Hi Vladislav,
On Wed, Nov 15, 2023 at 04:13:13PM +0300, Vladislav Odintsov wrote:
...
> Final flow:
> arp,reg11=0x2,reg12=0x6,reg14=0x4,reg15=0x2,tun_id=0x6,tun_src=10.1.0.103,tun_dst=10.1.0.109,tun_ipv6_src=::,tun_ipv6_dst=::,tun_gbp_id=0,tun_gbp_flags=0,tun_tos=0,tun_ttl=64,tun_erspan_ver=0,gtpu_flags=0,gtpu_msgtype=0,tun_flags=csum|key,tun_metadata0=0x40003,metadata=0x6,in_port=17,vlan_tci=0x0000,dl_src=00:00:c9:99:bd:0e,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=169.254.100.1,arp_tpa=169.254.100.3,arp_op=1,arp_sha=00:00:c9:99:bd:0e,arp_tha=00:00:00:00:00:00
> Megaflow:
> recirc_id=0,ct_state=-new-est-rel-rpl-trk,ct_label=0/0x3,eth,arp,tun_id=0x6,tun_src=10.1.0.103,tun_dst=10.1.0.109,tun_tos=0,tun_flags=-df+csum+key,tun_metadata0=0x40003,in_port=17,dl_src=00:00:c9:99:bd:0e,dl_dst=ff:ff:ff:ff:ff:ff,arp_tpa=169.254.100.3,arp_op=1
> Datapath actions:
> set(tunnel(tun_id=0xff0002,src=10.1.0.109,dst=10.1.1.18,ttl=64,tp_src=3275,tp_dst=6081,geneve({class=0x102,type=0x80,len=4,0x55008e}),flags(df|csum|key))),5
>
> The traffic is an OVN interconnection usecase, where there is a transit switch
> and two LRs are connected to it on different Availability Zones. LR on AZ1
> tries to resolve ARP for LR in another AZ.
In the flow here I see in_port=17 and output to port 5. Can you please
confirm which ports are those? The 2 ports of the CX6, maybe?
Asking because I'm a bit surprised that hairpin traffic with such
encap operations actually works.
Thanks,
Marcelo
_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
