Hi,
    I have an OVS bridge br0 with no NICs and  1 vhost user port which is 
connected to a VM. But ping fails between the VM and the br0 port, either way. 
The stats show zero all the time. Inside the VM, tcpdump shows nothing.

This is with OVS 2.7.0 and DPDK 17.02. Please indicate what could be going 
wrong.

In the host, the bridge's internal port is up.
# ip addr show br0
24: br0: <BROADCAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN 
qlen 500
    link/ether 52:2f:57:13:d8:40 brd ff:ff:ff:ff:ff:ff
    inet 200.1.1.1/24 scope global br0
       valid_lft forever preferred_lft forever

In the VM, the eth interface is up with address 200.1.1.2/24.

The ports are in the following state, even after "ovs-ofctl mod-port br0 vi1 
up":
# ovs-ofctl dump-ports-desc br0
OFPST_PORT_DESC reply (xid=0x2):
5(vi1): addr:00:00:00:00:00:00
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max
LOCAL(br0): addr:52:2f:57:13:d8:40
     config:     0
     state:      0
     current:    10MB-FD COPPER
     speed: 10 Mbps now, 0 Mbps max

The flows are configured as below:
# ovs-ofctl dump-flows br0
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=2833.612s, table=0, n_packets=0, n_bytes=0, idle_age=2833, 
in_port=1 actions=output:5
cookie=0x2, duration=2819.820s, table=0, n_packets=0, n_bytes=0, idle_age=2819, 
in_port=5 actions=output:1

The table info is as below:
# ovs-ofctl dump-tables br0 | more
OFPST_TABLE reply (xid=0x2):
  table 0 ("classifier"):
    active=2, lookup=37, matched=28
    max_entries=1000000
    matching:
      in_port: exact match or wildcard
      eth_src: exact match or wildcard
      eth_dst: exact match or wildcard
      eth_type: exact match or wildcard
      vlan_vid: exact match or wildcard
      vlan_pcp: exact match or wildcard
      ip_src: exact match or wildcard
      ip_dst: exact match or wildcard
      nw_proto: exact match or wildcard
      nw_tos: exact match or wildcard
      tcp_src: exact match or wildcard
      tcp_dst: exact match or wildcard

  table 1 ("table1"):
   active=0, lookup=0, matched=0
    (same features)

Thanks,
Sundar




Regards,
Sundar

_______________________________________________
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to