Bleep bloop. Greetings Ophir Munk, I am a robot and I have tried out your
patch.
Thanks for your contribution.
I encountered some error that I wasn't expecting. See the details below.
checkpatch:
WARNING: Line is 160 characters long (recommended limit is 79)
#85 FILE: Documentation/topics/dpdk/phy.rst:286:
In the following example we create one representor on PF address
``0000:05:00.0``. Once the NIC is bounded to a DPDK compatible PMD the
representor is created::
WARNING: Line is 116 characters long (recommended limit is 79)
#91 FILE: Documentation/topics/dpdk/phy.rst:292:
In the following example we create two representors on PF address
``0000:05:00.0`` and net device name ``enp3s0f0``.
WARNING: Line is 164 characters long (recommended limit is 79)
#93 FILE: Documentation/topics/dpdk/phy.rst:294:
- Ensure SR-IOV is enabled on the system. Enable IOMMU in Linux by adding
``intel_iommu=on`` to kernel parameters, for example, using GRUB (see
/etc/grub/grub.conf)
WARNING: Line is 82 characters long (recommended limit is 79)
#98 FILE: Documentation/topics/dpdk/phy.rst:299:
05:00.0 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
WARNING: Line is 82 characters long (recommended limit is 79)
#99 FILE: Documentation/topics/dpdk/phy.rst:300:
05:00.1 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
WARNING: Line is 82 characters long (recommended limit is 79)
#108 FILE: Documentation/topics/dpdk/phy.rst:309:
05:00.0 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
WARNING: Line is 82 characters long (recommended limit is 79)
#109 FILE: Documentation/topics/dpdk/phy.rst:310:
05:00.1 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
WARNING: Line is 99 characters long (recommended limit is 79)
#110 FILE: Documentation/topics/dpdk/phy.rst:311:
05:00.2 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4 Virtual Function]
WARNING: Line is 99 characters long (recommended limit is 79)
#111 FILE: Documentation/topics/dpdk/phy.rst:312:
05:00.3 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4 Virtual Function]
WARNING: Line has trailing whitespace
#113 FILE: Documentation/topics/dpdk/phy.rst:314:
- Unbind the relevant VFs 0000:05:00.2..0000:05:00.3::
WARNING: Line is 118 characters long (recommended limit is 79)
#118 FILE: Documentation/topics/dpdk/phy.rst:319:
- The Mellanox NIC has an e-switch on it. Change the e-switch mode from legacy
to switchdev using the PF PCI address::
Lines checked: 157, Warnings: 11, Errors: 0
Please check this out. If you feel there has been an error, please email
[email protected]
Thanks,
0-day Robot
_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
