Actually in this case if you take the geom file from the R1C1 tile it
should be ok.
Regards,
Julien
Le 29/06/2017 à 14:11, Ofer Zilberstein a écrit :
addition -
One can merge the split images into one image using for example
otbcli_TileFusion. However, this function does not take care for
creating a unified geom file - if so, how you maintain the sensor
information which is located in the XML?
On Wednesday, June 28, 2017 at 11:33:31 AM UTC+3, Ofer Zilberstein wrote:
I saw some discussion and workaround about this back is 2014, and
I bring it back ...
large Pleiades image is supplied as a multi-image (large image
broken into non-overlapping tiles).
For example - the XML file
*RPC_PHR1A_PMS_201609270827376_SEN_2033167101-001.XML* describe
image that is devided into 2 tiles:
*IMG_PHR1A_PMS_201609270827376_SEN_2033167101-001_R1C1.JP2*
*IMG_PHR1A_PMS_201609270827376_SEN_2033167101-001_R2C1.JP2*
It is expected that application that supports Pleiades format will
read the image using the above XML and not the separated images...
Unfortunately, it is not the case with OTB command file. I just
tried *otbcli_ReadImageInfo, *but I understand that it is the same
with other commands as well.
Note - Erdas-Imagine-Photogrammetry read the image parts using the
above XML.
Is there a way to overcome this issue? Or I do something wrong ...
Best regards...
Ofer
--
--
Check the OTB FAQ at
http://www.orfeo-toolbox.org/FAQ.html
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/otb-users?hl=en
---
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
Julien MICHEL
CNES - DSO/SI/2A
--
--
Check the OTB FAQ at
http://www.orfeo-toolbox.org/FAQ.html
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/otb-users?hl=en
---
You received this message because you are subscribed to the Google Groups "otb-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
