Sure...
Upper left tile image in:
otbcli_ReadImageInfo -in crise/PROD_SPOT6_001/VOL_SPOT6_001_A/
IMG_SPOT6_PMS_001_A/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.JP2
2016 Aug 23 11:41:10 : Application.logger (INFO)
Image general information:
Number of bands : 4
No data flags : Not found
Start index : [0,0]
Size : [12288,14336]
Origin : [0.5,0.5]
Spacing : [1,1]
Estimated ground spacing (in meters): [1.77451,1.76453]
Image acquisition information:
Sensor : SPOT 6
Image identification number: 1285949101
Acquisition time : 2015-05-02T04:47:00
Country : Nepal
Town : Lidiṅ
Image footprint coordinates:
Upper left corner (latitude, longitude) = [28.3104,84.6953]
Upper right corner (latitude, longitude) = [28.2831,85.0394]
Lower left corner (latitude, longitude) = [28.0326,84.6948]
Lower right corner (latitude, longitude) = [28.0037,85.0405]
Image default RGB composition:
[R, G, B] = [0,1,2]
Ground control points information:
Number of GCPs = 0
GCPs projection =
Output parameters value:
indexx: 0
indexy: 0
sizex: 12288
sizey: 14336
spacingx: 1
spacingy: 1
originx: 0.5
originy: 0.5
estimatedgroundspacingx: 1.774505496
estimatedgroundspacingy: 1.76453495
numberbands: 4
sensor: SPOT 6
id: 1285949101
time: 2015-05-02T04:47:00
ullat: 28.31040001
ullon: 84.69526672
urlat: 28.28313637
urlon: 85.03935242
lrlat: 28.0037384
lrlon: 85.04052734
lllat: 28.03257179
lllon: 84.69483185
town: Lidiṅ
country: Nepal
rgb.r: 0
rgb.g: 1
rgb.b: 2
projectionref:
keyword:
gcp.count: 0
gcp.proj:
gcp.ids:
gcp.info:
gcp.imcoord:
gcp.geocoord:
upper left tile orthorectification log:
otbcli_OrthoRectification -io.in
"crise/PROD_SPOT6_001/VOL_SPOT6_001_A/IMG_SPOT6_PMS_001_A/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.JP2"
-io.out
"crise/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1_ortho.tif?&gdal:co:TILED=YES"
uint16 -map utm -map.utm.zone 45 -outputs.spacingx 2 -outputs.spacingy -2 -
outputs.mode autosize -elev.dem SRTM30 -opt.ram 1000
2016 Aug 23 11:32:04 : Application.logger (INFO) Elevation management:
setting default height above ellipsoid to 0 meters
2016 Aug 23 11:32:04 : Application.logger (INFO) Elevation management:
using DEM directory (SRTM30)
2016 Aug 23 11:32:04 : Application.logger (INFO) Generating output with
size = [11061, 13789]
2016 Aug 23 11:32:04 : Application.logger (INFO) Generating output with
pixel spacing = [2, -2]
2016 Aug 23 11:32:04 : Application.logger (INFO) Generating output with
origin = [273642, 3.13359e+06]
2016 Aug 23 11:32:04 : Application.logger (INFO) Area outside input
image bounds will have a pixel value of [0, 0, 0, 0]
2016 Aug 23 11:32:04 : Application.logger (INFO) Using a deformation
grid with a physical spacing of 4
2016 Aug 23 11:32:04 : Application.logger (INFO) Using a deformation
grid of size [5530, 6894]
ossimImageElevationDatabase::createCell WARN:
Could not open: /home/stumpf/Data/Nepal/SRTM30/egm96.grd
Removing file from map!
Writing crise/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1_ortho.tif?&
gdal:co:TILED=YES...: 100%
[**************************************************] (2e+02 seconds)
mosaiced image info:
otbcli_ReadImageInfo -in crise/PROD_SPOT6_001/VOL_SPOT6_001_A/
IMG_SPOT6_PMS_001_A/IMG_SPOT6_PMS_201505020447120_SEN_1285949101.tif
2016 Aug 23 11:44:35 : Application.logger (INFO)
Image general information:
Number of bands : 4
No data flags : Not found
Start index : [0,0]
Size : [19081,17533]
Origin : [1,-1]
Spacing : [1,-1]
Estimated ground spacing (in meters): [1.76262,1.76281]
Image acquisition information:
Sensor : NULL
Image identification number: NULL
Country : Nepal
Town : Lidiṅ
Image footprint coordinates:
Upper left corner (latitude, longitude) = [28.3104,84.6953]
Upper right corner (latitude, longitude) = [28.2831,85.0394]
Lower left corner (latitude, longitude) = [28.0326,84.6948]
Lower right corner (latitude, longitude) = [28.0037,85.0405]
Image default RGB composition:
[R, G, B] = [0,1,2]
Ground control points information:
Number of GCPs = 0
GCPs projection =
Output parameters value:
indexx: 0
indexy: 0
sizex: 19081
sizey: 17533
spacingx: 1
spacingy: -1
originx: 1
originy: -1
estimatedgroundspacingx: 1.762622833
estimatedgroundspacingy: 1.762808681
numberbands: 4
sensor: NULL
id: NULL
time:
ullat: 28.31039238
ullon: 84.69527435
urlat: 28.28312683
urlon: 85.03936005
lrlat: 28.00373077
lrlon: 85.0405426
lllat: 28.03256226
lllon: 84.69484711
town: Lidiṅ
country: Nepal
rgb.r: 0
rgb.g: 1
rgb.b: 2
projectionref:
keyword:
gcp.count: 0
gcp.proj:
gcp.ids:
gcp.info:
gcp.imcoord:
gcp.geocoord:
and the log ofthe mosiac orthorectification:
otbcli_OrthoRectification -io.in
"crise/PROD_SPOT6_001/VOL_SPOT6_001_A/IMG_SPOT6_PMS_001_A/IMG_SPOT6_PMS_201505020447120_SEN_1285949101.tif?&skipcarto=true"
-io.out
"crise/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_ortho.tif?&gdal:co:TILED=YES"
uint16 -map utm -map.utm.zone 45 -outputs.spacingx 2 -outputs.spacingy -2 -
outputs.mode autosize -elev.dem SRTM30 -opt.ram 1000
2016 Aug 23 11:49:19 : Application.logger (INFO) Elevation management:
setting default height above ellipsoid to 0 meters
2016 Aug 23 11:49:19 : Application.logger (INFO) Elevation management:
using DEM directory (SRTM30)
2016 Aug 23 11:49:19 : Application.logger (INFO) Generating output with
size = [17174, 17294]
2016 Aug 23 11:49:19 : Application.logger (INFO) Generating output with
pixel spacing = [2, -2]
2016 Aug 23 11:49:19 : Application.logger (INFO) Generating output with
origin = [273534, 3.13358e+06]
2016 Aug 23 11:49:19 : Application.logger (INFO) Area outside input
image bounds will have a pixel value of [0, 0, 0, 0]
2016 Aug 23 11:49:19 : Application.logger (INFO) Using a deformation
grid with a physical spacing of 4
2016 Aug 23 11:49:19 : Application.logger (INFO) Using a deformation
grid of size [8587, 8647]
ossimImageElevationDatabase::createCell WARN:
Could not open: /home/stumpf/Data/Nepal/SRTM30/egm96.grd
Removing file from map!
Writing crise/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_ortho.tif?&gdal:
co:TILED=YES...: 100% [**************************************************] (
4e+02 seconds)
This is OTB 5.4 on Ubuntu 16.04. Thanks for having a look and let me know
if further infos are needed.
Cheers,
André
On Tuesday, August 23, 2016 at 9:44:32 AM UTC+2, Julien Michel wrote:
>
> Hi, can you post the logs of the upper left tile for case 1 and also the
> complete logs for case 2 ?
>
> A ReadImageInfo on both would also be helpful.
>
> Thanks,
>
> Julien
>
> Le 19/08/2016 à 15:18, André Stumpf a écrit :
> > ...just realized that the GIF doesn't seem to work after the upload,
> > so here two PNGs attached.
> >
> > On Friday, August 19, 2016 at 3:13:17 PM UTC+2, André Stumpf wrote:
> >
> > Hello,
> >
> > I noticed a small offset between orthoimges generated from
> > individual tiles and mosaics. Not sure if this is a bug or a
> > feature...
> >
> > I have a SPOT 6 image delivered in four separate tiles:
> > |
> >
> > IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.JP2
> > IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R2C1.JP2
> > IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R2C2.JP2
> > IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C2.JP2
> > |
> >
> > ...and its respective DIMAPV2 file:
> >
> > |
> > DIM_SPOT6_PMS_201505020447120_SEN_1285949101.XML
> > RPC_SPOT6_PMS_201505020447120_SEN_1285949101.XML
> > |
> >
> > One strategy would be an orthorectification of each tile
> indivually...
> >
> > |
> > otbcli_OrthoRectification
> >
> > -io.in"PROD_SPOT6_001/VOL_SPOT6_001_A/IMG_SPOT6_PMS_001_A/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.JP2"-io.out"PROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES"uint16
> >
>
> > -map utm -map.utm.zone 45-outputs.spacingx 2-outputs.spacingy
> > -2-outputs.mode autosize -elev.dem ../SRTM30 -opt.ram 1000
> > 2016Aug1912:44:01:Application.logger
> > (INFO)Elevationmanagement:setting defaultheight above ellipsoid to
> > 0meters
> > 2016Aug1912:44:02:Application.logger
> > (INFO)Elevationmanagement:usingDEM directory (../SRTM30)
> > 2016Aug1912:44:02:Application.logger (INFO)Generatingoutput
> > withsize =[11061,13789]
> > 2016Aug1912:44:02:Application.logger (INFO)Generatingoutput
> > withpixel spacing =[2,-2]
> > 2016Aug1912:44:02:Application.logger (INFO)Generatingoutput
> > withorigin =[273642,3.13359e+06]
> > 2016Aug1912:44:02:Application.logger (INFO)Areaoutside input image
> > bounds will have a pixel value of [0,0,0,0]
> > 2016Aug1912:44:02:Application.logger (INFO)Usinga deformation grid
> > witha physical spacing of 4
> > 2016Aug1912:44:02:Application.logger (INFO)Usinga deformation grid
> > of size [5530,6894]
> >
> WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:0%[WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:2%[*WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:4%[**WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:6%[***WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:8%[****WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:10%[*****WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:12%[******WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:14%[*******WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:16%[********WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:18%[*********WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:20%[**********WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:22%[***********WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:24%[************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:26%[*************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:28%[**************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:30%[***************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:32%[****************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:34%[*****************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:36%[******************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:38%[*******************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:40%[********************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:42%[*********************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:44%[**********************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:46%[***********************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:48%[************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:50%[*************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:52%[**************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:54%[***************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:56%[****************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:58%[*****************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:60%[******************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:62%[*******************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:64%[********************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:66%[*********************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:68%[**********************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:70%[***********************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:72%[************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:74%[*************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:76%[**************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:78%[***************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:80%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:82%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:84%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:86%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:88%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:90%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:92%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:94%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:96%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:98%[****************************************WritingPROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_R1C1.tif?&gdal:co:TILED=YES...:100%[**************************************************](2e+02seconds)
>
>
> >
> >
> > |
> >
> >
> > ...the other (better?) strategy would be to fuse with
> > otbcli_TileFusion:
> > |IMG_SPOT6_PMS_201505020447120_SEN_1285949101.tif|
> > |
> > |...and then orthorectify the mosaic:
> >
> > |
> > otbcli_OrthoRectification
> >
> > -io.in"IMG_SPOT6_PMS_201505020447120_SEN_1285949101.tif"-io.out"PROD_SPOT6_001/IMG_SPOT6_PMS_201505020447120_SEN_1285949101_ortho.tif?&gdal:co:TILED=YES"uint16
> >
>
> > -map utm -map.utm.zone 45-outputs.spacingx 2-outputs.spacingy
> > -2-outputs.mode autosize -elev.dem ../SRTM30 -opt.ram 1000
> > |
> >
> >
> > In their overlap area both orthos have an sytematic offset of
> > about one pixel (see attached GIF). Unfortunately I lack a
> > reference to evaluate which of the orthos is more correct but in
> > any case I guess this should not happen since the input RPCs are
> > the same in both cases?
> >
> > Cheers,
> > André
> >
> >
> >
> >
> >
> >
> > --
> > --
> > Check the OTB FAQ at
> > http://www.orfeo-toolbox.org/FAQ.html
> >
> > You received this message because you are subscribed to the Google
> > Groups "otb-users" group.
> > To post to this group, send email to [email protected]
> <javascript:>
> > To unsubscribe from this group, send email to
> > [email protected] <javascript:>
> > For more options, visit this group at
> > http://groups.google.com/group/otb-users?hl=en
> > ---
> > You received this message because you are subscribed to the Google
> > Groups "otb-users" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> > an email to [email protected] <javascript:>
> > <mailto:[email protected] <javascript:>>.
> > For more options, visit https://groups.google.com/d/optout.
>
>
> --
> Julien MICHEL
> CNES - DCT/SI/AP - BPI 1219
> 18, avenue Edouard Belin
> 31401 Toulouse Cedex 09 - France
> Tel: +33 561 282 894 - Fax: +33 561 283 109
>
>
>
--
--
Check the OTB FAQ at
http://www.orfeo-toolbox.org/FAQ.html
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/otb-users?hl=en
---
You received this message because you are subscribed to the Google Groups
"otb-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
