Hi,
I just finished compiling OVS 2.11.0 packages for Ubuntu 18.04 using the
Debian upstream source package. I was experimenting with tunnels to create
an overlay network to connect multiple KVM hypervisors. One of the options
I tried to use was an STT tunnel. However, it appears that the STT protocol
didn't get included in the binary somehow. Does it need to be enabled with
a build flag? The STT option also doesn't work with IPsec, but the manual
says it should.
2019-04-10T17:26:44.063Z|00041|netdev_vport|WARN|stt0: unknown stt argument
'remote_cert'
2019-04-10T17:26:44.064Z|00042|dpif|WARN|system@ovs-system: failed to add
stt0 as port: Address family not supported by protocol
2019-04-10T17:26:44.064Z|00043|bridge|WARN|could not add network device
stt0 to ofproto (Address family not supported by protocol)
root@bm002:~# ovs-vsctl show
75ef1aaf-a31a-4e87-b3d3-94241d9b7125
Bridge "overlay0"
Port "overlay0"
Interface "overlay0"
type: internal
Port "stt0"
Interface "stt0"
type: stt
options: {local_ip="10.3.40.52", remote_ip="10.3.40.51"}
error: "could not add network device stt0 to ofproto
(Address family not supported by protocol)"
ovs_version: "2.11.0"
--
*Nikolas Britton*
*Senior Deployment Engineer, Mirantis*
12301-B Riata Trace Pkwy Bldg #2, Suite 150, Austin, Texas
_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
