On Tue, Nov 12, 2019 at 10:49 PM Mark Michelson <mmich...@redhat.com> wrote:
>
> Hi Numan,
>
> A couple of things:
>
> 1) It appears that configure will now fail if python3 is not found. Does
> this mean python is no longer optional when building?
I think so. To compile OVN we need to compile OVS and OVS fails anyway if
python3 is not present.
If so, I think
> that needs to be reflected in the commit message. Also, if it's
> required, then I don't see the point of having the HAVE_PYTHON3 variable.
Sure. I will update the commit message and remove HAVE_PYTHON3 variable.
>
> 2) I think ovn-detrace requires some further changes. For instance, it
> uses the non-function version of "print". Dumitru is working on a change
> to ovn-detrace [1] that, as a side effect, is switching to using the
> print function instead. It's possible that if we get his change in
> first, then all you would need to do is to remove his "from future
> import print_function" line and things would just work.
Ok. I will take a look at ovn-detrace.
Thanks
Numan
>
> I'm not sure if there are other python2-isms present in ovn-detrace or
> other python utilities.
>
> On 11/12/19 11:31 AM, num...@ovn.org wrote:
> > From: Numan Siddique <num...@ovn.org>
> >
> > OVS removed the support for Python 2 in the commit [1].
> > And its time we do the same for OVN.
> >
> > This patch takes care of removing Python 2 references.
> >
> > [1] - 1ca0323e7c29("Require Python 3 and remove support for Python 2.")
> >
> > Signed-off-by: Numan Siddique <num...@ovn.org>
> > ---
> > Makefile.am | 12 ++--
> > automake.mk | 8 +--
> > build-aux/dpdkstrip.py | 2 +-
> > build-aux/sodepends.py | 2 +-
> > build-aux/soexpand.py | 2 +-
> > configure.ac | 2 -
> > ipsec/ovs-monitor-ipsec.in | 2 +-
> > m4/ovn.m4 | 89 ++-----------------------
> > rhel/ovn-fedora.spec.in | 35 +---------
> > tests/atlocal.in | 16 +----
> > tests/checkpatch.at | 2 -
> > tests/ovn-controller-vtep.at | 1 -
> > tests/ovn-northd.at | 10 ---
> > tests/ovn.at | 62 -----------------
> > tests/ovsdb-macros.at | 4 --
> > tests/system-kmod-macros.at | 1 -
> > tests/system-userspace-macros.at | 1 -
> > utilities/bugtool/automake.mk | 2 -
> > utilities/ovn-detrace.in | 2 +-
> > utilities/ovn-docker-overlay-driver.in | 2 +-
> > utilities/ovn-docker-underlay-driver.in | 2 +-
> > 21 files changed, 28 insertions(+), 231 deletions(-)
> >
> > diff --git a/Makefile.am b/Makefile.am
> > index 1e41e49ea..8eed7a72b 100644
> > --- a/Makefile.am
> > +++ b/Makefile.am
> > @@ -71,7 +71,7 @@ endif
> > # foo/__init__.pyc will cause Python to ignore foo.py.
> > run_python = \
> > PYTHONPATH=$(OVS_SRCDIR)/python$(psep)$$PYTHONPATH \
> > - PYTHONDONTWRITEBYTECODE=yes $(PYTHON)
> > + PYTHONDONTWRITEBYTECODE=yes $(PYTHON3)
> >
> > ALL_LOCAL =
> > BUILT_SOURCES =
> > @@ -165,13 +165,13 @@ ro_shell = printf '\043 Generated automatically -- do
> > not modify! -*- buffer-
> >
> > SUFFIXES += .in
> > .in:
> > -
> > $(AM_V_GEN)PYTHONPATH=$(OVS_SRCDIR)/python$(psep)$$PYTHONPATH$(psep)$(srcdir)/python
> > $(PYTHON) $(srcdir)/build-aux/soexpand.py -I$(srcdir) -I$(OVS_SRCDIR) < $<
> > | \
> > - $(PYTHON) $(srcdir)/build-aux/dpdkstrip.py $(DPDKSTRIP_FLAGS) | \
> > +
> > $(AM_V_GEN)PYTHONPATH=$(OVS_SRCDIR)/python$(psep)$$PYTHONPATH$(psep)$(srcdir)/python
> > $(PYTHON3) $(srcdir)/build-aux/soexpand.py -I$(srcdir) -I$(OVS_SRCDIR) <
> > $< | \
> > + $(PYTHON3) $(srcdir)/build-aux/dpdkstrip.py $(DPDKSTRIP_FLAGS) | \
> > sed \
> > -e 's,[@]PKIDIR[@],$(PKIDIR),g' \
> > -e 's,[@]LOGDIR[@],$(LOGDIR),g' \
> > -e 's,[@]DBDIR[@],$(DBDIR),g' \
> > - -e 's,[@]PYTHON[@],$(PYTHON),g' \
> > + -e 's,[@]PYTHON3[@],$(PYTHON3),g' \
> > -e 's,[@]OVN_RUNDIR[@],$(OVN_RUNDIR),g' \
> > -e 's,[@]OVSBUILDDIR[@],$(OVSBUILDDIR),g' \
> > -e 's,[@]VERSION[@],$(VERSION),g' \
> > @@ -197,7 +197,7 @@ SUFFIXES += .xml
> > PKIDIR='$(PKIDIR)' \
> > LOGDIR='$(LOGDIR)' \
> > DBDIR='$(DBDIR)' \
> > - PYTHON='$(PYTHON)' \
> > + PYTHON3='$(PYTHON3)' \
> > RUNDIR='$(RUNDIR)' \
> > OVN_RUNDIR='$(OVN_RUNDIR)' \
> > VERSION='$(VERSION)' \
> > @@ -425,7 +425,7 @@ CLEANFILES += flake8-check
> >
> > include $(srcdir)/manpages.mk
> > $(srcdir)/manpages.mk: $(MAN_ROOTS) build-aux/sodepends.py
> > $(OVS_SRCDIR)/python/build/soutil.py
> > -
> > @PYTHONPATH=$(OVS_SRCDIR)/python$(psep)$$PYTHONPATH$(psep)$(srcdir)/python
> > $(PYTHON) $(srcdir)/build-aux/sodepends.py -I. -I$(srcdir) -I$(OVS_MANDIR)
> > $(MAN_ROOTS) >$(@F).tmp
> > +
> > @PYTHONPATH=$(OVS_SRCDIR)/python$(psep)$$PYTHONPATH$(psep)$(srcdir)/python
> > $(PYTHON3) $(srcdir)/build-aux/sodepends.py -I. -I$(srcdir) -I$(OVS_MANDIR)
> > $(MAN_ROOTS) >$(@F).tmp
> > @if cmp -s $(@F).tmp $@; then \
> > touch $@; \
> > rm -f $(@F).tmp; \
> > diff --git a/automake.mk b/automake.mk
> > index ad801f1e5..591e00751 100644
> > --- a/automake.mk
> > +++ b/automake.mk
> > @@ -6,19 +6,17 @@ CLEANFILES += ovn-architecture.7
> > #
> > # If "python" or "dot" is not available, then we do not add graphical
> > diagram
> > # to the documentation.
> > -if HAVE_PYTHON
> > if HAVE_DOT
> > OVSDB_DOT = $(run_python) ${OVSDIR}/ovsdb/ovsdb-dot.in
> > ovn-nb.gv: ${OVSDIR}/ovsdb/ovsdb-dot.in $(srcdir)/ovn-nb.ovsschema
> > $(AM_V_GEN)$(OVSDB_DOT) --no-arrows $(srcdir)/ovn-nb.ovsschema > $@
> > ovn-nb.pic: ovn-nb.gv ${OVSDIR}/ovsdb/dot2pic
> > - $(AM_V_GEN)(dot -T plain < ovn-nb.gv | $(PYTHON)
> > ${OVSDIR}/ovsdb/dot2pic -f 3) > $@.tmp && \
> > + $(AM_V_GEN)(dot -T plain < ovn-nb.gv | $(PYTHON3)
> > ${OVSDIR}/ovsdb/dot2pic -f 3) > $@.tmp && \
> > mv $@.tmp $@
> > OVN_NB_PIC = ovn-nb.pic
> > OVN_NB_DOT_DIAGRAM_ARG = --er-diagram=$(OVN_NB_PIC)
> > CLEANFILES += ovn-nb.gv ovn-nb.pic
> > endif
> > -endif
> >
> > # OVN northbound schema documentation
> > EXTRA_DIST += ovn-nb.xml
> > @@ -39,18 +37,16 @@ ovn-nb.5: \
> > #
> > # If "python" or "dot" is not available, then we do not add graphical
> > diagram
> > # to the documentation.
> > -if HAVE_PYTHON
> > if HAVE_DOT
> > ovn-sb.gv: ${OVSDIR}/ovsdb/ovsdb-dot.in $(srcdir)/ovn-sb.ovsschema
> > $(AM_V_GEN)$(OVSDB_DOT) --no-arrows $(srcdir)/ovn-sb.ovsschema > $@
> > ovn-sb.pic: ovn-sb.gv ${OVSDIR}/ovsdb/dot2pic
> > - $(AM_V_GEN)(dot -T plain < ovn-sb.gv | $(PYTHON)
> > ${OVSDIR}/ovsdb/dot2pic -f 3) > $@.tmp && \
> > + $(AM_V_GEN)(dot -T plain < ovn-sb.gv | $(PYTHON3)
> > ${OVSDIR}/ovsdb/dot2pic -f 3) > $@.tmp && \
> > mv $@.tmp $@
> > OVN_SB_PIC = ovn-sb.pic
> > OVN_SB_DOT_DIAGRAM_ARG = --er-diagram=$(OVN_SB_PIC)
> > CLEANFILES += ovn-sb.gv ovn-sb.pic
> > endif
> > -endif
> >
> > # OVN southbound schema documentation
> > EXTRA_DIST += ovn-sb.xml
> > diff --git a/build-aux/dpdkstrip.py b/build-aux/dpdkstrip.py
> > index 48c7f0693..b8b8ba9c8 100755
> > --- a/build-aux/dpdkstrip.py
> > +++ b/build-aux/dpdkstrip.py
> > @@ -1,4 +1,4 @@
> > -#! /usr/bin/env python
> > +#! /usr/bin/env python3
> > # Copyright (c) 2017 Red Hat, Inc.
> > #
> > # Licensed under the Apache License, Version 2.0 (the "License");
> > diff --git a/build-aux/sodepends.py b/build-aux/sodepends.py
> > index 90cfaa0f7..45812bcbd 100755
> > --- a/build-aux/sodepends.py
> > +++ b/build-aux/sodepends.py
> > @@ -1,4 +1,4 @@
> > -#! /usr/bin/env python
> > +#! /usr/bin/env python3
> >
> > # Copyright (c) 2008, 2011, 2017 Nicira, Inc.
> > #
> > diff --git a/build-aux/soexpand.py b/build-aux/soexpand.py
> > index 53ca64073..00adcf47a 100755
> > --- a/build-aux/soexpand.py
> > +++ b/build-aux/soexpand.py
> > @@ -1,4 +1,4 @@
> > -#! /usr/bin/env python
> > +#! /usr/bin/env python3
> >
> > # Copyright (c) 2008, 2017 Nicira, Inc.
> > #
> > diff --git a/configure.ac b/configure.ac
> > index 78498181c..9b29cbfe4 100644
> > --- a/configure.ac
> > +++ b/configure.ac
> > @@ -89,9 +89,7 @@ OVN_CHECK_COVERAGE
> > OVS_CHECK_NDEBUG
> > OVS_CHECK_OPENSSL
> > OVN_CHECK_LOGDIR
> > -OVN_CHECK_PYTHON2
> > OVN_CHECK_PYTHON3
> > -OVN_CHECK_PYTHON
> > OVN_CHECK_FLAKE8
> > OVN_CHECK_SPHINX
> > OVN_CHECK_DOT
> > diff --git a/ipsec/ovs-monitor-ipsec.in b/ipsec/ovs-monitor-ipsec.in
> > index 4710be039..37e370324 100755
> > --- a/ipsec/ovs-monitor-ipsec.in
> > +++ b/ipsec/ovs-monitor-ipsec.in
> > @@ -1,4 +1,4 @@
> > -#! @PYTHON@
> > +#! @PYTHON3@
> > # Copyright (c) 2017 Nicira, Inc.
> > #
> > # Licensed under the Apache License, Version 2.0 (the "License");
> > diff --git a/m4/ovn.m4 b/m4/ovn.m4
> > index 277468f7f..dacfabb2a 100644
> > --- a/m4/ovn.m4
> > +++ b/m4/ovn.m4
> > @@ -300,57 +300,16 @@ dnl Checks for valgrind/valgrind.h.
> > AC_DEFUN([OVN_CHECK_VALGRIND],
> > [AC_CHECK_HEADERS([valgrind/valgrind.h])])
> >
> > -dnl Checks for Python 2.x, x >= 7.
> > -AC_DEFUN([OVN_CHECK_PYTHON2],
> > - [AC_CACHE_CHECK(
> > - [for Python 2.x for x >= 7],
> > - [ovs_cv_python2],
> > - [if test -n "$PYTHON2"; then
> > - ovs_cv_python2=$PYTHON2
> > - else
> > - ovs_cv_python2=no
> > - for binary in python2 python2.7 python; do
> > - ovs_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> > - for dir in $PATH; do
> > - IFS=$ovs_save_IFS
> > - test -z "$dir" && dir=.
> > - if test -x "$dir"/"$binary" && "$dir"/"$binary" -c 'import sys
> > -if sys.hexversion >= 0x02070000 and sys.hexversion < 0x03000000:
> > - sys.exit(0)
> > -else:
> > - sys.exit(1)'; then
> > - ovs_cv_python2=$dir/$binary
> > - break 2
> > - fi
> > - done
> > - done
> > - if test "$ovs_cv_python2" != no && test -x "$ovs_cv_python2"; then
> > - if ! "$ovs_cv_python2" -c 'import six ; six.moves.range'
> > >&AS_MESSAGE_LOG_FD 2>&1; then
> > - ovs_cv_python2=no
> > - AC_MSG_WARN([Missing Python six library or version too old.])
> > - fi
> > - fi
> > - fi])
> > - AC_SUBST([HAVE_PYTHON2])
> > - AM_MISSING_PROG([PYTHON2], [python2])
> > - if test "$ovs_cv_python2" != no; then
> > - PYTHON2=$ovs_cv_python2
> > - HAVE_PYTHON2=yes
> > - else
> > - HAVE_PYTHON2=no
> > - fi
> > - AM_CONDITIONAL([HAVE_PYTHON2], [test "$HAVE_PYTHON2" = yes])])
> > -
> > -dnl Checks for Python 3.x, x >= 4.
> > +dnl Checks for Python 3.4 or later.
> > AC_DEFUN([OVN_CHECK_PYTHON3],
> > [AC_CACHE_CHECK(
> > - [for Python 3.x for x >= 4],
> > + [for Python 3 (version 3.4 or later)],
> > [ovs_cv_python3],
> > [if test -n "$PYTHON3"; then
> > ovs_cv_python3=$PYTHON3
> > else
> > ovs_cv_python3=no
> > - for binary in python3 python3.4; do
> > + for binary in python3 python3.4 python3.5 python3.6 python3.7; do
> > ovs_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> > for dir in $PATH; do
> > IFS=$ovs_save_IFS
> > @@ -365,46 +324,12 @@ else:
> > fi
> > done
> > done
> > - if test "$ovs_cv_python3" != no; then
> > - if test -x "$ovs_cv_python3" && ! "$ovs_cv_python3" -c 'import
> > six' >/dev/null 2>&1; then
> > - ovs_cv_python3=no
> > - AC_MSG_WARN([Missing Python six library.])
> > - fi
> > - fi
> > fi])
> > - AC_SUBST([HAVE_PYTHON3])
> > - AM_MISSING_PROG([PYTHON3], [python3])
> > - if test "$ovs_cv_python3" != no; then
> > - PYTHON3=$ovs_cv_python3
> > - HAVE_PYTHON3=yes
> > - else
> > - HAVE_PYTHON3=no
> > + if test "$ovs_cv_python3" = no; then
> > + AC_MSG_ERROR([Python 3.4 or later is required but not found in $PATH,
> > please install it or set $PYTHON3 to point to it])
> > fi
> > - AM_CONDITIONAL([HAVE_PYTHON3], [test "$HAVE_PYTHON3" = yes])])
> > -
> > -dnl Checks if you have any compatible Python version installed.
> > -dnl Python 2.7+ has the preference to 3.4+
> > -AC_DEFUN([OVN_CHECK_PYTHON],
> > - [AC_CACHE_CHECK(
> > - [for Python 2 or 3],
> > - [ovs_cv_python],
> > - [if test -n "$PYTHON"; then
> > - ovs_cv_python=$PYTHON
> > - else
> > - ovs_cv_python=no
> > - if test "$ovs_cv_python2" != no; then
> > - ovs_cv_python=$ovs_cv_python2
> > - elif test "$ovs_cv_python3" != no; then
> > - ovs_cv_python=$ovs_cv_python3
> > - else
> > - AC_MSG_ERROR([Missing Python.])
> > - fi
> > - fi])
> > - AC_SUBST([PYTHON])
> > - PYTHON=$ovs_cv_python
> > - AC_SUBST([HAVE_PYTHON])
> > - HAVE_PYTHON=yes
> > - AM_CONDITIONAL([HAVE_PYTHON], [test "$HAVE_PYTHON" = yes])])
> > + AC_ARG_VAR([PYTHON3])
> > + PYTHON3=$ovs_cv_python3])
> >
> > dnl Checks for flake8.
> > AC_DEFUN([OVN_CHECK_FLAKE8],
> > diff --git a/rhel/ovn-fedora.spec.in b/rhel/ovn-fedora.spec.in
> > index 447b4fe6e..acde99793 100644
> > --- a/rhel/ovn-fedora.spec.in
> > +++ b/rhel/ovn-fedora.spec.in
> > @@ -16,11 +16,6 @@
> > # as regular user, specify the '--without libcapng'
> > %bcond_without libcapng
> >
> > -# Enable Python 3 by specifying '--with build_python3'.
> > -# This is enabled by default for versions of the distribution that
> > -# have Python 3 by default (Fedora > 22).
> > -%bcond_with build_python3
> > -
> > # Enable PIE, bz#955181
> > %global _hardened_build 1
> >
> > @@ -30,16 +25,6 @@
> > %define _rundir /run
> > %endif
> >
> > -# define the python package prefix based on distribution version so that
> > we can
> > -# simultaneously support RHEL-based and later Fedora versions in this spec
> > file.
> > -%if 0%{?fedora} >= 25
> > -%define _py2 python2
> > -%endif
> > -
> > -%if 0%{?rhel} || 0%{?fedora} < 25
> > -%define _py2 python
> > -%endif
> > -
> > Name: ovn
> > Summary: Open Virtual Network support
> > Group: System Environment/Daemons
> > @@ -61,16 +46,12 @@ Source10:
> > http://openvswitch.org/releases/openvswitch-%{ovsver}.tar.gz
> > BuildRequires: gcc gcc-c++
> > BuildRequires: autoconf automake libtool
> > BuildRequires: systemd-units openssl openssl-devel
> > -BuildRequires: %{_py2}-devel
> > -%if 0%{?fedora} > 22 || %{with build_python3}
> > BuildRequires: python3-devel
> > -%endif
> > BuildRequires: desktop-file-utils
> > BuildRequires: groff graphviz
> > BuildRequires: checkpolicy, selinux-policy-devel
> > BuildRequires: /usr/bin/sphinx-build
> > # make check dependencies
> > -BuildRequires: %{_py2}-twisted%{?rhel:-core} %{_py2}-zope-interface
> > %{_py2}-six
> > BuildRequires: procps-ng
> > %if %{with libcapng}
> > BuildRequires: libcap-ng libcap-ng-devel
> > @@ -127,7 +108,7 @@ OVN vtep controller
> > %package docker
> > Summary: Open Virtual Network support
> > License: ASL 2.0
> > -Requires: ovn %{_py2}-openvswitch
> > +Requires: ovn python3-openvswitch
> > Obsoletes: openvswitch-ovn-docker
> > Provides: openvswitch-ovn-docker =
> > %{?epoch:%{epoch}:}%{version}-%{release}
> >
> > @@ -153,12 +134,7 @@ cd openvswitch-%{ovsver}
> > %endif
> > --enable-ssl \
> > --with-pkidir=%{_sharedstatedir}/openvswitch/pki \
> > -%if 0%{?fedora} > 22 || %{with build_python3}
> > - PYTHON3=%{__python3} \
> > - PYTHON=%{__python2}
> > -%else
> > - PYTHON=%{__python}
> > -%endif
> > + PYTHON3=%{__python3}
> >
> > make %{?_smp_mflags}
> > cd -
> > @@ -173,12 +149,7 @@ cd -
> > %endif
> > --enable-ssl \
> > --with-pkidir=%{_sharedstatedir}/openvswitch/pki \
> > -%if 0%{?fedora} > 22 || %{with build_python3}
> > - PYTHON3=%{__python3} \
> > - PYTHON=%{__python2}
> > -%else
> > - PYTHON=%{__python}
> > -%endif
> > + PYTHON3=%{__python3}
> >
> > make %{?_smp_mflags}
> >
> > diff --git a/tests/atlocal.in b/tests/atlocal.in
> > index f79473583..6976518ce 100644
> > --- a/tests/atlocal.in
> > +++ b/tests/atlocal.in
> > @@ -1,23 +1,13 @@
> > # -*- shell-script -*-
> > HAVE_OPENSSL='@HAVE_OPENSSL@'
> > OPENSSL_SUPPORTS_SNI='@OPENSSL_SUPPORTS_SNI@'
> > -HAVE_PYTHON='@HAVE_PYTHON@'
> > -HAVE_PYTHON2='@HAVE_PYTHON2@'
> > HAVE_PYTHON3='@HAVE_PYTHON3@'
> > HAVE_UNBOUND='@HAVE_UNBOUND@'
> > EGREP='@EGREP@'
> >
> > -if test x"$PYTHON" = x; then
> > - PYTHON='@PYTHON@'
> > -fi
> > -
> > -if test x"$PYTHON2" = x; then
> > - PYTHON2='@PYTHON2@'
> > -fi
> > -
> > if test x"$PYTHON3" = x; then
> > PYTHON3='@PYTHON3@'
> > -
> > + PYTHON='@PYTHON3@'
> > # PYTHONCOERCECLOCALE=0 disables the Unicode compatibility warning on
> > # stderr that breaks almost any Python3 test (PEP 0538)
> > PYTHONCOERCECLOCALE=0
> > @@ -149,8 +139,8 @@ find_l7_lib()
> > {
> > set +x
> > var=HAVE_`echo "$1" | tr '[a-z]' '[A-Z]'`
> > - if test "$HAVE_PYTHON" = "yes"; then
> > - result=$($PYTHON $abs_top_srcdir/tests/test-l7.py --help | grep
> > "$1")
> > + if test "$HAVE_PYTHON3" = "yes"; then
> > + result=$($PYTHON3 $abs_top_srcdir/tests/test-l7.py --help | grep
> > "$1")
> > if test "x${result}" != x; then
> > eval ${var}="yes"
> > else
> > diff --git a/tests/checkpatch.at b/tests/checkpatch.at
> > index fe21acdf2..caf772884 100755
> > --- a/tests/checkpatch.at
> > +++ b/tests/checkpatch.at
> > @@ -6,7 +6,6 @@ OVS_START_SHELL_HELPERS
> > # Runs checkpatch under Python 2 and Python 3, if installed, on the given
> > # PATCH, expecting the specified set of ERRORS (and warnings).
> > try_checkpatch() {
> > - AT_SKIP_IF([test $HAVE_PYTHON2 = no && test $HAVE_PYTHON3 = no])
> > # Take the patch to test from $1. Remove an initial four-space indent
> > # from it and, if it is just headers with no body, add a null body.
> > echo "$1" | sed 's/^ //' > test.patch
> > @@ -22,7 +21,6 @@ try_checkpatch() {
> > : > expout
> > fi
> >
> > - try_checkpatch__ "$HAVE_PYTHON2" "$PYTHON2"
> > try_checkpatch__ "$HAVE_PYTHON3" "$PYTHON3"
> > }
> > try_checkpatch__() {
> > diff --git a/tests/ovn-controller-vtep.at b/tests/ovn-controller-vtep.at
> > index d4744d76e..3092dd5ca 100644
> > --- a/tests/ovn-controller-vtep.at
> > +++ b/tests/ovn-controller-vtep.at
> > @@ -15,7 +15,6 @@ m4_define([OVN_CONTROLLER_VTEP_START],
> > [
> > AT_KEYWORDS([ovn])
> > # this will cause skip when 'make check' using Windows setup.
> > - AT_SKIP_IF([test $HAVE_PYTHON = no])
> >
> > dnl Create databases (ovn-nb, ovn-sb, vtep).
> > AT_CHECK([ovsdb-tool create vswitchd.db
> > $ovs_srcdir/vswitchd/vswitch.ovsschema])
> > diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at
> > index 989ed4f47..12597d3ad 100644
> > --- a/tests/ovn-northd.at
> > +++ b/tests/ovn-northd.at
> > @@ -1,6 +1,5 @@
> > AT_BANNER([OVN northd])
> > AT_SETUP([ovn -- check from NBDB to SBDB])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl create Logical_Router name=R1
> > @@ -151,7 +150,6 @@ AT_CHECK([ovn-sbctl list ha_chassis_group | wc -l],
> > [0], [0
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- check Gateway_Chassis propagation from NBDB to SBDB
> > backwards compatibility])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl create Logical_Router name=R1
> > @@ -200,7 +198,6 @@ AT_CHECK([ovn-sbctl list ha_chassis_group | wc -l],
> > [0], [0
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- check up state of VIF LSP])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl ls-add S1
> > @@ -214,7 +211,6 @@ AT_CHECK([test x`ovn-nbctl lsp-get-up S1-vm1` = xup])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- check up state of router LSP linked to a distributed LR])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl lr-add R1
> > @@ -230,7 +226,6 @@ AT_CHECK([test x`ovn-nbctl lsp-get-up S1-R1` = xup])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- check up state of router LSP linked to a gateway LR])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-sbctl chassis-add gw1 geneve 127.0.0.1
> > @@ -250,7 +245,6 @@ AT_CHECK([test x`ovn-nbctl lsp-get-up S1-R1` = xup])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- check up state of router LSP linked to an LRP with set
> > Gateway Chassis])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-sbctl chassis-add gw1 geneve 127.0.0.1
> > @@ -418,7 +412,6 @@ OVS_APP_EXIT_AND_WAIT([ovn-northd])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- check HA_Chassis_Group propagation from NBDB to SBDB])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl --wait=sb ha-chassis-group-add hagrp1
> > @@ -900,7 +893,6 @@ OVS_APP_EXIT_AND_WAIT([ovn-northd])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- ovn-northd pause and resume])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > AT_CHECK([test xfalse = x`as northd ovs-appctl -t ovn-northd is-paused`])
> > @@ -938,7 +930,6 @@ OVS_WAIT_UNTIL([
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- check Redirect Chassis propagation from NB to SB])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-sbctl chassis-add gw1 geneve 127.0.0.1
> > @@ -968,7 +959,6 @@ OVS_WAIT_UNTIL([ovn-sbctl get Port_Binding ${uuid}
> > options:redirect-type], [0],
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- check stateless dnat_and_snat rule])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-sbctl chassis-add gw1 geneve 127.0.0.1
> > diff --git a/tests/ovn.at b/tests/ovn.at
> > index 5fc2de2d3..efa89849e 100644
> > --- a/tests/ovn.at
> > +++ b/tests/ovn.at
> > @@ -1490,7 +1490,6 @@ AT_BANNER([OVN end-to-end tests])
> > # 3 hypervisors, one logical switch, 3 logical ports per hypervisor
> > AT_SETUP([ovn -- 3 HVs, 1 LS, 3 lports/HV])
> > AT_KEYWORDS([ovnarp])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Create hypervisors hv[123].
> > @@ -1785,7 +1784,6 @@ AT_CLEANUP
> > # logical ports bound to chassis encap-ip.
> > AT_SETUP([ovn -- 2 HVs, 1 LS, 2 lports/HV])
> > AT_KEYWORDS([ovnarp])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Create hypervisors hv[12].
> > @@ -1962,7 +1960,6 @@ OVN_CLEANUP([hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- trace 1 LS, 3 LSPs])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Create a logical switch and some logical ports.
> > @@ -2185,7 +2182,6 @@ AT_CLEANUP
> > # 2 locally attached networks (one flat, one vlan tagged over same device)
> > # 2 ports per HV on each network
> > AT_SETUP([ovn -- 2 HVs, 4 lports/HV, localnet ports])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # In this test cases we create 3 switches, all connected to same
> > @@ -2379,7 +2375,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- vtep: 3 HVs, 1 VIFs/HV, 1 GW, 1 LS])
> > AT_KEYWORDS([vtep])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Configure the Northbound database
> > @@ -2581,7 +2576,6 @@ AT_CLEANUP
> >
> > # Similar test to "hardware GW"
> > AT_SETUP([ovn -- 3 HVs, 1 VIFs/HV, 1 software GW, 1 LS])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Configure the Northbound database
> > @@ -2730,7 +2724,6 @@ AT_CLEANUP
> >
> > # 3 hypervisors, 3 logical switches with 3 logical ports each, 1 logical
> > router
> > AT_SETUP([ovn -- 3 HVs, 3 LS, 3 lports/LS, 1 LR])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -3139,7 +3132,6 @@ OVN_CLEANUP([hv1], [hv2], [hv3])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- IP relocation using GARP request])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -3342,7 +3334,6 @@ AT_CLEANUP
> >
> > # 3 hypervisors, one logical switch, 3 logical ports per hypervisor
> > AT_SETUP([ovn -- portsecurity : 3 HVs, 1 LS, 3 lports/HV])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Create hypervisors hv[123].
> > @@ -3719,7 +3710,6 @@ OVN_CLEANUP([hv1],[hv2],[hv3])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 2 HVs, 2 LS, 1 lport/LS, 2 peer LRs])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -3866,7 +3856,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- 1 HV, 1 LS, 2 lport/LS, 1 LR])
> > AT_KEYWORDS([router-admin-state])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -3978,7 +3967,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- 1 HV, 2 LSs, 1 lport/LS, 1 LR])
> > AT_KEYWORDS([router-admin-state])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -4093,7 +4081,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 2 HVs, 3 LS, 1 lport/LS, 2 peer LRs, static routes])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -4246,7 +4233,6 @@ OVN_CLEANUP([hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- send gratuitous arp on localnet])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> > ovn-nbctl ls-add lsw0
> > net_add n1
> > @@ -4300,7 +4286,6 @@ OVN_CLEANUP([hv])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 2 HVs, 3 LRs connected via LS, static routes])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -4477,7 +4462,6 @@ OVN_CLEANUP([hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- dhcpv4 : 1 HV, 2 LS, 2 LSPs/LS])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl ls-add ls1
> > @@ -4910,7 +4894,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- dhcpv6 : 1 HV, 2 LS, 5 LSPs])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl ls-add ls1
> > @@ -5182,7 +5165,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 2 HVs, 2 LRs connected via LS, gateway router])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -5359,7 +5341,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- icmp_reply: 1 HVs, 2 LSs, 1 lport/LS, 1 LR])
> > AT_KEYWORDS([router-icmp-reply])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -5505,7 +5486,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- policy-based routing: 1 HVs, 2 LSs, 1 lport/LS, 1 LR])
> > AT_KEYWORDS([policy-based-routing])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -5691,7 +5671,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- policy-based routing IPv6: 1 HVs, 3 LSs, 1 lport/LS, 1
> > LR])
> > AT_KEYWORDS([policy-based-routing])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -5968,7 +5947,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- nd_na ])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > #TODO: since patch port for IPv6 logical router port is not ready not,
> > @@ -6067,7 +6045,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- ipam])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Add a port to a switch that does not have a subnet set, then set the
> > @@ -6479,7 +6456,6 @@ OVS_APP_EXIT_AND_WAIT([ovn-northd])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- ipam connectivity])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl lr-add R1
> > @@ -6609,7 +6585,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- ovs-vswitchd restart])
> > AT_KEYWORDS([vswitchd])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl ls-add ls1
> > @@ -6703,7 +6678,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- send arp for nexthop])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Topology: Two LSs - ls1 and ls2 are connected via router r0
> > @@ -6813,7 +6787,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- send gratuitous arp for nat ips in localnet])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> > # Create logical switch
> > ovn-nbctl ls-add ls0
> > @@ -6865,7 +6838,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- send gratuitous arp with nat-addresses router in
> > localnet])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> > # Create logical switch
> > ovn-nbctl ls-add ls0
> > @@ -6963,7 +6935,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- conntrack zone allocation])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -7517,7 +7488,6 @@ OVN_CLEANUP([hv])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- read-only sb db:ptcp access])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> >
> > : > .$1.db.~lock~
> > ovsdb-tool create ovn-sb.db "$abs_top_srcdir"/ovn-sb.ovsschema
> > @@ -7553,7 +7523,6 @@ OVS_APP_EXIT_AND_WAIT([ovsdb-server])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- read-only sb db:pssl access])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > AT_SKIP_IF([test "$HAVE_OPENSSL" = no])
> > PKIDIR="$(cd $abs_top_builddir/tests && pwd)"
> > AT_SKIP_IF([expr "$PKIDIR" : ".*[ '\"
> > @@ -7610,7 +7579,6 @@ OVS_APP_EXIT_AND_WAIT([ovsdb-server])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- nb connection/ssl commands])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > AT_SKIP_IF([test "$HAVE_OPENSSL" = no])
> > PKIDIR="$(cd $abs_top_builddir/tests && pwd)"
> > AT_SKIP_IF([expr "$PKIDIR" : ".*[ '\"
> > @@ -7662,7 +7630,6 @@ OVS_APP_EXIT_AND_WAIT([ovsdb-server])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- sb connection/ssl commands])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > AT_SKIP_IF([test "$HAVE_OPENSSL" = no])
> > PKIDIR="$(cd $abs_top_builddir/tests && pwd)"
> > AT_SKIP_IF([expr "$PKIDIR" : ".*[ '\"
> > @@ -7919,7 +7886,6 @@ OVN_CLEANUP([hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 3 HVs, 3 LRs connected via LS, source IP based routes])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -8120,7 +8086,6 @@ OVN_CLEANUP([hv1],[hv2],[hv3])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- dns lookup : 1 HV, 2 LS, 2 LSPs/LS])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl ls-add ls1
> > @@ -8534,7 +8499,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 4 HV, 1 LS, 1 LR, packet test with HA distributed router
> > gateway port])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > net_add n1
> > @@ -8761,7 +8725,6 @@ OVN_CLEANUP([hv1],[gw1],[ext1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 4 HV, 3 LS, 2 LR, packet test with HA distributed router
> > gateway port])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > net_add n1
> > @@ -8980,7 +8943,6 @@ OVN_CLEANUP([hv1],[gw1],[gw2],[ext1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 1 LR with distributed router gateway port])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -9308,7 +9270,6 @@ OVN_CLEANUP([hv1],[hv2],[hv3])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- send gratuitous arp for NAT rules on distributed router])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> > # Create logical switches
> > ovn-nbctl ls-add ls0
> > @@ -9450,7 +9411,6 @@ AT_CLEANUP
> > # gateway port should use vlans(i.e input network vlan tag) across
> > hypervisors
> > # instead of tunneling.
> > AT_SETUP([ovn -- vlan traffic for external network with distributed
> > router gateway port])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -9769,7 +9729,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- IPv6 ND Router Solicitation responder])
> > AT_KEYWORDS([ovn-nd_ra])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # In this test case we create 1 lswitch with 3 VIF ports attached,
> > @@ -10017,7 +9976,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- /32 router IP address])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -10115,7 +10073,6 @@ OVN_CLEANUP([hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 2 HVs, 1 lport/HV, localport ports])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl ls-add ls1
> > @@ -10237,7 +10194,6 @@ OVN_CLEANUP([hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- 1 LR with HA distributed router gateway port])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > net_add n1
> > @@ -10792,7 +10748,6 @@ OVN_CLEANUP([gw1],[gw2],[hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- send gratuitous ARP for NAT rules on HA distributed
> > router])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> > ovn-nbctl ls-add ls0
> > ovn-nbctl ls-add ls1
> > @@ -10963,7 +10918,6 @@ OVN_CLEANUP([hv1],[hv2],[hv3])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- ensure one gw controller restart in HA doesn't bounce
> > the master])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > net_add n1
> > @@ -11060,7 +11014,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- IPv6 Neighbor Solicitation for unknown MAC])
> > AT_KEYWORDS([ovn-nd_ns for unknown mac])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl ls-add sw0_ip6
> > @@ -11523,7 +11476,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- ACL reject rule test])
> > AT_KEYWORDS([acl-reject])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # test_ip_packet INPORT HV ETH_SRC ETH_DST IPV4_SRC IPV4_DST IP_CHKSUM
> > EXP_IP_CHKSUM EXP_ICMP_CHKSUM
> > @@ -11665,7 +11617,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- Port Groups])
> > AT_KEYWORDS([ovnpg])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -11891,7 +11842,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- ACLs on Port Groups])
> > AT_KEYWORDS([ovnpg_acl])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -12377,7 +12327,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- TTL exceeded])
> > AT_KEYWORDS([ttl-exceeded])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # test_ip_packet INPORT HV ETH_SRC ETH_DST IPV4_SRC IPV4_DST IPV4_ROUTER
> > IP_CHKSUM EXP_IP_CHKSUM EXP_ICMP_CHKSUM
> > @@ -12474,7 +12423,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- router port unreachable])
> > AT_KEYWORDS([router-port-unreachable])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # test_ip_packet INPORT HV ETH_SRC ETH_DST IPV4_SRC IPV4_ROUTER
> > L4_PROTCOL IP_CHKSUM EXP_IP_CHKSUM EXP_ICMP_CHKSUM EXP_ICMP_CODE
> > @@ -12623,7 +12571,6 @@ OVN_CLEANUP([hv1], [hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- ovn-controller exit])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> > # Logical network:
> > # One Logical Router: ro, with two logical switches sw1 and sw2.
> > @@ -12714,7 +12661,6 @@ OVN_CLEANUP([hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- external logical port])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > net_add n1
> > @@ -13450,7 +13396,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- Address Set Incremental Processing])
> > AT_KEYWORDS([ovn_as_inc])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > net_add n1
> > @@ -13524,7 +13469,6 @@ OVN_CLEANUP([hv1])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- ovn-controller restart])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -13677,7 +13621,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- router - check packet length - icmp defrag])
> > AT_KEYWORDS([check packet length])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > ovn-nbctl ls-add sw0
> > @@ -13852,7 +13795,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- IP packet buffering])
> > AT_KEYWORDS([ip-buffering])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -13997,7 +13939,6 @@ OVN_CLEANUP([hv1],[hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- neighbor update on same HV])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -14507,7 +14448,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- virtual ports])
> > AT_KEYWORDS([virtual ports])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > send_garp() {
> > @@ -14932,7 +14872,6 @@ OVN_CLEANUP([hv1], [hv2])
> > AT_CLEANUP
> >
> > AT_SETUP([ovn -- IGMP snoop/querier/relay])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > # Logical network:
> > @@ -16112,7 +16051,6 @@ AT_CLEANUP
> >
> > AT_SETUP([ovn -- ARP lookup before learning])
> > AT_KEYWORDS([virtual ports])
> > -AT_SKIP_IF([test $HAVE_PYTHON = no])
> > ovn_start
> >
> > send_garp() {
> > diff --git a/tests/ovsdb-macros.at b/tests/ovsdb-macros.at
> > index 83e3df750..7664a53cd 100644
> > --- a/tests/ovsdb-macros.at
> > +++ b/tests/ovsdb-macros.at
> > @@ -38,7 +38,6 @@ m4_define([OVSDB_CHECK_POSITIVE],
> > # TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
> > m4_define([OVSDB_CHECK_POSITIVE_PY],
> > [AT_SETUP([$1])
> > - AT_SKIP_IF([test $HAVE_PYTHON2 = no])
> > $6
> > AT_KEYWORDS([ovsdb positive Python $4])
> > AT_CHECK([$PYTHON2 $srcdir/test-ovsdb.py $2], [0], [$3
> > @@ -57,7 +56,6 @@ m4_define([OVSDB_CHECK_POSITIVE_PY],
> > # TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
> > m4_define([OVSDB_CHECK_POSITIVE_PY3],
> > [AT_SETUP([$1])
> > - AT_SKIP_IF([test $HAVE_PYTHON3 = no])
> > $6
> > AT_KEYWORDS([ovsdb positive Python $4])
> > AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py $2], [0], [$3
> > @@ -100,7 +98,6 @@ m4_define([OVSDB_CHECK_NEGATIVE],
> > # TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
> > m4_define([OVSDB_CHECK_NEGATIVE_PY],
> > [AT_SETUP([$1])
> > - AT_SKIP_IF([test $HAVE_PYTHON2 = no])
> > AT_KEYWORDS([ovsdb negative $4])
> > AT_CHECK([$PYTHON2 $srcdir/test-ovsdb.py $2], [1], [], [stderr])
> > m4_assert(m4_len([$3]))
> > @@ -121,7 +118,6 @@ m4_define([OVSDB_CHECK_NEGATIVE_PY],
> > # TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
> > m4_define([OVSDB_CHECK_NEGATIVE_PY],
> > [AT_SETUP([$1])
> > - AT_SKIP_IF([test $HAVE_PYTHON3 = no])
> > AT_KEYWORDS([ovsdb negative $4])
> > AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py $2], [1], [], [stderr])
> > m4_assert(m4_len([$3]))
> > diff --git a/tests/system-kmod-macros.at b/tests/system-kmod-macros.at
> > index 48e94642b..f494af5f5 100644
> > --- a/tests/system-kmod-macros.at
> > +++ b/tests/system-kmod-macros.at
> > @@ -59,7 +59,6 @@ m4_define([CONFIGURE_VETH_OFFLOADS],
> > # kernel conntrack tables when the test is finished.
> > #
> > m4_define([CHECK_CONNTRACK],
> > - [AT_SKIP_IF([test $HAVE_PYTHON = no])
> > m4_foreach([mod], [[nf_conntrack_ipv4], [nf_conntrack_ipv6],
> > [nf_nat_ftp],
> > [nf_nat_tftp]],
> > [modprobe mod || echo "Module mod not loaded."
> > diff --git a/tests/system-userspace-macros.at
> > b/tests/system-userspace-macros.at
> > index 89735bf16..d8cc686c2 100644
> > --- a/tests/system-userspace-macros.at
> > +++ b/tests/system-userspace-macros.at
> > @@ -63,7 +63,6 @@ m4_define([CONFIGURE_VETH_OFFLOADS],
> > # Perform requirements checks for running conntrack tests.
> > #
> > m4_define([CHECK_CONNTRACK],
> > - [AT_SKIP_IF([test $HAVE_PYTHON = no])]
> > )
> >
> > # CHECK_CONNTRACK_ALG()
> > diff --git a/utilities/bugtool/automake.mk b/utilities/bugtool/automake.mk
> > index b8c52d339..69b29e600 100644
> > --- a/utilities/bugtool/automake.mk
> > +++ b/utilities/bugtool/automake.mk
> > @@ -1,4 +1,3 @@
> > -if HAVE_PYTHON2
> > bugtool_plugins = \
> > utilities/bugtool/plugins/network-status/ovn.xml
> >
> > @@ -35,7 +34,6 @@ bugtool-uninstall-local:
> > rm -rf "$(DESTDIR)$(bugtoolpluginsdir)/$$dir"; \
> > fi \
> > done; exit 0
> > -endif
> >
> > EXTRA_DIST += \
> > $(bugtool_plugins) \
> > diff --git a/utilities/ovn-detrace.in b/utilities/ovn-detrace.in
> > index c842adc32..f59544259 100755
> > --- a/utilities/ovn-detrace.in
> > +++ b/utilities/ovn-detrace.in
> > @@ -1,4 +1,4 @@
> > -#! @PYTHON@
> > +#! @PYTHON3@
> > #
> > # Copyright (c) 2017 eBay Inc.
> > #
> > diff --git a/utilities/ovn-docker-overlay-driver.in
> > b/utilities/ovn-docker-overlay-driver.in
> > index 65edfcd9d..f408bbdd8 100755
> > --- a/utilities/ovn-docker-overlay-driver.in
> > +++ b/utilities/ovn-docker-overlay-driver.in
> > @@ -1,4 +1,4 @@
> > -#! @PYTHON@
> > +#! @PYTHON3@
> > # Copyright (C) 2015 Nicira, Inc.
> > #
> > # Licensed under the Apache License, Version 2.0 (the "License");
> > diff --git a/utilities/ovn-docker-underlay-driver.in
> > b/utilities/ovn-docker-underlay-driver.in
> > index d91ce9fca..229418500 100755
> > --- a/utilities/ovn-docker-underlay-driver.in
> > +++ b/utilities/ovn-docker-underlay-driver.in
> > @@ -1,4 +1,4 @@
> > -#! @PYTHON@
> > +#! @PYTHON3@
> > # Copyright (C) 2015 Nicira, Inc.
> > #
> > # Licensed under the Apache License, Version 2.0 (the "License");
> >
>
> _______________________________________________
> dev mailing list
> d...@openvswitch.org
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
>
_______________________________________________
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
