On Fri, Sep 10, 2021 at 06:23:18PM +0200, Frode Nordahl wrote: > On Thu, Sep 9, 2021 at 10:05 PM Flavio Leitner <f...@sysclose.org> wrote: > > > > > > Hi Frode, > > Hello Flavio, thank you for taking the time to review. > > > On Wed, Aug 25, 2021 at 01:05:14PM +0200, Frode Nordahl wrote: > > > RFC 8996 [0] deprecates the use of TLSv1 and TLSv1.1 for security > > > reasons. Update our default list of protcols to be in compliance. > > > > > > Also add TLSv1.3 to the default list of supported protocols. > > > > > > 0: https://datatracker.ietf.org/doc/html/rfc8996 > > > Signed-off-by: Frode Nordahl <frode.nord...@canonical.com> > > > > This patch does two things: > > Deprecate TLSv1 and TLSv1.2 > > Add support for TLSv1.3 > > > > Can we split them into separate logical patches? > > Yes, that makes sense. > > > Also, shouldn't we first warn the users about deprecating > > TLSv1 and TLSv1.1 for a release period, and then remove from > > the default list in the next release? I mean, this is an user > > visible change, so users might need some time to adapt. > > > > What do you think? > > That would indeed be the appropriate thing to do. I guess I felt a bit > of a rush since we are a bit late on this deprecation, but better do > it properly regardless!
Cool, thanks! fbl > > Thanks! > > -- > Frode Nordahl > > > fbl > > > > > --- > > > NEWS | 7 +++++++ > > > lib/ssl-connect.man | 6 ++++-- > > > lib/stream-ssl.c | 35 +++++++++++++++++++++++++++++------ > > > m4/openvswitch.m4 | 16 ++++++++++++++++ > > > tests/ovsdb-server.at | 6 ++---- > > > 5 files changed, 58 insertions(+), 12 deletions(-) > > > > > > diff --git a/NEWS b/NEWS > > > index 1f2adf718..502e6693a 100644 > > > --- a/NEWS > > > +++ b/NEWS > > > @@ -8,6 +8,13 @@ Post-v2.16.0 > > > by default. 'other_config:dpdk-socket-limit' can be set equal to > > > the 'other_config:dpdk-socket-mem' to preserve the legacy memory > > > limiting behavior. > > > + - Update default configuration for enabled TLS protocols: > > > + * RFC 8996 deprecates the use of TLSv1 and TLSv1.1 for security > > > reasons. > > > + * Add TLSv1.3 to the default list of enabled protocols when the > > > built with > > > + OpenSSL v1.1.1 and newer. > > > + * The new default is as such: TLSv1.2,TLSv1.3 > > > + * As a consequence we no longer support building Open vSwitch with > > > OpenSSL > > > + versions without TLSv1.2 support. > > > > > > > > > v2.16.0 - 16 Aug 2021 > > > diff --git a/lib/ssl-connect.man b/lib/ssl-connect.man > > > index 6e54f77ef..0dd5a29be 100644 > > > --- a/lib/ssl-connect.man > > > +++ b/lib/ssl-connect.man > > > @@ -1,10 +1,12 @@ > > > .IP "\fB\-\-ssl\-protocols=\fIprotocols\fR" > > > Specifies, in a comma- or space-delimited list, the SSL protocols > > > \fB\*(PN\fR will enable for SSL connections. Supported > > > -\fIprotocols\fR include \fBTLSv1\fR, \fBTLSv1.1\fR, and \fBTLSv1.2\fR. > > > +\fIprotocols\fR include \fBTLSv1.2\fR and \fBTLSv1.3\fR depending on > > > +which version of OpenSSL Open vSwitch is built with. > > > Regardless of order, the highest protocol supported by both sides will > > > be chosen when making the connection. The default when this option is > > > -omitted is \fBTLSv1,TLSv1.1,TLSv1.2\fR. > > > +omitted is \fBTLSv1.2,TLSv1.3\fR if built with a version of OpenSSL that > > > +supports \fBTLSv1.3\fR. > > > . > > > .IP "\fB\-\-ssl\-ciphers=\fIciphers\fR" > > > Specifies, in OpenSSL cipher string format, the ciphers \fB\*(PN\fR will > > > diff --git a/lib/stream-ssl.c b/lib/stream-ssl.c > > > index 6b4cf6970..954067787 100644 > > > --- a/lib/stream-ssl.c > > > +++ b/lib/stream-ssl.c > > > @@ -162,7 +162,13 @@ struct ssl_config_file { > > > static struct ssl_config_file private_key; > > > static struct ssl_config_file certificate; > > > static struct ssl_config_file ca_cert; > > > -static char *default_ssl_protocols = "TLSv1,TLSv1.1,TLSv1.2"; > > > +/* RFC 8996 deprecates the use of TLSv1 and TLSv1.1, users may still > > > specify > > > + * them in their configuration, but our defaults are in compliance. */ > > > +#if OPENSSL_VERSION_NUMBER < 0x10101000L > > > +static char *default_ssl_protocols = "TLSv1.2"; > > > +#else > > > +static char *default_ssl_protocols = "TLSv1.2,TLSv1.3"; > > > +#endif /* OPENSSL_VERSION_NUMBER < 0x10101000L */ > > > static char *default_ssl_ciphers = "HIGH:!aNULL:!MD5"; > > > static char *ssl_protocols = NULL; > > > static char *ssl_ciphers = NULL; > > > @@ -1255,9 +1261,18 @@ stream_ssl_set_protocols(const char *arg) > > > return; > > > } > > > > > > + /* TODO: Using SSL_CTX_set_options to enable individual protocol > > > versions > > > + * is deprecated as of OpenSSL v1.1.0. Once we can drop support for > > > builds > > > + * with OpenSSL pre v1.1.0 we should use > > > SSL_CTX_set_min_proto_version and > > > + * SSL_CTX_set_max_proto_version instead. */ > > > + > > > /* Start with all the flags off and turn them on as requested. */ > > > #ifndef SSL_OP_NO_SSL_MASK > > > - /* For old OpenSSL without this macro, this is the correct value. */ > > > + /* For old OpenSSL without this macro, this is the correct value. > > > + * > > > + * NOTE: We deliberately did not extend this compatibility macro to > > > + * include SSL_OP_NO_TLSv1_3 because if you do have a version of > > > OpenSSL > > > + * with TLSv1.3 support this macro would be defined by OpenSSL. */ > > > #define SSL_OP_NO_SSL_MASK (SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3 | \ > > > SSL_OP_NO_TLSv1 | SSL_OP_NO_TLSv1_1 | \ > > > SSL_OP_NO_TLSv1_2) > > > @@ -1272,12 +1287,20 @@ stream_ssl_set_protocols(const char *arg) > > > goto exit; > > > } > > > while (word != NULL) { > > > - long on_flag; > > > - if (!strcasecmp(word, "TLSv1.2")){ > > > + long on_flag = 0; > > > + if (!strcasecmp(word, "TLSv1.3")) { > > > +#if OPENSSL_VERSION_NUMBER < 0x10101000L > > > + /* OpenSSL versions prior to 1.1.1 do not have TLSv1.3 */ > > > + VLOG_ERR("%s: SSL protocol not recognized", word); > > > + goto exit; > > > +#else > > > + on_flag = SSL_OP_NO_TLSv1_3; > > > +#endif /* OPENSSL_VERSION_NUMBER < 0x10101000 */ > > > + } else if (!strcasecmp(word, "TLSv1.2")) { > > > on_flag = SSL_OP_NO_TLSv1_2; > > > - } else if (!strcasecmp(word, "TLSv1.1")){ > > > + } else if (!strcasecmp(word, "TLSv1.1")) { > > > on_flag = SSL_OP_NO_TLSv1_1; > > > - } else if (!strcasecmp(word, "TLSv1")){ > > > + } else if (!strcasecmp(word, "TLSv1")) { > > > on_flag = SSL_OP_NO_TLSv1; > > > } else { > > > VLOG_ERR("%s: SSL protocol not recognized", word); > > > diff --git a/m4/openvswitch.m4 b/m4/openvswitch.m4 > > > index 772825a71..429aacd11 100644 > > > --- a/m4/openvswitch.m4 > > > +++ b/m4/openvswitch.m4 > > > @@ -257,6 +257,22 @@ OpenFlow connections over SSL will not be supported. > > > else > > > AC_MSG_ERROR([Cannot find openssl (use --disable-ssl to > > > configure without SSL support)]) > > > fi]) > > > + OPENSSL_SUPPORTS_TLS1_2=no > > > + if test $HAVE_OPENSSL = yes; then > > > + save_CPPFLAGS=$CPPFLAGS > > > + CPPFLAGS="$CPPFLAGS $SSL_INCLUDES" > > > + AC_CHECK_DECL([TLS1_2_VERSION], [OPENSSL_SUPPORTS_TLS1_2=yes], > > > + [], [#include <openssl/ssl.h>]) > > > + if test $OPENSSL_SUPPORTS_TLS1_2 = no; then > > > + if test "$ssl" = check; then > > > + AC_MSG_WARN([Cannot find openssl with TLSv1.2 support. > > > OpenFlow connections over SSL will not be supported. (You may use > > > --disable-ssl to suppress this warning.)]) > > > + HAVE_OPENSSL=no > > > + else > > > + AC_MSG_ERROR([Cannot find openssl with TLSv1.2 support. > > > (use --disable-ssl to configure without SSL support)]) > > > + fi > > > + fi > > > + CPPFLAGS=$save_CPPFLAGS > > > + fi > > > else > > > HAVE_OPENSSL=no > > > fi > > > diff --git a/tests/ovsdb-server.at b/tests/ovsdb-server.at > > > index ac243d6a7..b52ca150c 100644 > > > --- a/tests/ovsdb-server.at > > > +++ b/tests/ovsdb-server.at > > > @@ -575,7 +575,6 @@ AT_CHECK( > > > "row": {"private_key": "'"$PKIDIR/testpki-privkey2.pem"'", > > > "certificate": "'"$PKIDIR/testpki-cert2.pem"'", > > > "ca_cert": "'"$PKIDIR/testpki-cacert.pem"'", > > > - "ssl_protocols": "'"TLSv1.2,TLSv1.1"'", > > > "ssl_ciphers": > > > "'"HIGH:!aNULL:!MD5:!ECDHE-ECDSA-AES256-GCM-SHA384"'"}}]']], > > > [0], [ignore], [ignore]) > > > on_exit 'kill `cat *.pid`' > > > @@ -594,7 +593,6 @@ AT_CHECK( > > > --private-key=$PKIDIR/testpki-privkey.pem \ > > > --certificate=$PKIDIR/testpki-cert.pem \ > > > --ca-cert=$PKIDIR/testpki-cacert.pem \ > > > - --ssl-protocols=TLSv1.2,TLSv1.1 \ > > > --ssl-ciphers=HIGH:!aNULL:!MD5 \ > > > transact ssl:127.0.0.1:$SSL_PORT \ > > > '["mydb", > > > @@ -608,7 +606,7 @@ AT_CHECK_UNQUOTED( > > > [cat output], [0], > > > > > > [[@<:@{"rows":@<:@{"private_key":"$PKIDIR/testpki-privkey2.pem"}@:>@}@:>@ > > > ]], [ignore]) > > > -# Check that when the server has TLSv1.1+ and the client has > > > +# Check that when the server has TLSv1.2+ and the client has > > > # TLSv1 that the connection fails. > > > AT_CHECK( > > > [[ovsdb-client \ > > > @@ -638,7 +636,7 @@ AT_CHECK( > > > --private-key=$PKIDIR/testpki-privkey.pem \ > > > --certificate=$PKIDIR/testpki-cert.pem \ > > > --ca-cert=$PKIDIR/testpki-cacert.pem \ > > > - --ssl-protocols=TLSv1.2,TLSv1.1 \ > > > + --ssl-protocols=TLSv1.2 \ > > > --ssl-ciphers=ECDHE-ECDSA-AES256-GCM-SHA384 \ > > > transact ssl:127.0.0.1:$SSL_PORT \ > > > '["mydb", > > > -- > > > 2.32.0 > > > > > > _______________________________________________ > > > dev mailing list > > > d...@openvswitch.org > > > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > > > -- > > fbl -- fbl _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev