Mirror port only receives mirrored packets. I would remove the flag, and uses inport and outport to mark the mirrored packets.
Thanks. Russell Bryant <russ...@ovn.org> 2017/09/06 02:57 收件人: wang.qia...@zte.com.cn, 抄送: Gao Zhenyu <sysugaozhe...@gmail.com>, ovs dev <d...@openvswitch.org>, xurong00037997 <xu.r...@zte.com.cn>, zhou.huij...@zte.com.cn 主题: Re: 答复: Re: 答复: Re: [ovs-dev] 答复: Re: [PATCH v2] ovn: Support for taas(tap-as-a-service) function What if a mirror port *only* receives mirrored packets? If the only packets it ever receives are mirrored packets, a new flag would not be necessary. Do you intend for the port to operate as both a regular port *and* to receive a mirror of traffic for another port? On Thu, Aug 24, 2017 at 10:31 PM, <wang.qia...@zte.com.cn> wrote: I know your mean. The receiver need to distinguish the traffic is regular or mirror. This may need some special flow table to deal with it. Thanks Gao Zhenyu <sysugaozhe...@gmail.com> 2017/08/25 10:12 收件人: wang.qia...@zte.com.cn, 抄送: ovs dev <d...@openvswitch.org>, Russell Bryant < russ...@ovn.org>, xurong00037997 <xu.r...@zte.com.cn>, zhou.huij...@zte.com.cn 主题: Re: 答复: Re: [ovs-dev] 答复: Re: [PATCH v2] ovn: Support for taas(tap-as-a-service) function I mean for regular packet, ovs should not add the geneve option, the new geneve option is only for mirror traffic. Did you meant some mirror traffic has mirror flag and some would not have? Thanks Zhenyu Gao 2017-08-25 9:44 GMT+08:00 <wang.qia...@zte.com.cn>: Hi zhenyu, Thanks for your opinion. The mirror flag is not always exist, so I do not think add a new geneve option is a good idea. Thanks. Gao Zhenyu <sysugaozhe...@gmail.com> 2017/08/25 09:34 收件人: wang.qia...@zte.com.cn, 抄送: Russell Bryant <russ...@ovn.org>, ovs dev < d...@openvswitch.org>, zhou.huij...@zte.com.cn, xurong00037997 < xu.r...@zte.com.cn> 主题: Re: [ovs-dev] 答复: Re: [PATCH v2] ovn: Support for taas(tap-as-a-service) function Although adding a new geneve option is more complicate but I think it still worth having that. Once the destination chassis found that geneve option, it can tag the mirror flag on packet. And it make the whole process looks same no matter on same chassis or not. Thanks Zhenyu Gao 2017-08-25 9:15 GMT+08:00 <wang.qia...@zte.com.cn>: Hi Russell, Thanks for your review. When the mirror destination is in other chassis, the mirror flag which used to mark the packet need be transmitted to the destination chassis. We could use the inport, geneve option or new type of out port to indicate the packet as a mirrored packet. When we use inport to indicate the flag, this may need use inport as the match field in the egress pipeline, I think this may conflict with the egress pipeline. If use geneve option to deliver the mirror flag, this may be more complicated. So, I add a new type of port as the destination of mirror flow. The port types of mirror and taas corresponding to configurations of tap-flow and tap-service. Thanks. Russell Bryant <russ...@ovn.org> 2017/08/25 04:44 收件人: wang.qia...@zte.com.cn, 抄送: ovs dev <d...@openvswitch.org>, zhou.huij...@zte.com.cn, xurong00037997 <xu.r...@zte.com.cn> 主题: Re: [ovs-dev] [PATCH v2] ovn: Support for taas(tap-as-a-service) function Sorry for the delay in getting back to this ... On Tue, Aug 15, 2017 at 4:28 AM, <wang.qia...@zte.com.cn> wrote: > Taas was designed to provide tenants and service providers a means of > monitoring the traffic flowing in their Neutron provisioned virtual > networks. It is useful for network trouble-shooting, security and > analytics. The taas presentations could be found from > https://github.com/openstack/tap-as-a-service/blob/master/doc/source/presentations.rst > , and the api reference could be found from > https://github.com/openstack/tap-as-a-service/blob/master/API_REFERENCE.rst > > To support taas function, this patch add two type of logica_switch_port, > "mirror" and "taas". port with type "mirror" is used as inport for monitor > flow in logica_switch, and port with type "taas" is used as outport for > monitor flow in logica_switch. > > The ovn-controller will make the relations of the ports in tap_service and > tap_flow to mirror port and taas port. > > Signed-off-by: wang qianyu <wang.qia...@zte.com.cn> > diff --git a/ovn/ovn-nb.xml b/ovn/ovn-nb.xml > index 31303a8..5fdd045 100644 > --- a/ovn/ovn-nb.xml > +++ b/ovn/ovn-nb.xml > @@ -301,6 +301,20 @@ > <dd> > A port to a logical switch on a VTEP gateway. > </dd> > + > + <dt><code>mirror</code></dt> > + <dd> > + A port indicate the inport of mirrored flows. The user need > to > + create this port in the logical_switch. This port should one > to > + one correspondence with the the tap_flows > + </dd> > + > + <dt><code>taas</code></dt> > + <dd> > + A port indicate the outport of mirrored flows. The user need > to > + create this port in logical_switch. This port should one to > + one correspondence with the the tap_service. > + </dd> > </dl> > </column> > </group> > @@ -445,6 +459,61 @@ > interface, in bits. > </column> > </group> > + > + <group title="Options for mirror ports"> > + <p> > + These options apply when <ref column="type"/> is > + <code>mirror</code>. > + </p> > + > + <column name="options" key="source-port"> > + Required. The <ref column="name"/> of the <ref > + table="Logical_switch_Port"/> that indicates where the > + cloned flows come from. > + </column> > + > + <column name="options" key="taas-port"> > + Required. The <ref column="name"/> of the <ref > + table="Logical_switch_Port"/> with type taas. > + </column> > + > + <column name="options" key="direction"> > + <p> > + This option indicates whitch direction(from-port/to-port/all) > of > + packet will be cloned to the taas-port. The directions are > defined > + as follow: > + </p> > + <dl> > + <dt><code>from-port</code></dt> > + <dd> > + The packets from this port will be cloned to specified > mirror > + port. > + </dd> > + <dt><code>to-port</code></dt> > + <dd> > + The packets to this port will be cloned to specified mirror > + port. > + </dd> > + <dt><code>both</code></dt> > + <dd> > + The packets both from and to this port will be cloned to > + specified mirror port. > + </dd> > + </dl> > + </column> > + </group> > + > + <group title="Options for taas ports"> > + <p> > + These options apply when <ref column="type"/> is > <code>taas</code>. > + </p> > + > + <column name="options" key="target-port"> > + Required. The <ref column="name"/> of the <ref > + table="Logical_switch_Port"/> that indicates where the > + cloned flows come to. > + </column> > + </group> > </group> > > <group title="Containers"> I'm having a hard time understanding this schema. Could you expand on why both a "mirror" and "taas" port type was needed? I was hoping for only a single new port type, "mirror" for example, with options to specify what port it is receiving a mirror of traffic for. Does something like that not express everything needed here? -- Russell Bryant _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev -- Russell Bryant _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev