On 28 May 2024, at 16:49, Ilya Maximets wrote:

> On 5/28/24 14:36, Eelco Chaudron wrote:
>>
>>
>> On 24 May 2024, at 11:20, Emma Finn wrote:
>>
>>> The AVX implementation for calcualting checksums was not
>>> handling carry-over addition correctly in some cases.
>>> This patch adds an additional shuffle to add 16-bit padding to
>>> the final part of the calculation to handle such cases. This
>>> commit also adds a unit test to check the checksum carry-bits
>>> issue with actions autovalidator enabled.
>>
>> Hi Emma,
>>
>> Thanks for sending out the v4. I have some small nits below, which I can fix 
>> during commit time. Assuming Ilya has no other simple to fix comments.
>>
>> Cheers,
>>
>> Eelco
>>
>>> Signed-off-by: Emma Finn <[email protected]>
>>> Reported-by: Eelco Chaudron <[email protected]>
>>> ---
>>>  lib/odp-execute-avx512.c |  5 ++++
>>>  tests/dpif-netdev.at     | 64 ++++++++++++++++++++++++++++++++++++++++
>>>  2 files changed, 69 insertions(+)
>>>
>>> diff --git a/lib/odp-execute-avx512.c b/lib/odp-execute-avx512.c
>>> index 50c48bfd4..a74a85dc1 100644
>>> --- a/lib/odp-execute-avx512.c
>>> +++ b/lib/odp-execute-avx512.c
>>> @@ -366,6 +366,8 @@ avx512_get_delta(__m256i old_header, __m256i new_header)
>>>                                            0xF, 0xF, 0xF, 0xF);
>>>      v_delta = _mm256_permutexvar_epi32(v_swap32a, v_delta);
>>>
>>> +    v_delta = _mm256_hadd_epi32(v_delta, v_zeros);
>>> +    v_delta = _mm256_shuffle_epi8(v_delta, v_swap16a);
>>>      v_delta = _mm256_hadd_epi32(v_delta, v_zeros);
>>>      v_delta = _mm256_hadd_epi16(v_delta, v_zeros);
>>>
>>> @@ -575,6 +577,9 @@ avx512_ipv6_sum_header(__m512i ip6_header)
>>>                                            0xF, 0xF, 0xF, 0xF);
>>>
>>>      v_delta = _mm256_permutexvar_epi32(v_swap32a, v_delta);
>>> +
>>> +    v_delta = _mm256_hadd_epi32(v_delta, v_zeros);
>>> +    v_delta = _mm256_shuffle_epi8(v_delta, v_swap16a);
>>>      v_delta = _mm256_hadd_epi32(v_delta, v_zeros);
>>>      v_delta = _mm256_hadd_epi16(v_delta, v_zeros);
>>>
>>> diff --git a/tests/dpif-netdev.at b/tests/dpif-netdev.at
>>> index 790b5a43a..260986ba9 100644
>>> --- a/tests/dpif-netdev.at
>>> +++ b/tests/dpif-netdev.at
>>> @@ -1091,3 +1091,67 @@ OVS_VSWITCHD_STOP(["dnl
>>>  /Error: unknown miniflow extract implementation superstudy./d
>>>  /Error: invalid study_pkt_cnt value: -pmd./d"])
>>>  AT_CLEANUP
>>> +
>>> +AT_SETUP([datapath - Actions Autovalidator Checksum])
>>> +
>>> +OVS_VSWITCHD_START(add-port br0 p0 -- set Interface p0 type=dummy \
>>> +                   -- add-port br0 p1 -- set Interface p1 type=dummy)
>>> +
>>> +AT_CHECK([ovs-appctl odp-execute/action-impl-set autovalidator], [0], [dnl
>>> +Action implementation set to autovalidator.
>>> +])
>>> +
>>> +# Add flows to trigger checksum calculation
>>
>> Comments should end with a dot(.). Also, not sure if ‘#’ is fine here, as we 
>> are
>> moving to ‘dnl’, but this file has both (most are ‘#’). Ilya?
>
> Both are fine, 'dnl' is a bit cleaner, so if you want to swap those
> on commit that's fine, but there is no point in new version just for
> that.
>
> Note that while backporting the fix we'll need to substitute the
> 'compose-packet' calls with their results, since bare packet compose
> is not available pre 3.3.
>
>>
>>> +AT_DATA([flows.txt], [ddl
>>> +  in_port=p0,ip,actions=mod_nw_src=10.1.1.1,p1
>>> +  in_port=p0,ipv6,actions=set_field:fc00::100->ipv6_src,p1
>>> +])
>>> +AT_CHECK([ovs-ofctl del-flows br0])
>>> +AT_CHECK([ovs-ofctl -Oopenflow13 add-flows br0 flows.txt])
>>> +
>>> +# Make sure checksum won't be offloaded
>>> +AT_CHECK([ovs-vsctl set Interface p0 options:ol_ip_csum=false])
>>> +AT_CHECK([ovs-vsctl set Interface p0 options:ol_ip_csum_set_good=false])
>>> +
>>> +AT_CHECK([ovs-vsctl set Interface p1 options:pcap=p1.pcap])
>>> +
>>> +# IPv4 packet with values that will trigger carry-over addition for 
>>> checksum
>>> +flow_s_v4="\
>>> +  eth_src=47:42:86:08:17:50,eth_dst=3e:55:b5:9e:3a:fb,dl_type=0x0800,\
>>> +  
>>> nw_src=229.167.36.90,nw_dst=130.161.64.186,nw_proto=6,nw_ttl=64,nw_frag=no,\
>>> +  tp_src=54392,tp_dst=5201,tcp_flags=ack"
>>> +
>>> +good_frame=$(ovs-ofctl compose-packet --bare "${flow_s_v4}")
>>> +AT_CHECK([ovs-appctl netdev-dummy/receive p0 ${good_frame}])
>>> +
>>> +# Checksum should change to 0xAC33 with ip_src changed to 10.1.1.1
>>> +# by the datapath while processing the packet.
>>> +flow_expected=$(echo "${flow_s_v4}" | sed 's/229.167.36.90/10.1.1.1/g')
>>> +good_expected=$(ovs-ofctl compose-packet --bare "${flow_expected}")
>>> +AT_CHECK([ovs-pcap p1.pcap > p1.pcap.txt 2>&1])
>>> +AT_CHECK_UNQUOTED([tail -n 1 p1.pcap.txt], [0], [${good_expected}
>>> +])
>>> +
>>> +#Repeat similar test for IPv6
>>
>> Space between # and Repeat.
>>
>>> +flow_s_v6="\
>>> +  eth_src=8a:bf:7e:2f:05:84,eth_dst=0a:8f:39:4f:e0:73,dl_type=0x86dd, \
>>> +  ipv6_src=2f8a:2076:3926:9e7:2d47:4bc9:9c7:17f3, \
>>> +  ipv6_dst=7287:10dd:2fb9:41d5:3eb2:2c7a:11b0:6258, \
>>> +  ipv6_label=0x51ac,nw_proto=6,nw_ttl=142,nw_frag=no, \
>>> +  tp_src=20405,tp_dst=20662,tcp_flags=ack"
>
> Nit: Line continuation ('\') is not necessary within strings.

Right, I can fix all this on commit. Let me add my ACK below, and if you have 
no other objections, I’ll commit?

Acked-by: Eelco Chaudron <[email protected]>

>>> +
>>> +
>> A single new line is enough here.
>>
>>> +good_frame_v6=$(ovs-ofctl compose-packet --bare "${flow_s_v6}")
>>> +AT_CHECK([ovs-appctl netdev-dummy/receive p0 ${good_frame_v6}])
>>> +
>>> +# Checksum should change to 0x59FD with ipv6_src changed to fc00::100
>>> +# by the datapath while processing the packet.
>>> +flow_expected_v6=$(echo "${flow_s_v6}" | \
>>> +  sed 's/2f8a:2076:3926:9e7:2d47:4bc9:9c7:17f3/fc00::100/g')
>>> +good_expected_v6=$(ovs-ofctl compose-packet --bare "${flow_expected_v6}")
>>> +AT_CHECK([ovs-pcap p1.pcap > p1.pcap.txt 2>&1])
>>> +AT_CHECK_UNQUOTED([tail -n 1 p1.pcap.txt], [0], [${good_expected_v6}
>>> +])
>>> +
>>> +OVS_VSWITCHD_STOP
>>> +AT_CLEANUP
>>> -- 
>>> 2.34.1
>>

_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to