00], InputImagePrimary Spacing: [-2.0000000e+00, 2.0000000e+00] Tolerance: -2.0000000e-06 Read Image Info2016 Mar 28 17:19:59 : Application.logger (INFO) Image general information: Number of bands : 4 No data flags : Not found Start index : [0,0] Size : [11246,12240] Origin : [2.30936e+06,3.89408e+06] Spacing : [-2,2] Estimated ground spacing (in meters): [3343.75,663.273] Image acquisition information: Sensor : PHR 1A Image identification number: Image projection : PROJCS["ETRS89 / LAEA Europe", GEOGCS["ETRS89", DATUM["European_Terrestrial_Reference_System_1989", SPHEROID["GRS 1980",6378137,298.257222101, AUTHORITY["EPSG","7019"]], TOWGS84[0,0,0,0,0,0,0], AUTHORITY["EPSG","6258"]], PRIMEM["Greenwich",0, AUTHORITY["EPSG","8901"]], UNIT["degree",0.0174532925199433, AUTHORITY["EPSG","9122"]], AXIS["Latitude",NORTH], AXIS["Longitude",EAST], AUTHORITY["EPSG","4258"]], PROJECTION["Lambert_Azimuthal_Equal_Area"], PARAMETER["latitude_of_center",52], PARAMETER["longitude_of_center",10], PARAMETER["false_easting",4321000], PARAMETER["false_northing",3210000], UNIT["metre",1, AUTHORITY["EPSG","9001"]], AXIS["Y",NORTH], AXIS["X",EAST], AUTHORITY["EPSG","3035"]] Acquisition time : 2015-06-25T10:42:00 Image default RGB composition: [R, G, B] = [0,1,2] Ground control points information: Number of GCPs = 0 GCPs projection = Output parameters value: indexx: 0 indexy: 0 sizex: 11246 sizey: 12240 spacingx: -2 spacingy: 2 originx: 2309359 originy: 3894079 estimatedgroundspacingx: 3343.753174 estimatedgroundspacingy: 663.2727661 numberbands: 4 sensor: PHR 1A -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
