- checkout appliance
- make rpms
- rpm -ivh ovirt-appliance.rpm
- /usr/sbin/ovirt-appliance-ctrl install
The install process will take a while, after which you can
access the server by going to http://192.168.50.2/ovirt at
which you can boot and manage vms on your host.
---
.gitignore | 17 +--
Makefile.am | 56 +++++++
autogen.sh | 66 ++++++++
configure.ac | 11 ++
data/appliance.ks | 82 ++++++++++
data/ifcfg-breth0 | 4 +
data/network.xml | 9 +
ovirt-appliance.spec.in | 52 +++++++
scripts/ovirt-appliance-ctrl | 56 +++++++
scripts/ovirt-appliance-functions | 297 +++++++++++++++++++++++++++++++++++++
10 files changed, 639 insertions(+), 11 deletions(-)
create mode 100644 Makefile.am
create mode 100755 autogen.sh
create mode 100644 configure.ac
create mode 100644 data/appliance.ks
create mode 100644 data/ifcfg-breth0
create mode 100644 data/network.xml
create mode 100644 ovirt-appliance.spec.in
create mode 100755 scripts/ovirt-appliance-ctrl
create mode 100644 scripts/ovirt-appliance-functions
diff --git a/.gitignore b/.gitignore
index 1221087..5b4f7d7 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,22 +1,17 @@
-*~
-INSTALL
Makefile
Makefile.in
aclocal.m4
-autom4te.cache/
+autom4te.cache
config.h
config.h.in
config.log
config.status
configure
+depcomp
install-sh
missing
-ovirt-appliance-manifests*.tar
-ovirt-appliance-*-*.tar*
-ovirt-appliance-*-*.tar.sha1sum
-ovirt-appliance-*.tar.gz
-ovirt-appliance.spec
-ovirt-authorized_keys
-repos.ks
stamp-h1
-tmp
+ovirt-appliance*.gz
+ovirt-appliance.spec
+schema.rb
+log/
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..7a104ce
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,56 @@
+# Copyright (C) 2008 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+OVIRT_CACHE_DIR ?= $(HOME)/ovirt-cache
+
+EXTRA_DIST = \
+ .gitignore \
+ ovirt-appliance.spec \
+ ovirt-appliance.spec.in \
+ scripts \
+ data
+
+DISTCLEANFILES = $(PACKAGE)-$(VERSION).tar.gz
+
+# For Release: 0..., set _ovirt_dev=1 so that we get extra_release.GIT-
+# annotated rpm version strings.
+_ovirt_dev = \
+ $(shell grep -q '^[[:space:]]*Release:[[:space:]]*0' \
+ $(srcdir)/*.spec.in && echo 1 || :)
+
+git_head = $$(git log -1 --pretty=format:%h)
+GIT_RELEASE = $$(date --utc +%Y%m%d%H%M%S)git$(git_head)
+RPMDIR = $$(rpm --eval '%{_rpmdir}')
+RPM_FLAGS = --define "ovirt_cache_dir $(OVIRT_CACHE_DIR)"
+RPM_FLAGS += $(if $(_ovirt_dev),--define "extra_release .$(GIT_RELEASE)")
+
+rpms: dist
+ rpmbuild $(RPM_FLAGS) -ta $(distdir).tar.gz
+
+srpms: dist
+ rpmbuild $(RPM_FLAGS) -ts $(distdir).tar.gz
+
+publish: rpms
+ mkdir -p $(OVIRT_CACHE_DIR)
+ rsync -aq $(shell rpm --eval '%{_rpmdir}')/ $(OVIRT_CACHE_DIR)/ovirt/
+ rsync -aq $(shell rpm --eval '%{_srcrpmdir}')/
$(OVIRT_CACHE_DIR)/ovirt/src
+ createrepo $(OVIRT_CACHE_DIR)/ovirt
+
+genlangs:
+ cd src && rake updatepo && rake makemo
+
+.PHONY: rpms publish srpms genlangs
diff --git a/autogen.sh b/autogen.sh
new file mode 100755
index 0000000..6b0970f
--- /dev/null
+++ b/autogen.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+# Run this to generate configure and Makefile
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+THEDIR=`pwd`
+(
+ cd $srcdir
+ die=0
+
+ (autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have autoconf installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/autoconf";
+ die=1
+ }
+
+ # Require libtool only if one of of LT_INIT,
+ # AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac.
+ grep -E '^[[:blank:]]*(LT_INIT|A[CM]_PROG_LIBTOOL)' configure.ac >/dev/null \
+ && {
+ (libtool --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have libtool installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/libtool";
+ die=1
+ }
+ }
+
+ (automake --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ die=1
+ echo "You must have automake installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/automake";
+ }
+
+ test $die = 1 && exit 1
+
+ test -f ovirt-appliance.spec.in || {
+ echo "You must run this script in the top-level directory"
+ exit 1
+ }
+
+ if test -z "$*"; then
+ echo "I am going to run ./configure with no arguments - if you wish "
+ echo "to pass any to it, please specify them on the $0 command line."
+ fi
+
+ aclocal
+
+ # Run autoheader only if needed
+ grep '^[[:blank:]]*AC_CONFIG_HEADERS' configure.ac >/dev/null && autoheader
+
+ automake --add-missing
+ autoconf
+ ./configure "$@"
+)
+
+if test "x$OBJ_DIR" != x; then
+ mkdir -p "$OBJ_DIR"
+ cd "$OBJ_DIR"
+fi
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..db3bc30
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,11 @@
+AC_INIT([ovirt-appliance], [0.101], [[email protected]])
+AM_INIT_AUTOMAKE([-Wall -Werror foreign -Wno-portability tar-pax])
+AC_PROG_CC
+AC_CONFIG_HEADERS([config.h])
+
+# If using gcc and default CFLAGS, enable some warnings.
+test x"$ac_ct_CC:$CFLAGS" = 'xgcc:-g -O2' \
+ && CFLAGS="$CFLAGS -Wshadow -Wall -Werror"
+
+AC_CONFIG_FILES([Makefile ovirt-appliance.spec])
+AC_OUTPUT
diff --git a/data/appliance.ks b/data/appliance.ks
new file mode 100644
index 0000000..39a821c
--- /dev/null
+++ b/data/appliance.ks
@@ -0,0 +1,82 @@
+install
+
+lang en_US.UTF-8
+keyboard us
+
+# setup two nics, one public, one on the private libvirt network we setup
+network --device=eth0 --bootproto=static --ip=192.168.50.2
--netmask=255.255.255.0 --onboot=on --nameserver=192.168.50.1
+network --device=eth1 --onboot=on
+
+# Root password is 'ovirt'
+rootpw --iscrypted Xa8QeYfWrtscM
+
+firewall --disabled
+authconfig --enableshadow --enablemd5
+selinux --disabled
+
+# NOTE: ntp/ntpdate need to stay in this list to ensure that time on the
+# appliance is correct prior to the ovirt-server-installer being run.
Otherwise you
+# get Kerberos errors
+services --disabled=libvirtd,postgresql
--enabled=network,iptables,ntpdate,acpid,sshd
+timezone --utc UTC
+text
+
+bootloader --location=mbr
+clearpart --all --drives=sda
+part /boot --ondisk=sda --fstype=ext3 --size=100
+part / --ondisk=sda --fstype=ext3 --size=10000
+part swap --ondisk=sda --fstype=swap --size=512
+reboot
+
+repo --name=f11
--mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-11&arch=x86_64
+repo --name=f11-updates
--mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=updates-released-f11&arch=x86_64
+#repo --name=f11-rawhide
--mirrorlist=http://mirrors.fedoraproject.org/metalink?repo=rawhide&arch=x86_64
+repo --name=ovirtorg --baseurl=http://ovirt.org/repos/ovirt/11/x86_64/
+repo --name=ovirt --baseurl=file://OVIRT_REPO
+
+%packages --excludedocs --nobase
+%include /usr/share/appliance-os/includes/base-pkgs.ks
+ntpdate
+openssh-server
+openssh-clients
+ovirt-server
+ovirt-server-installer
+ovirt-node-image
+ovirt-node-image-pxe
+%end
+
+%post
+# setup automatic ssh login
+mkdir -p /root/.ssh
+chmod 700 /root/.ssh
+cat > /root/.ssh/authorized_keys << \EOF
+OVIRT_SSH_KEY
+EOF
+chmod 600 /root/.ssh/authorized_keys
+
+# setup the ovirt installer answers
+cat > /root/ovirt-installer-answers << \EOF
+y
+eth1
+eth0
+server.ovirt-appliance.com
+n
+n
+192.168.50
+3
+50
+ovirt-appliance.com
+
+y
+n
+cobbler
+cobbler
+cobbler
+v23zj59an
+v23zj59an
+ovirt-appliance.com
+ovirt
+ovirt
+EOF
+
+%end
diff --git a/data/ifcfg-breth0 b/data/ifcfg-breth0
new file mode 100644
index 0000000..02955b2
--- /dev/null
+++ b/data/ifcfg-breth0
@@ -0,0 +1,4 @@
+DEVICE=breth0
+ONBOOT=yes
+TYPE=Bridge
+PEERNTP=yes
diff --git a/data/network.xml b/data/network.xml
new file mode 100644
index 0000000..8bce0db
--- /dev/null
+++ b/data/network.xml
@@ -0,0 +1,9 @@
+<network>
+ <name>ovirt-appliance</name>
+ <uuid>OVIRT_NETWORK_UUID</uuid>
+ <ip address='192.168.50.1' netmask='255.255.255.0'>
+ <dhcp>
+ <host mac='54:52:00:1a:cb:f0' name='server.ovirt-appliance.com'
ip='192.168.50.2' />
+ </dhcp>
+ </ip>
+</network>
diff --git a/ovirt-appliance.spec.in b/ovirt-appliance.spec.in
new file mode 100644
index 0000000..61bdc8d
--- /dev/null
+++ b/ovirt-appliance.spec.in
@@ -0,0 +1,52 @@
+%define app_root %{_datadir}/%{name}
+
+Summary: oVirt Appliance
+Name: ovirt-appliance
+Version: @VERSION@
+Release: 1%{?dist}%{?extra_release}
+Source0: %{name}-%{version}.tar.gz
+License: GPLv2+
+Group: Applications/System
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
+BuildArch: noarch
+URL: http://ovirt.org/
+#Requires:
+
+%description
+The oVirt Appliance scripts to install on a Fedora Host
+
+%prep
+%setup -q
+
+%build
+
+%install
+%{__rm} -rf %{buildroot}
+mkdir %{buildroot}
+
+%{__install} -d -m0755 %{buildroot}%{_sbindir}
+%{__install} -d -m0755 %{buildroot}%{app_root}
+%{__install} -d -m0755 %{buildroot}%{app_root}/backup
+%{__cp} -a scripts/* %{buildroot}%{app_root}
+%{__cp} -a data/* %{buildroot}%{app_root}
+%{__ln_s} %{app_root}/ovirt-appliance-ctrl %{buildroot}%{_sbindir}/
+
+%clean
+%{__rm} -rf %{buildroot}
+
+%files
+%defattr(-,root,root,0755)
+%{app_root}
+%{_sbindir}/ovirt-appliance-ctrl
+
+%changelog
+* Wed Sep 02 2009 Mohammed Morsi <[email protected]> 0.100-1
+- Revamped entire appliance project to fix it bring it up
+ to speed with the current implementation of oVirt
+* Wed Nov 05 2008 Perry Myers <[email protected]> 0.96
+- Removed appliance building from rpm. RPM now just contains tools to
+ download image and install it
+* Sun Sep 14 2008 Perry Myers <[email protected]> 0.92-1
+- Added Requires on libvirt/kvm
+* Fri Sep 05 2008 Perry Myers <[email protected]> 0.92-1
+- Initial build.
diff --git a/scripts/ovirt-appliance-ctrl b/scripts/ovirt-appliance-ctrl
new file mode 100755
index 0000000..2ac86c6
--- /dev/null
+++ b/scripts/ovirt-appliance-ctrl
@@ -0,0 +1,56 @@
+#!/bin/bash
+# Control script for the oVirt appliance.
+#
+# Use this to setup / install a server appliance running in a vm
+# and a node configuration on the baremetal host.
+#
+# This must be run as a super-user to be successful.
+#
+# Copyright (C) 2008 Red Hat, Inc.
+# Written by Mohammed Morsi <[email protected]>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+. /etc/init.d/functions
+. /usr/share/ovirt-appliance/ovirt-appliance-functions
+
+case "$1" in
+ install)
+ bootstrap_setup
+ build_rpms # would like to make this step optional
+ setup_network
+ setup_server_ssh_access
+ create_server_vm
+ run_server_installer
+ setup_server_env
+ backup_node_env
+ setup_node_env
+ ;;
+ uninstall)
+ bootstrap_teardown
+ destroy_server_vm
+ destroy_network
+ restore_node_env
+ echo "reboot to complete the uninstall process"
+ ;;
+ *)
+ echo "Usage: ovirt-appliance-ctrl {install|uninstall}"
+ exit 1
+ ;;
+esac
+
+exit $RETVAL
+
diff --git a/scripts/ovirt-appliance-functions
b/scripts/ovirt-appliance-functions
new file mode 100644
index 0000000..3ed77fb
--- /dev/null
+++ b/scripts/ovirt-appliance-functions
@@ -0,0 +1,297 @@
+#!/bin/bash
+# Function definitions part of the oVirt appliance setup utility
+#
+# Copyright (C) 2008 Red Hat, Inc.
+# Written by Mohammed Morsi <[email protected]>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+OVIRT_APPLIANCE_DIR="/usr/share/ovirt-appliance"
+OVIRT_APPLIANCE_BACKUP_DIR="$OVIRT_APPLIANCE_DIR/backup"
+OVIRT_APPLIANCE_WORKING_DIR="`mktemp -d`"
+
+# perform any common setup initialization routines
+bootstrap_setup() {
+ unalias cp
+
+ # set selinux to permissive mode
+ /usr/sbin/setenforce 0
+
+ # make sure we aren't localhost so the server can lookup our hostname
+ hostname="`hostname`"
+ if [ "$hostname" == "localhost" -o "$hostname" == "localhost.localdomain" -o
"$hostname" == "" ]; then
+ echo "hostname cannot be localhost (server needs to be able to resolve
it)"
+ hostname host.ovirt-appliance.com
+ cp -f /etc/sysconfig/network $OVIRT_APPLIANCE_BACKUP_DIR
+ sed -i s/HOSTNAME.*$/HOSTNAME\=host\.ovirt-appliance\.com/g
/etc/sysconfig/network
+ hostname host.ovirt-appliance.com
+ fi
+
+ # install the oVirt release rpm if not present
+ rpm -q ovirt-release || rpm -ivh
http://ovirt.org/repos/ovirt/ovirt-release-LATEST.noarch.rpm
+
+ # update our system to have the latest packages, install base packages
+ yum install -y yum-fastestmirror libvirt
+ yum update -y --enablerepo=ovirt
+
+ # copy the files we will be modifying into the working dir
+ cp -f $OVIRT_APPLIANCE_DIR/appliance.ks $OVIRT_APPLIANCE_WORKING_DIR/
+ cp -f $OVIRT_APPLIANCE_DIR/network.xml $OVIRT_APPLIANCE_WORKING_DIR/
+ cp -f $OVIRT_APPLIANCE_DIR/ifcfg-breth0 $OVIRT_APPLIANCE_WORKING_DIR/
+
+ # start up libvirt
+ service libvirtd start
+}
+
+# perform any common teardown initialization routines
+bootstrap_teardown() {
+ unalias cp
+
+ # restore /etc/sysconfig/network if modified
+ test -f $OVIRT_APPLIANCE_BACKUP_DIR/network && cp -f
$OVIRT_APPLIANCE_BACKUP_DIR/network /etc/sysconfig/
+}
+
+# build the neccessary oVirt rpms to install the appliance
+build_rpms() {
+ # install dependencies
+ yum install -y --enablerepo=ovirt \
+ git automake autoconf gcc rpm-build \
+ ruby ruby-devel rubygem-gettext rubygem-rake \
+ libvirt-devel dbus-devel hal-devel hardlink \
+ livecd-tools appliance-tools \
+ publican publican-ovirt
+
+ ### checkout / build oVirt
+
+ # create a build directory, and cd into it
+ saved_dir=`pwd`
+ OVIRT_CHECKOUT_DIR=`mktemp -d`
+ cd $OVIRT_CHECKOUT_DIR
+
+ # clone the release project
+ git clone git://ovirt.org/ovirt-release release
+
+ # setup the cache dir and make update and publish
+ export OVIRT_CACHE_DIR=$(pwd)/cache
+ OVIRT_REPO=$OVIRT_CACHE_DIR/ovirt
+ make -f release/ovirt.mk update publish
+
+ # restore working directory
+ cd $saved_dir
+
+ # swap in the correct local repo in the kickstart
+ sed -i s~OVIRT_REPO~$OVIRT_REPO~g $OVIRT_APPLIANCE_WORKING_DIR/appliance.ks
+}
+
+# setup a libvirt network to act as the oVirt admin network
+setup_network() {
+ # generate a network id and swap it into the network config
+ sed -i s/OVIRT_NETWORK_UUID/`uuidgen`/g
$OVIRT_APPLIANCE_WORKING_DIR/network.xml
+
+ # write the network config to the appropriate place
+ cp -f $OVIRT_APPLIANCE_WORKING_DIR/network.xml
/etc/libvirt/qemu/networks/ovirt-appliance.xml
+
+ # define and start the network via libvirt, set to autostart
+ virsh net-define /etc/libvirt/qemu/networks/ovirt-appliance.xml
+ virsh net-start ovirt-appliance
+ virsh net-autostart ovirt-appliance
+
+ # setup breth0 as its needed to start vms with a network
+ # (backing the old config up first)
+ test -f /etc/sysconfig/network-scripts/ifcfg-breth0 && \
+ cp -f /etc/sysconfig/network-scripts/ifcfg-breth0
$OVIRT_APPLIANCE_BACKUP_DIR/ifcfg-breth0.bak
+ cp -f $OVIRT_APPLIANCE_WORKING_DIR/ifcfg-breth0
/etc/sysconfig/network-scripts/
+ ifup breth0
+}
+
+# destroy / remove the network that was setup
+destroy_network() {
+ # destroy, undefine, and un-autostart the network
+ virsh net-destroy ovirt-appliance
+ virsh net-undefine ovirt-appliance
+ rm -f /etc/libvirt/qemu/networks/ovirt-appliance.xml
+
+ # restore ifcfg-breth0 backup if neccessary
+ test -f $OVIRT_APPLIANCE_BACKUP_DIR/ifcfg-breth0.bak && \
+ cp -f $OVIRT_APPLIANCE_BACKUP_DIR/ifcfg-breth0.bak
/etc/sysconfig/network-scripts/
+}
+
+# setup no-password ssh login for the server
+setup_server_ssh_access() {
+ # create convenience env variables for the ssh params/cmds
+ SSHKEY=~/.ssh/id_ovirt_appliance
+ remote_target="[email protected]"
+ ssh_cmd="ssh -i $SSHKEY -o StrictHostKeyChecking=no \
+ -o UserKnownHostsFile=/dev/null $remote_target"
+ scp_cmd="scp -i $SSHKEY -o StrictHostKeyChecking=no -o
UserKnownHostsFile=/dev/null"
+
+ # generate new ssh key if not found
+ if [ ! -r $SSHKEY ]; then
+ mkdir -p $(dirname "$SSHKEY")
+ ssh-keygen -q -t rsa -N "" -f $SSHKEY
+ fi
+
+ # implant ssh key into the server kickstart
+ sed -i "s~OVIRT_SSH_KEY~`ssh-keygen -y -f $SSHKEY`~g"
$OVIRT_APPLIANCE_WORKING_DIR/appliance.ks
+}
+
+# create and start the server vm
+create_server_vm() {
+ # install dependencies
+ yum install -y --enablerepo=ovirt \
+ appliance-os python-virtinst kvm
+
+
+ # save the current dir, and enter the working dir
+ saved_dir=`pwd`
+ cd $OVIRT_APPLIANCE_WORKING_DIR
+
+ # remove the appliance image if it exists
+ test -d ovirt-appliance && rm -rf ovirt-appliance
+
+ # create the appliance image
+ appliance-creator --config appliance.ks --name ovirt-appliance \
+ -f raw --vmem=2048 -d -v
+
+ # define / start the vm via libvirt, set to autostart
+ virt-image --network=network:ovirt-appliance
ovirt-appliance/ovirt-appliance.xml
+ virsh define /etc/libvirt/qemu/ovirt-appliance.xml
+ virsh autostart ovirt-appliance
+
+ # restore the saved dir
+ cd $saved_dir
+
+ for i in $(seq 1 60); do
+ $ssh_cmd exit && break
+ sleep 10
+ done
+}
+
+# destroy the server vm that was setup
+destroy_server_vm() {
+ # at some point, find a way to destroy the oVirt
+ # managed vms as well
+ virsh destroy ovirt-appliance
+ virsh undefine ovirt-appliance
+}
+
+# run the oVirt server installation process on the server vm
+run_server_installer() {
+ # run the actual installer w/ pre-specified answers (see kickstart)
+ $ssh_cmd "ovirt-installer < /root/ovirt-installer-answers"
+
+ # XXX for whatever reason ovirt-node-image-pxe isn't setting
+ # up the pxe correctly for the node-image iso, just put this
+ # here until we figure out why
+ $ssh_cmd "cd /usr/share/ovirt-node-image/ && \
+ rm -rf tftpboot && \
+ livecd-iso-to-pxeboot ovirt-node-image.iso"
+
+ # XXX another hack needed here to install the old fedora-ds-base
+ # instead of the currently broken 389-ds-base
+ # https://bugzilla.redhat.com/show_bug.cgi?id=518544
+ # http://ovirt.org/install-instructions.html#free-ipa-warning
+ $ssh_cmd "yum install perl-Mozilla-LDAP nss-tools mozldap-tools
lm_sensors-devel net-snmp-devel openssl-devel -y"
+ $ssh_cmd "rpm -ivh
http://kojipkgs.fedoraproject.org/packages/fedora-ds-base/1.2.0/4.fc11/x86_64/fedora-ds-base-1.2.0-4.fc11.x86_64.rpm";
+
+ # run the ace portion of the installer, actuall performing the oVirt installation
+ $ssh_cmd "ace -d install ovirt > /root/install.log"
+}
+
+# perform everything else needed to get the oVirt server
+# to work on a single machine install
+setup_server_env() {
+ # set server resolv.conf to avoid an infinite loop.
+ # set it to the server nameserver, followed by the
+ # nameservers as defined in the host's resolv.conf
+ nameservers=`grep nameserver /etc/resolv.conf`
+ nameservers="nameserver 192.168.50.2
+$nameservers"
+ $ssh_cmd "echo '$nameservers' > /etc/resolv.conf"
+
+ # prepend this hostname onto server's hosts and restart the dns service,
+ # required for kerberos and other components that need to lookup the host
+ $ssh_cmd "echo '192.168.50.1 `hostname`'|cat - /etc/hosts > /tmp/out && mv -f
/tmp/out /etc/hosts"
+ $ssh_cmd "service dnsmasq restart"
+
+ # add priciples to the kerberos server allowing node access
+ #$ssh_cmd /usr/bin/ovirt-add-host `hostname`
/usr/share/ovirt-server/ovirt.keytab
+ $ssh_cmd "echo 'addprinc -randkey libvirt/`[email protected]' |
kadmin.local"
+ $ssh_cmd "echo 'addprinc -randkey qpidd/`[email protected]' |
kadmin.local"
+ $ssh_cmd "echo 'ktadd -k /usr/share/ipa/html/`hostname`-libvirt.tab
libvirt/`[email protected]' | kadmin.local"
+ $ssh_cmd "echo 'ktadd -k /usr/share/ipa/html/`hostname`-libvirt.tab
qpidd/`[email protected]' | kadmin.local"
+}
+
+# backup all config files modified by setup_node_env
+backup_node_env() {
+ test -f /etc/resolv.conf && cp -f /etc/resolv.conf
$OVIRT_APPLIANCE_BACKUP_DIR
+ test -f /etc/krb5.conf && cp -f /etc/krb5.conf
$OVIRT_APPLIANCE_BACKUP_DIR
+ test -f /etc/libvirt/krb5.tab/ && cp -f /etc/libvirt/krb5.tab
$OVIRT_APPLIANCE_BACKUP_DIR
+ test -f /etc/sysconfig/libvirt-qpid && cp -f /etc/sysconfig/libvirt-qpid
$OVIRT_APPLIANCE_BACKUP_DIR
+ test -f /etc/sysconfig/matahari && cp -f /etc/sysconfig/matahari
$OVIRT_APPLIANCE_BACKUP_DIR
+}
+
+# perform everything else needed to get the oVirt node/host
+# to work on a single machine install
+setup_node_env() {
+ # install dependencies
+ yum install -y --enablerepo=ovirt \
+ wget libvirt-qpid cyrus-sasl-gssapi
+ # selinux-policy-doc \
+
+ # sync up our system time w/ the server's ntp server
+ ntpdate 192.168.50.2
+
+ # prepend the ovirt server's dns nameserver onto the local resolv.conf,
+ # so that we can perform the appliance domain lookups
+ echo "nameserver 192.168.50.2"|cat - /etc/resolv.conf > /tmp/out && mv -f
/tmp/out /etc/resolv.conf
+
+ # grab the kerberos config
+ wget -q --no-check-certificate http://192.168.50.2:80/ipa/config/krb5.ini
-O /etc/krb5.conf
+
+ # grab key/ticket off the server, and initialize kerberos w/ it
+ $scp_cmd $remote_target:/usr/share/ipa/html/`hostname`-libvirt.tab
/etc/libvirt/krb5.tab
+ /usr/kerberos/bin/kinit -k -t /etc/libvirt/krb5.tab qpidd/`hostname`
+
+ # setup the libvirt-qpid / matahari sysconfig
+ echo "LIBVIRT_QPID_ARGS=\"--broker 192.168.50.2 --port 5672\""
>> /etc/sysconfig/libvirt-qpid
+ echo "/usr/kerberos/bin/kinit -k -t /etc/libvirt/krb5.tab qpidd/`hostname`"
>> /etc/sysconfig/libvirt-qpid
+ echo "MATAHARI_ARGS=\"--broker 192.168.50.2 --port 5672\""
>> /etc/sysconfig/matahari
+ echo "/usr/kerberos/bin/kinit -k -t /etc/libvirt/krb5.tab qpidd/`hostname`"
>> /etc/sysconfig/matahari
+
+ # restart libvirt and start libvirt-qpid
+ service libvirtd restart
+ service libvirt-qpid start
+
+ # install matahari (XXX yum install it when it is availabe in the repos)
+ rpm -q matahari || rpm -ivh
http://kojipkgs.fedoraproject.org/packages/matahari/0.0.4/4.fc11/x86_64/matahari-0.0.4-4.fc11.x86_64.rpm
+
+ # and start it
+ sudo service matahari start
+
+ # run ovirt awake to register us w/ the server
+ #bash checkout/node/scripts/ovirt-awake start 192.168.50.2 12120
/etc/libvirt/krb5.tab
+
+ # FIXME on reboot we need to setenforce 0, ifup breth0, resetup resolv.conf
(on both server/node), start libvirt-qpid / matahari
+}
+
+restore_node_env(){
+ test -f $OVIRT_APPLIANCE_BACKUP_DIR/resolv.conf && cp -f
$OVIRT_APPLIANCE_BACKUP_DIR/resolv.conf /etc
+ test -f $OVIRT_APPLIANCE_BACKUP_DIR/krb5.conf && cp -f
$OVIRT_APPLIANCE_BACKUP_DIR/krb5.conf /etc
+ test -f $OVIRT_APPLIANCE_BACKUP_DIR/libvirt/krb5.tab/ && cp -f
$OVIRT_APPLIANCE_BACKUP_DIR/krb5.tab /etc
+ test -f $OVIRT_APPLIANCE_BACKUP_DIR/libvirt-qpid && cp -f
$OVIRT_APPLIANCE_BACKUP_DIR/libvirt-qpid /etc/sysconfig
+ test -f $OVIRT_APPLIANCE_BACKUP_DIR/matahari && cp -f
$OVIRT_APPLIANCE_BACKUP_DIR/matahari /etc/sysconfig
+}
