The ovs_flow spec described get and new only, so a YNL client could not delete or modify a flow. Both commands have been in the kernel since the family was added: del flushes the data path when a request carries no key and no valid ufid, and set looks a flow up by key or by ufid.
List the attributes each command reads. new reads ufid-flags and probe as well as the key, so those go in its request list. new, del and set need CAP_NET_ADMIN. A dump reads ufid-flags and nothing else. It shared the get request list, which let a client send a key and a ufid the kernel ignores, so give it a request list of its own. The reply stays the same as for get. probe was binary while the kernel policy is NLA_FLAG. A YNL client leaves out a false flag, where it sent an empty binary attribute before. The key and the actions docs called those attributes always present in notifications. A flow identified by a ufid sends neither when the request asked for it to be left out, and a get reply follows the same rule. A dump also leaves the actions out when they do not fit in the message. The key doc said a key is required for every request except a dump. The kernel accepts a ufid with no key, but a get and a set need one of the two, and a set that replaces the actions needs a key. A new request needs a key, including one that finds an existing flow and replaces its actions, and a del that carries no key and no valid ufid flushes the data path. The ufid doc promised that the flow is indexed by that value, which does not hold for a value the kernel rejects. Anything outside 1-16 octets is read as if the attribute were absent, so a del with such a ufid and no key flushes the data path, and a new request indexes the flow by its key instead. Say so, and record the minimum length the policy enforces in the attribute. Fix the same sentences in the uapi header. The spec text was copied from there, and the two descriptions disagreed once this patch changed the spec. The ops skip strict and dump validation in the kernel, so the spec says so for get, new, del and set. Signed-off-by: Minxi Hou <[email protected]> --- Documentation/netlink/specs/ovs_flow.yaml | 86 +++++++++++++++++++---- include/uapi/linux/openvswitch.h | 23 ++++-- 2 files changed, 88 insertions(+), 21 deletions(-) diff --git a/Documentation/netlink/specs/ovs_flow.yaml b/Documentation/netlink/specs/ovs_flow.yaml index 951837b72e1d..bfdbf55bc219 100644 --- a/Documentation/netlink/specs/ovs_flow.yaml +++ b/Documentation/netlink/specs/ovs_flow.yaml @@ -383,19 +383,27 @@ attribute-sets: type: nest nested-attributes: key-attrs doc: | - Nested attributes specifying the flow key. Always present in - notifications. Required for all requests (except dumps). + Nested attributes specifying the flow key. Present in replies and + notifications, except for a flow identified by a ufid when the + request asked for the key to be left out. A get, set or del may + carry a ufid instead of a key; a get and a set need one of the + two, and a set that replaces the actions needs a key. A new + request needs a key, including one that finds an existing flow and + replaces its actions. A dump reads neither the key nor the ufid. A + del that carries no key and no valid ufid flushes the data path. - name: actions type: nest nested-attributes: action-attrs doc: | Nested attributes specifying the actions to take for packets that - match the key. Always present in notifications. Required for - OVS_FLOW_CMD_NEW requests, optional for OVS_FLOW_CMD_SET requests. An - OVS_FLOW_CMD_SET without OVS_FLOW_ATTR_ACTIONS will not modify the - actions. To clear the actions, an OVS_FLOW_ATTR_ACTIONS without any - nested attributes must be given. + match the key. Present in replies and notifications, except when + the request asked for the actions to be left out, and in a dump + when they do not fit in the message. Required for + OVS_FLOW_CMD_NEW requests, optional for OVS_FLOW_CMD_SET requests. + An OVS_FLOW_CMD_SET without OVS_FLOW_ATTR_ACTIONS will not modify + the actions. To clear the actions, an OVS_FLOW_ATTR_ACTIONS + without any nested attributes must be given. - name: stats type: binary @@ -438,18 +446,22 @@ attribute-sets: are exact match bits. - name: probe - type: binary + type: flag doc: | Flow operation is a feature probe, error logging should be suppressed. - name: ufid type: binary + checks: + min-len: 1 doc: | A value between 1-16 octets specifying a unique identifier for the flow. Causes the flow to be indexed by this value rather than the - value of the OVS_FLOW_ATTR_KEY attribute. Optional for all - requests. Present in notifications if the flow was created with this - attribute. + value of the OVS_FLOW_ATTR_KEY attribute. A request that carries a + value outside that range is treated as if it carried no ufid, so a + new flow is indexed by its key. Optional for all requests. Present + in notifications if the flow was created with this attribute. + Ignored in a dump. display-hint: uuid - name: ufid-flags @@ -969,25 +981,33 @@ operations: doc: Get / dump OVS flow configuration and state value: 3 attribute-set: flow-attrs - do: &flow-get-op + dont-validate: [strict, dump] + do: request: attributes: - key - ufid - ufid-flags - reply: + - probe + reply: &flow-get-reply attributes: - key - ufid - mask - stats - actions - dump: *flow-get-op + dump: + request: + attributes: + - ufid-flags + reply: *flow-get-reply - name: new doc: Create OVS flow configuration in a data path value: 1 attribute-set: flow-attrs + dont-validate: [strict, dump] + flags: [uns-admin-perm] do: request: attributes: @@ -995,6 +1015,44 @@ operations: - ufid - mask - actions + - ufid-flags + - probe + - + name: del + doc: | + Delete one flow, or every flow in the data path. A request that + carries no key and no valid ufid flushes the data path. + value: 2 + attribute-set: flow-attrs + dont-validate: [strict, dump] + flags: [uns-admin-perm] + do: + request: + attributes: + - key + - ufid + - ufid-flags + - probe + - + name: set + doc: | + Modify an existing flow. The kernel rejects the request with + -EINVAL when it carries neither a key nor a ufid. Replacing the + actions also needs a key: a ufid on its own is not enough. + value: 4 + attribute-set: flow-attrs + dont-validate: [strict, dump] + flags: [uns-admin-perm] + do: + request: + attributes: + - key + - ufid + - mask + - actions + - ufid-flags + - clear + - probe mcast-groups: list: diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index 440825e65837..4c5625c8c1cf 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -624,11 +624,18 @@ struct ovs_nsh_key_md1 { /** * enum ovs_flow_attr - attributes for %OVS_FLOW_* commands. * @OVS_FLOW_ATTR_KEY: Nested %OVS_KEY_ATTR_* attributes specifying the flow - * key. Always present in notifications. Required for all requests (except - * dumps). + * key. Present in replies and notifications, except for a flow identified + * by a ufid when the request asked for the key to be left out. A get, set + * or del may carry a ufid instead of a key; a get and a set need one of the + * two, and a set that replaces the actions needs a key. A new request needs + * a key, including one that finds an existing flow and replaces its + * actions. A dump reads neither of the two, and a del carrying no key and + * no valid ufid flushes the data path. * @OVS_FLOW_ATTR_ACTIONS: Nested %OVS_ACTION_ATTR_* attributes specifying - * the actions to take for packets that match the key. Always present in - * notifications. Required for %OVS_FLOW_CMD_NEW requests, optional for + * the actions to take for packets that match the key. Present in replies + * and notifications, except when the request asked for the actions to be + * left out, and in a dump when they do not fit in the message. Required + * for %OVS_FLOW_CMD_NEW requests, optional for * %OVS_FLOW_CMD_SET requests. An %OVS_FLOW_CMD_SET without * %OVS_FLOW_ATTR_ACTIONS will not modify the actions. To clear the actions, * an %OVS_FLOW_ATTR_ACTIONS without any nested attributes must be given. @@ -655,9 +662,11 @@ struct ovs_nsh_key_md1 { * should be suppressed. * @OVS_FLOW_ATTR_UFID: A value between 1-16 octets specifying a unique * identifier for the flow. Causes the flow to be indexed by this value rather - * than the value of the %OVS_FLOW_ATTR_KEY attribute. Optional for all - * requests. Present in notifications if the flow was created with this - * attribute. + * than the value of the %OVS_FLOW_ATTR_KEY attribute. A request that carries + * a value outside that range is treated as if it carried no ufid, so a new + * flow is indexed by its key. Optional for all requests. Present in + * notifications if the flow was created with this attribute. Ignored in a + * dump. * @OVS_FLOW_ATTR_UFID_FLAGS: A 32-bit value of OR'd %OVS_UFID_F_* * flags that provide alternative semantics for flow installation and * retrieval. Optional for all requests. -- 2.56.0 _______________________________________________ dev mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-dev
