On 6/5/24 22:23, Adrian Moreno wrote: > Test simultaneous IPFIX and local sampling including slow-path. > > Signed-off-by: Adrian Moreno <[email protected]> > --- > tests/system-common-macros.at | 4 ++ > tests/system-traffic.at | 105 ++++++++++++++++++++++++++++++++++ > 2 files changed, 109 insertions(+) >
Not a full review, but see a few comments below. > diff --git a/tests/system-common-macros.at b/tests/system-common-macros.at > index 2a68cd664..22b8885e4 100644 > --- a/tests/system-common-macros.at > +++ b/tests/system-common-macros.at > @@ -378,3 +378,7 @@ m4_define([OVS_CHECK_GITHUB_ACTION], > # OVS_CHECK_DROP_ACTION() > m4_define([OVS_CHECK_DROP_ACTION], > [AT_SKIP_IF([! grep -q "Datapath supports explicit drop action" > ovs-vswitchd.log])]) > + > +# OVS_CHECK_EMIT_SAMPLE() > +m4_define([OVS_CHECK_EMIT_SAMPLE], > + [AT_SKIP_IF([! grep -q "Datapath supports emit_sample" > ovs-vswitchd.log])]) > diff --git a/tests/system-traffic.at b/tests/system-traffic.at > index bd7647cbe..babc56b56 100644 > --- a/tests/system-traffic.at > +++ b/tests/system-traffic.at > @@ -8977,3 +8977,108 @@ OVS_WAIT_UNTIL([cat p2.pcap | grep -E "0x0050: *0000 > *0000 *5002 *2000 *b85e *00 > > OVS_TRAFFIC_VSWITCHD_STOP > AT_CLEANUP > + > +AT_SETUP([emit_sample]) Other tests have a test group name at the beginning. You're also adding the test into NSH section. Add a new section, e.g., 'sampling' for this with AT_BANNER. > +OVS_TRAFFIC_VSWITCHD_START() > +OVS_CHECK_EMIT_SAMPLE() > + > +ADD_NAMESPACES(at_ns0, at_ns1) > +NS_CHECK_EXEC([at_ns0], [sysctl -w net.ipv6.conf.all.disable_ipv6=1], [0], > [ignore]) > +NS_CHECK_EXEC([at_ns1], [sysctl -w net.ipv6.conf.all.disable_ipv6=1], [0], > [ignore]) This looks strange, don't disable IPv6. Appropriate datapath actions should not forward IPv6 traffic, if that is a desired behavior. Though, I guess, it would be nice to test capturing both IPv4 and IPv6. > + > +ADD_VETH(p0, at_ns0, br0, "10.1.1.1/24", "e4:11:22:33:44:55") > +ADD_VETH(p1, at_ns1, br0, "10.1.1.2/24", "e4:11:22:33:44:66") > + > +NS_CHECK_EXEC([at_ns0], [arp -s 10.1.1.2 e4:11:22:33:44:66]) > +NS_CHECK_EXEC([at_ns1], [arp -s 10.1.1.1 e4:11:22:33:44:55]) > + > + > +AT_CHECK([ovs-appctl vlog/set dpif:dbg dpif_netdev:dbg > ofproto_dpif_upcall:dbg]) > + > +AT_CHECK([ovs-vsctl -- --id=@br0 get Bridge br0 \ > + -- --id=@ipfix create IPFIX targets=\"127.0.0.1:4739\" \ > + -- create Flow_Sample_Collector_Set id=1 bridge=@br0 > ipfix=@ipfix, local_sample_group=10 \ > + -- create Flow_Sample_Collector_Set id=2 bridge=@br0 > ipfix=@ipfix, local_sample_group=12], > + [0], [ignore]) Why are we adding IPFIX? This should work without IPFIX. Having both together can be a separate test. > + > +AT_DATA([flows.txt], [dnl > +in_port=ovs-p0,ip > actions=sample(probability=65535,collector_set_id=1,obs_domain_id=1431655765,obs_point_id=1717986918),output(port=ovs-p1,max_len=100) > +in_port=ovs-p1,ip > actions=sample(probability=65535,collector_set_id=2,obs_domain_id=2290649224,obs_point_id=2576980377),output(port=ovs-p0,max_len=100) It should be possible to wrap these lines a little with dnl. Also, please make IDs non-symmetric, so we can't check that the byte order is correct. > +]) > + > +AT_CHECK([ovs-ofctl add-flows br0 flows.txt]) > + > +OVS_DAEMONIZE([ovstest test-psample > psample.out], [psample1.pid]) Should we wait for the test app to start listening? i.e. there might be a race between the listener and the ping below. > + > +NS_CHECK_EXEC([at_ns0], [ping -q -c 1 10.1.1.2 | FORMAT_PING], [0], [dnl > +1 packets transmitted, 1 received, 0% packet loss, time 0ms > +]) We may need to add -W to the ping. > + > +m4_define([SAMPLE1], [group_id=0xa > obs_domain=0x55555555,obs_point=0x66666666 > .*icmp.*nw_src=10.1.1.1,nw_dst=10.1.1.2]) > +m4_define([SAMPLE2], [group_id=0xc > obs_domain=0x88888888,obs_point=0x99999999 > .*icmp.*nw_src=10.1.1.2,nw_dst=10.1.1.1]) May use m4_join to wrap these lines. > +AT_CHECK([grep -E 'SAMPLE1' psample.out >/dev/null]) > +AT_CHECK([grep -E 'SAMPLE2' psample.out >/dev/null]) 'grep -q' to avoid the output redirection. We may need to wait for them also, i.e. OVS_WAIT_UNTIL. > + > +AT_CHECK([ovs-ofctl dump-ipfix-flow br0 | sed 's/tx pkts=[[0-9]]*/tx > pkts=24/' | sed 's/tx errs=[[0-9]]*/tx errs=0/'], [0], Wrap the line with '\'. [dnl > +NXST_IPFIX_FLOW reply (xid=0x2): 2 ids > + id 1: flows=1, current flows=0, sampled pkts=1, ipv4 ok=1, ipv6 ok=0, tx > pkts=24 > + pkts errs=0, ipv4 errs=0, ipv6 errs=0, tx errs=0 > + id 2: flows=1, current flows=0, sampled pkts=1, ipv4 ok=1, ipv6 ok=0, tx > pkts=24 > + pkts errs=0, ipv4 errs=0, ipv6 errs=0, tx errs=0 > +]) > + > +AT_CHECK([ovs-appctl lsample/show br0], [0], [dnl > +local sample statistics for bridge "br0": > +- Collector Set ID: 1 > + Local Sample Group: 10 > + Total number of bytes: 98 > + Total number of packets: 1 > + > +- Collector Set ID: 2 > + Local Sample Group: 12 > + Total number of bytes: 98 > + Total number of packets: 1 > +]) > + > +# Disable trunc feature to force traffic to go through slow path. dnl > +AT_CHECK([ovs-appctl dpif/set-dp-features br0 trunc false]) > + > +AT_CHECK([ovs-appctl ofproto/trace br0 > 'in_port=ovs-p0,dl_src=e4:11:22:33:44:55,dl_dst=e4:11:22:33:44:66,dl_type=0x0800,nw_src=10.1.1.1,nw_dst=10.1.1.12'], > [0], [stdout]) Can be wrapped with m4_join. > +AT_CHECK([tail -3 stdout], [0], [dnl > +Datapath actions: > emit_sample(group=10,cookie=5555555566666666),userspace(pid=4294967295,flow_sample(probability=65535,collector_set_id=1,obs_domain_id=1431655765,obs_point_id=1717986918,output_port=4294967295)),trunc(100),3 > +This flow is handled by the userspace slow path because it: > + - Uses action(s) not supported by datapath. > +]) Wrap. > + > +OVS_DAEMONIZE([ovstest test-psample > psample_slow.out], [psample_slow.pid]) Wait? > + > +NS_CHECK_EXEC([at_ns0], [ping -q -c 1 10.1.1.2 | FORMAT_PING], [0], [dnl > +1 packets transmitted, 1 received, 0% packet loss, time 0ms > +]) -W > + > +AT_CHECK([grep -E 'SAMPLE1' psample_slow.out >/dev/null]) > +AT_CHECK([grep -E 'SAMPLE2' psample_slow.out >/dev/null]) -q, wait > + > +AT_CHECK([ovs-ofctl dump-ipfix-flow br0 | sed 's/tx pkts=[[0-9]]*/tx > pkts=24/' | sed 's/tx errs=[[0-9]]*/tx errs=0/'], [0], [dnl wrap. > +NXST_IPFIX_FLOW reply (xid=0x2): 2 ids > + id 1: flows=2, current flows=0, sampled pkts=2, ipv4 ok=2, ipv6 ok=0, tx > pkts=24 > + pkts errs=0, ipv4 errs=0, ipv6 errs=0, tx errs=0 > + id 2: flows=2, current flows=0, sampled pkts=2, ipv4 ok=2, ipv6 ok=0, tx > pkts=24 > + pkts errs=0, ipv4 errs=0, ipv6 errs=0, tx errs=0 > +]) > + > +AT_CHECK([ovs-appctl lsample/show br0], [0], [dnl > +local sample statistics for bridge "br0": > +- Collector Set ID: 1 > + Local Sample Group: 10 > + Total number of bytes: 196 > + Total number of packets: 2 > + > +- Collector Set ID: 2 > + Local Sample Group: 12 > + Total number of bytes: 196 > + Total number of packets: 2 > +]) > + > +OVS_TRAFFIC_VSWITCHD_STOP(["/sending to collector failed/d"]) Why does this warning appear? > +AT_CLEANUP _______________________________________________ dev mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-dev
