MLD flows are added to pipelines unconditionally in order to avoid
sending such traffic through conntrack. The problem is that these
matches turn into matches on ip6.dst that end up as exact matches in
datapath flows. This means a separate datapath flow per destination
IP address. This may cause significant performance issues in setups
where traffic for many different IP addresses is passing through.
Since network protocol is stored further in the packet, it is evaluated
after checking the IP addresses, and so having a match on ip.proto
doesn't save us in this scenario.
MLD packets are all supposed to be multicast packets and so they all
should have multicast destination ethernet addresses. Add the missing
eth.mcast6 match to all such packets. This ensures that non-multicast
traffic will quickly fail the OpenFlow lookup on such rules and the bits
from higher layers will not be added to the match criteria in datapath
flows. This also ensures that OVN doesn't handle incorrect MLD packets.
There are still ND responder flows that can add extra matches for IPv6
addresses, but they can be disabled or handled by other means.
IGMP did not check for IP address being multicast for some reason, so
it didn't cause issues for IPv4 traffic. But let's fix it as well.
Tests were using incorrect multicast addresses, fixed now.
Fixes: 677a3ba4d66b ("ovn: Add MLD support.")
Signed-off-by: Ilya Maximets <[email protected]>
---
lib/logical-fields.c | 7 ++++---
tests/ovn.at | 23 +++++++++++++++++------
2 files changed, 21 insertions(+), 9 deletions(-)
diff --git a/lib/logical-fields.c b/lib/logical-fields.c
index 134d2674f..2c9d3c61b 100644
--- a/lib/logical-fields.c
+++ b/lib/logical-fields.c
@@ -233,7 +233,7 @@ ovn_init_symtab(struct shash *symtab)
expr_symtab_add_field(symtab, "icmp4.code", MFF_ICMPV4_CODE, "icmp4",
false);
- expr_symtab_add_predicate(symtab, "igmp", "ip4 && ip.proto == 2");
+ expr_symtab_add_predicate(symtab, "igmp", "ip4.mcast && ip.proto == 2");
expr_symtab_add_field(symtab, "ip6.src", MFF_IPV6_SRC, "ip6", false);
expr_symtab_add_field(symtab, "ip6.dst", MFF_IPV6_DST, "ip6", false);
@@ -307,11 +307,12 @@ ovn_init_symtab(struct shash *symtab)
* (RFC 2710 and RFC 3810).
*/
expr_symtab_add_predicate(symtab, "mldv1",
- "ip6.src == fe80::/10 && "
+ "eth.mcastv6 && ip6.src == fe80::/10 && "
"icmp6.type == {130, 131, 132}");
/* MLDv2 packets are sent to ff02::16 (RFC 3810, 5.2.14) */
expr_symtab_add_predicate(symtab, "mldv2",
- "ip6.dst == ff02::16 && icmp6.type == 143");
+ "eth.mcastv6 && ip6.dst == ff02::16 && "
+ "icmp6.type == 143");
expr_symtab_add_predicate(symtab, "tcp", "ip.proto == 6");
expr_symtab_add_field(symtab, "tcp.src", MFF_TCP_SRC, "tcp", false);
diff --git a/tests/ovn.at b/tests/ovn.at
index 7ccbbff66..aac9af0c0 100644
--- a/tests/ovn.at
+++ b/tests/ovn.at
@@ -5915,13 +5915,24 @@ for i in 1 2 3; do
# Test ICMPv6 MLD reports (v1 and v2) and NS for DAD
sip=::
- test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 f0:00:00:00:00:21 $sip
ff02::16:0 "ICMPv6MLReport()" 21
- test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 f0:00:00:00:00:21 $sip
ff02::16:0 "ICMPv6MLReport2()" 21
- test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 f0:00:00:00:00:21 $sip
ff02::ea:2aea:fffe:2800 "ICMPv6ND_NS()" 21
+ # Multicast traffic is delivered to all ports, except for the source.
+ out_ports=
+ for j in 1 2 3; do
+ for k in 1 2 3; do
+ if test "${j}${k}" -eq "${i}3"; then
+ continue
+ else
+ out_ports="$out_ports ${j}${k}"
+ fi
+ done
+ done
+ test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 33:33:00:16:00:00 $sip
ff02::16:0 "ICMPv6MLReport()" ${out_ports}
+ test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 33:33:00:16:00:00 $sip
ff02::16:0 "ICMPv6MLReport2()" ${out_ports}
+ test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 33:33:ff:fe:28:00 $sip
ff02::ea:2aea:fffe:2800 "ICMPv6ND_NS()" ${out_ports}
# Traffic to non-multicast traffic should be dropped
test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 f0:00:00:00:00:21 $sip $tip
"ICMPv6MLReport()"
# Traffic of other ICMPv6 types should be dropped
- test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 f0:00:00:00:00:21 $sip
ff02::16:0 "ICMPv6EchoRequest()"
+ test_icmpv6 ${i}3 f0:00:00:00:0${i}:${i}3 33:33:00:16:00:00 $sip
ff02::16:0 "ICMPv6EchoRequest()"
# should be dropped
sip=ae80::ea2a:eaff:fe28:00aa
@@ -14446,8 +14457,8 @@ test_mldv2() {
local inport=$1 outport=$2 src_mac=$3 src_ip=$4
packet=$(fmt_pkt "
- Ether(dst='ff:ff:ff:ff:ff:ff', src='${src_mac}') /
- IPv6(src='${src_ip}', dst='ff02::2') /
+ Ether(dst='33:33:00:00:00:01', src='${src_mac}') /
+ IPv6(src='${src_ip}', dst='ff02::1') /
ICMPv6MLQuery2()
")
as hv1 ovs-appctl netdev-dummy/receive vif${inport} $packet
--
2.45.2
_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev