On 02.11.2018 1:31, Ian Stokes wrote:
> Report the link speed of the device in netdev_dpdk_get_status()
> function.
>
> Link speed is already reported as part of the netdev_get_features()
> function. However only link speeds defined in the OpenFlow specs are
> supported so speeds such as 25 Gbps etc. are not shown. The link
> speed for the device is available in Mbps in rte_eth_link.
> This commit converts the link speed for a given dpdk device to an
> easy to read string and reports it in get_status().
>
> Suggested-by: Flavio Leitner <[email protected]>
> Signed-off-by: Ian Stokes <[email protected]>
> ---
> v1 -> v2
> * Replace snprintf with a return call of for each string.
> ---
> lib/netdev-dpdk.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/lib/netdev-dpdk.c b/lib/netdev-dpdk.c
> index 59f4ccbfe..5e6a72bc9 100644
> --- a/lib/netdev-dpdk.c
> +++ b/lib/netdev-dpdk.c
> @@ -3021,11 +3021,37 @@ netdev_dpdk_vhost_user_get_status(const struct netdev
> *netdev,
> return 0;
> }
>
> +/*
> + * Convert a given uint32_t link speed defined in DPDK to a string
> + * equivalent.
> + */
> +static const char *
> +netdev_dpdk_link_speed_to_str__(uint32_t link_speed)
> +{
> + switch (link_speed) {
> + case ETH_SPEED_NUM_10M: return "10Mbps";
> + case ETH_SPEED_NUM_100M: return "100Mbps";
> + case ETH_SPEED_NUM_1G: return "1Gbps";
> + case ETH_SPEED_NUM_2_5G: return "2.5Gbps";
> + case ETH_SPEED_NUM_5G: return "5Gbps";
> + case ETH_SPEED_NUM_10G: return "10Gbps";
> + case ETH_SPEED_NUM_20G: return "20Gbps";
> + case ETH_SPEED_NUM_25G: return "25Gbps";
> + case ETH_SPEED_NUM_40G: return "40Gbps";
> + case ETH_SPEED_NUM_50G: return "50Gbps";
> + case ETH_SPEED_NUM_56G: return "56Gbps";
> + case ETH_SPEED_NUM_100G: return "100Gbps";
> + default: return "Not Defined";
> + }
> +}
> +
> static int
> netdev_dpdk_get_status(const struct netdev *netdev, struct smap *args)
> {
> struct netdev_dpdk *dev = netdev_dpdk_cast(netdev);
> struct rte_eth_dev_info dev_info;
> + struct rte_eth_link link;
> + const char *link_speed_str;
>
> if (!rte_eth_dev_is_valid_port(dev->port_id)) {
> return ENODEV;
> @@ -3033,6 +3059,7 @@ netdev_dpdk_get_status(const struct netdev *netdev,
> struct smap *args)
>
> ovs_mutex_lock(&dev->mutex);
> rte_eth_dev_info_get(dev->port_id, &dev_info);
> + link = dev->link;
> ovs_mutex_unlock(&dev->mutex);
>
> smap_add_format(args, "port_no", DPDK_PORT_ID_FMT, dev->port_id);
> @@ -3064,6 +3091,14 @@ netdev_dpdk_get_status(const struct netdev *netdev,
> struct smap *args)
> dev_info.pci_dev->id.device_id);
> }
>
> + /* Not all link speeds are defined in the OpenFlow specs e.g. 25 Gbps.
> + * In that case the speed will not be reported as part of the usual
> + * call to get_features(). Get the link speed of the device and add it
> + * to the device status in an easy to read string format.
> + */
> + link_speed_str = netdev_dpdk_link_speed_to_str__(link.link_speed);
> + smap_add_format(args, "link_speed", "%s", link_speed_str);
How about this:
smap_add(args, "link_speed",
netdev_dpdk_link_speed_to_str__(link.link_speed));
?
> +
> return 0;
> }
>
>
_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
