With some spatial reference system, the OTB application fail to run because the naming of vector and raster coordinate systems are not the same. I guess this comes from OGR/gdal differences, but I would like to know if it is possible to desactivate the check of identical srs (I know that it is a "safety " control, but in my case I know what I am doing.
I have the issue with otbcli_KMeansclassification (no input shp, but one is created during the process) and with otbcli_TrainImagesClassifier, even when I copy/paste the PROJS definition into the prj file. My workaround was to define a wrong projection for both, then come bck to the initial srs, but this is clearly dirty. 2019-01-25 16:06:03 (FATAL): itk::ERROR: > PersistentImageSampleExtractorFilter(0xa10940): Spatial reference of input > image and samples don't match: > PROJCS["Belge 1972 / Belgian Lambert 72", > GEOGCS["Belge 1972", > DATUM["Reseau_National_Belge_1972", > SPHEROID["International 1924",6378388,297, > AUTHORITY["EPSG","7022"]], > > TOWGS84[-106.8686,52.2978,-103.7239,0.3366,-0.457,1.8422,-1.2747], > AUTHORITY["EPSG","6313"]], > PRIMEM["Greenwich",0, > AUTHORITY["EPSG","8901"]], > UNIT["degree",0.0174532925199433, > AUTHORITY["EPSG","9122"]], > AUTHORITY["EPSG","4313"]], > PROJECTION["Lambert_Conformal_Conic_2SP"], > PARAMETER["standard_parallel_1",51.16666723333333], > PARAMETER["standard_parallel_2",49.8333339], > PARAMETER["latitude_of_origin",90], > PARAMETER["central_meridian",4.367486666666666], > PARAMETER["false_easting",150000.013], > PARAMETER["false_northing",5400088.438], > UNIT["metre",1, > AUTHORITY["EPSG","9001"]], > AXIS["X",EAST], > AXIS["Y",NORTH], > AUTHORITY["EPSG","31370"]] > vs > PROJCS["Belge_1972_Belgian_Lambert_72", > GEOGCS["GCS_Belge 1972", > DATUM["Reseau_National_Belge_1972", > SPHEROID["International_1924",6378388,297]], > PRIMEM["Greenwich",0], > UNIT["Degree",0.017453292519943295]], > PROJECTION["Lambert_Conformal_Conic_2SP"], > PARAMETER["standard_parallel_1",51.16666723333333], > PARAMETER["standard_parallel_2",49.8333339], > PARAMETER["latitude_of_origin",90], > PARAMETER["central_meridian",4.367486666666666], > PARAMETER["false_easting",150000.013], > PARAMETER["false_northing",5400088.438], > UNIT["Meter",1]] > -- This mailing will be abandoned soon in favor of a more friendly forum: https://forum.orfeo-toolbox.org Thanks to visit it for any question related to Orfeo Toolbox (OTB) usage, or to check the OTB FAQ: http://www.orfeo-toolbox.org/FAQ.html --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
