This change will be useful for migration cases, where it can be used to sync ct-entries before port is up on new chassis, resulting in reduced network package drops. It also fulfills the need of any other service which might need advance ct-zone reservation in future.
Signed-off-by: Mansi Sharma <[email protected]> --- v5-->v6 Updated tests to check duplicates more frequntly with input as ct_zones. --- controller/ct-zone.c | 25 ++++++++++ controller/ovn-controller.8.xml | 15 +++++- tests/ovn-controller.at | 86 ++++++++++++++++++++++++++++++--- 3 files changed, 117 insertions(+), 9 deletions(-) diff --git a/controller/ct-zone.c b/controller/ct-zone.c index 77eb16ac9..bd1b0623b 100644 --- a/controller/ct-zone.c +++ b/controller/ct-zone.c @@ -183,6 +183,31 @@ ct_zones_update(const struct sset *local_lports, sset_add(&all_users, local_lport); } + /* Add local_lport name which are supposed to come up on the + * chassis and might need ct-zone reservation in advance. + * The data is picked up from ovs_vswitch table. */ + const struct ovsrec_open_vswitch *cfg; + cfg = ovsrec_open_vswitch_table_first(ovs_table); + + if (cfg) { + const char *reserve_ct_zone_request_list = smap_get( + &cfg->external_ids, "reserve_ct_zones"); + + if (reserve_ct_zone_request_list) { + char *dup_reserve = xstrdup(reserve_ct_zone_request_list); + char *reserve_port; + char *save_ptr = NULL; + + for (reserve_port = strtok_r(dup_reserve, ",", &save_ptr); + reserve_port != NULL; + reserve_port = strtok_r(NULL, ",", &save_ptr)) { + sset_add(&all_users, reserve_port); + } + + free(dup_reserve); + } + } + /* Local patched datapath (gateway routers) need zones assigned. */ const struct local_datapath *ld; HMAP_FOR_EACH (ld, hmap_node, local_datapaths) { diff --git a/controller/ovn-controller.8.xml b/controller/ovn-controller.8.xml index faefa77b9..b070b724c 100644 --- a/controller/ovn-controller.8.xml +++ b/controller/ovn-controller.8.xml @@ -626,7 +626,20 @@ <code>external_ids:ovn-installed-ts</code>. </p> </dd> - </dl> + + <dt> + <code>external-ids:reserve_ct_zones</code> in the <code>Bridge</code> + table + </dt> + + <dd> + <p> + This key represents list of ports which are supposed to come up on + the chassis, and hence need advance reservation of ct-zones. + It is comma seprated list of port names. + </p> + </dd> + </dl> <h1>OVN Southbound Database Usage</h1> diff --git a/tests/ovn-controller.at b/tests/ovn-controller.at index 74bff9035..4377ac6f2 100644 --- a/tests/ovn-controller.at +++ b/tests/ovn-controller.at @@ -2533,8 +2533,14 @@ check_ovsdb_zone() { test $ct_zone -eq $db_zone } +check_duplicates() { + output=$1 + AT_CHECK([printf "$output" | tr ' ' '\n' | sort | uniq -d | grep .], [1]) +} + check ovs-vsctl add-port br-int ls0-hv1 -- set Interface ls0-hv1 external-ids:iface-id=ls0-hv1 check ovs-vsctl add-port br-int ls0-hv2 -- set Interface ls0-hv2 external-ids:iface-id=ls0-hv2 +check ovs-vsctl set Open_vSwitch . external_ids:reserve_ct_zones=ls0-req-hv3,ls0-req-hv4 check ovn-nbctl lr-add lr0 @@ -2560,17 +2566,18 @@ echo "$ct_zones" port1_zone=$(get_zone_num "$ct_zones" ls0-hv1) port2_zone=$(get_zone_num "$ct_zones" ls0-hv2) - +req_port3_zone=$(get_zone_num "$ct_zones" ls0-req-hv3) +req_port4_zone=$(get_zone_num "$ct_zones" ls0-req-hv4) snat_zone=$(get_zone_num "$ct_zones" lr0_snat) echo "snat_zone is $snat_zone" -check test "$port1_zone" -ne "$port2_zone" -check test "$port2_zone" -ne "$snat_zone" -check test "$port1_zone" -ne "$snat_zone" - OVS_WAIT_UNTIL([check_ovsdb_zone ls0-hv1 $port1_zone]) OVS_WAIT_UNTIL([check_ovsdb_zone ls0-hv2 $port2_zone]) OVS_WAIT_UNTIL([check_ovsdb_zone lr0_snat $snat_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-req-hv3 $req_port3_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-req-hv4 $req_port4_zone]) + +check_duplicates "$ct_zones" # Now purposely request an SNAT zone for lr0 that conflicts with a zone # currently assigned to a logical port @@ -2585,15 +2592,78 @@ echo "$ct_zones" port1_zone=$(get_zone_num "$ct_zones" ls0-hv1) port2_zone=$(get_zone_num "$ct_zones" ls0-hv2) snat_zone=$(get_zone_num "$ct_zones" lr0_snat) +req_port3_zone=$(get_zone_num "$ct_zones" ls0-req-hv3) +req_port4_zone=$(get_zone_num "$ct_zones" ls0-req-hv4) check test "$snat_zone" -eq "$snat_req_zone" -check test "$port1_zone" -ne "$port2_zone" -check test "$port2_zone" -ne "$snat_zone" -check test "$port1_zone" -ne "$snat_zone" + +check_duplicates "$ct_zones" + +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-hv1 $port1_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-hv2 $port2_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone lr0_snat $snat_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-req-hv3 $req_port3_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-req-hv4 $req_port4_zone]) + +# Add port named ls0-req-hv3 and check if same zone assigned +# previously get assigned to it this time as well. + +check ovn-nbctl lsp-add ls0 ls0-req-hv3 +check ovs-vsctl -- add-port br-int hv3-vif3 -- \ + set interface hv3-vif3 external-ids:iface-id=ls0-req-hv3 +ct_zones=$(ovn-appctl -t ovn-controller ct-zone-list) +echo "$ct_zones" + +check ovn-nbctl --wait=hv sync + +req_port3_zone_new=$(get_zone_num "$ct_zones" ls0-req-hv3) +check test "$req_port3_zone -eq $req_port3_zone_new" +check_duplicates "$ct_zones" + +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-hv1 $port1_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-hv2 $port2_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone lr0_snat $snat_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-req-hv3 $req_port3_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-req-hv4 $req_port4_zone]) + +# Checks for two cases after removing entry from ovs_vswitch table - +# 1. If port is already up, ct-zone should be reserved. +# 2. If port is not up yet, ct-zone should not be reserved. + +check ovs-vsctl remove Open_vSwitch . external_ids reserve_ct_zones + +ct_zones=$(ovn-appctl -t ovn-controller ct-zone-list) +echo "$ct_zones" + +req_port3_zone_after_delete=$(get_zone_num "$ct_zones" ls0-req-hv3) +req_port4_zone_after_delete=$(get_zone_num "$ct_zones" ls0-req-hv4) + +check test "$req_port3_zone_new" -eq "$req_port3_zone_after_delete" +check test "$req_port4_zone_after_delete" == "" + +# Checks for case when a ct-zone is reserved it comes up on that chassis, and +# gets deleted, but its persisted in ovs_vswitch table, it should persist the +# same zone throughout. + +check ovs-vsctl set Open_vSwitch . external_ids:reserve_ct_zones=ls0-req-hv5 +check ovn-nbctl lsp-add ls0 ls0-req-hv5 +check ovs-vsctl -- add-port br-int hv5-vif5 -- \ + set interface hv5-vif5 external-ids:iface-id=ls0-req-hv5 +ct_zones=$(ovn-appctl -t ovn-controller ct-zone-list) +echo "$ct_zones" +req_port5_zone=$(get_zone_num "$ct_zones" ls0-req-hv5) + +check ovs-vsctl remove interface hv5-vif5 external_ids iface-id +echo "$ct_zones" +req_port5_zone_new=$(get_zone_num "$ct_zones" ls0-req-hv5) + +check test "$req_port5_zone" -eq "$req_port5_zone_new" +check_duplicates "$ct_zones" OVS_WAIT_UNTIL([check_ovsdb_zone ls0-hv1 $port1_zone]) OVS_WAIT_UNTIL([check_ovsdb_zone ls0-hv2 $port2_zone]) OVS_WAIT_UNTIL([check_ovsdb_zone lr0_snat $snat_zone]) +OVS_WAIT_UNTIL([check_ovsdb_zone ls0-req-hv3 $req_port3_zone]) # Now create a conflict in the OVSDB and restart ovn-controller. -- 2.22.3 _______________________________________________ dev mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-dev
