On Thu, Oct 3, 2024 at 5:02 PM Mike Pattrick <[email protected]> wrote:
>
> Currently a bond will not always revalidate when an active member
> changes. This can result in counter-intuitive behaviors like the fact
> that using ovs-appctl bond/set-active-member will cause the bond to
> revalidate but changing other_config:bond-primary will not trigger a
> revalidate in the bond.
>
> When revalidation is not set but the active member changes in an
> unbalanced bond, OVS may send traffic out of previously active member
> instead of the new active member.
>
> This change will always mark unbalanced bonds for revalidation if the
> active member changes.
>
> Reported-at: https://issues.redhat.com/browse/FDP-845
> Signed-off-by: Mike Pattrick <[email protected]>
> ---
> v2: Added a test
> v3: Made the test more reliable
> v4: Made test much more reliable
> v5: Improved test performance
> v6: Improved system test by removing waits on ping.
> v7: Added a unit test.
> ---
>  ofproto/bond.c          |  8 +++++--
>  tests/ofproto-dpif.at   | 40 ++++++++++++++++++++++++++++++++
>  tests/system-traffic.at | 51 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 97 insertions(+), 2 deletions(-)
>
> diff --git a/ofproto/bond.c b/ofproto/bond.c
> index 0858de374..b9e2282f0 100644
> --- a/ofproto/bond.c
> +++ b/ofproto/bond.c
> @@ -193,6 +193,7 @@ static void bond_update_post_recirc_rules__(struct bond 
> *, bool force)
>  static bool bond_is_falling_back_to_ab(const struct bond *);
>  static void bond_add_lb_output_buckets(const struct bond *);
>  static void bond_del_lb_output_buckets(const struct bond *);
> +static bool bond_is_balanced(const struct bond *bond) OVS_REQ_RDLOCK(rwlock);
>
>
>  /* Attempts to parse 's' as the name of a bond balancing mode.  If 
> successful,
> @@ -549,11 +550,15 @@ bond_find_member_by_mac(const struct bond *bond, const 
> struct eth_addr mac)
>
>  static void
>  bond_active_member_changed(struct bond *bond)
> +    OVS_REQ_WRLOCK(rwlock)
>  {
>      if (bond->active_member) {
>          struct eth_addr mac;
>          netdev_get_etheraddr(bond->active_member->netdev, &mac);
>          bond->active_member_mac = mac;
> +        if (!bond_is_balanced(bond)) {
> +            bond->bond_revalidate = true;
> +        }
>      } else {
>          bond->active_member_mac = eth_addr_zero;
>      }
> @@ -1121,7 +1126,7 @@ bond_get_recirc_id_and_hash_basis(struct bond *bond, 
> uint32_t *recirc_id,
>  /* Rebalancing. */
>
>  static bool
> -bond_is_balanced(const struct bond *bond) OVS_REQ_RDLOCK(rwlock)
> +bond_is_balanced(const struct bond *bond)
>  {
>      return bond->rebalance_interval
>          && (bond->balance == BM_SLB || bond->balance == BM_TCP)
> @@ -1725,7 +1730,6 @@ bond_unixctl_set_active_member(struct unixctl_conn 
> *conn,
>      }
>
>      if (bond->active_member != member) {
> -        bond->bond_revalidate = true;
>          bond->active_member = member;
>          VLOG_INFO("bond %s: active member is now %s",
>                    bond->name, member->name);
> diff --git a/tests/ofproto-dpif.at b/tests/ofproto-dpif.at
> index 12cb7f7a6..7a916de54 100644
> --- a/tests/ofproto-dpif.at
> +++ b/tests/ofproto-dpif.at
> @@ -351,6 +351,46 @@ 
> recirc_id(0),in_port(4),packet_type(ns=0,id=0),eth(src=50:54:00:00:00:0b,dst=ff:
>  OVS_VSWITCHD_STOP
>  AT_CLEANUP
>
> +AT_SETUP([ofproto-dpif - active-backup bonding set primary])
> +
> +OVS_VSWITCHD_START(
> +  [add-bond br0 bond0 p1 p2 bond_mode=active-backup \
> +                other_config:bond-primary=p1 -- \
> +   set bridge br0 other-config:hwaddr=aa:66:aa:66:aa:00 -- \
> +   set interface p1 type=dummy options:pstream=punix:$OVS_RUNDIR/p1.sock 
> ofport_request=1 -- \
> +   set interface p2 type=dummy options:pstream=punix:$OVS_RUNDIR/p2.sock 
> ofport_request=2 -- \
> +   add-port br0 p7 -- set interface p7 ofport_request=7 type=dummy -- \
> +   add-br br1 -- \
> +   set bridge br1 other-config:hwaddr=aa:66:aa:66:00:00 -- \
> +   set bridge br1 datapath-type=dummy -- \
> +   add-bond br1 bond1 p3 p4 bond_mode=active-backup \
> +                other_config:bond-primary=p3 -- \
> +   set interface p3 type=dummy options:stream=unix:$OVS_RUNDIR/p1.sock 
> ofport_request=3 -- \
> +   set interface p4 type=dummy options:stream=unix:$OVS_RUNDIR/p2.sock 
> ofport_request=4 -- \
> +   add-port br1 p8 -- set interface p8 ofport_request=8 type=dummy])
> +
> +WAIT_FOR_DUMMY_PORTS([p3], [p4])
> +
> +AT_CHECK([ovs-ofctl add-flow br0 action=normal])
> +AT_CHECK([ovs-ofctl add-flow br1 action=normal])
> +
> +dnl Create datapath flow with bidirectional traffic.
> +AT_CHECK([ovs-appctl netdev-dummy/receive p8 
> 'in_port(8),eth(dst=50:54:00:00:00:09,src=50:54:00:00:00:0a),eth_type(0x0800),ipv4(dst=10.0.0.2,src=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
> +AT_CHECK([ovs-appctl netdev-dummy/receive p7 
> 'in_port(7),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
> +AT_CHECK([ovs-appctl netdev-dummy/receive p8 
> 'in_port(8),eth(dst=50:54:00:00:00:09,src=50:54:00:00:00:0a),eth_type(0x0800),ipv4(dst=10.0.0.2,src=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
> +AT_CHECK([ovs-appctl netdev-dummy/receive p7 
> 'in_port(7),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
> +
> +dnl Set p2 and p4 as primary.
> +AT_CHECK([ovs-vsctl set port bond0 other_config:bond-primary=p2 -- \
> +                    set port bond1 other_config:bond-primary=p4])
> +
> +OVS_WAIT_UNTIL([test -n "`ovs-appctl bond/show | grep 'active-backup 
> primary: p4'`"])
> +
> +AT_CHECK([ovs-appctl dpctl/dump-flows --names | grep "actions:p[[13]]"], 
> [1], [])

I find that netdev-dummy/receive causes the relevant flows to
revalidate immediately, whereas non-dummy datapaths don't have this
behaviour. However, this test should fail/succeed appropriately
depending on if setting bond-primary triggers revalidation.

-M

> +
> +OVS_VSWITCHD_STOP
> +AT_CLEANUP
> +
>  AT_SETUP([ofproto-dpif - balance-slb bonding])
>  # Create br0 with members bond0(p1, p2, p3) and p7,
>  #    and br1 with members p4, p5, p6 and p8.
> diff --git a/tests/system-traffic.at b/tests/system-traffic.at
> index 724b25fa9..64f5400ad 100644
> --- a/tests/system-traffic.at
> +++ b/tests/system-traffic.at
> @@ -291,6 +291,57 @@ NS_CHECK_EXEC([at_ns0], [ping -s 3200 -q -c 3 -i 0.3 -W 
> 2 10.1.1.2 | FORMAT_PING
>  OVS_TRAFFIC_VSWITCHD_STOP
>  AT_CLEANUP
>
> +AT_SETUP([datapath - bond active-backup set primary])
> +OVS_TRAFFIC_VSWITCHD_START([_ADD_BR([br1])])
> +
> +AT_CHECK([ovs-ofctl add-flow br0 "actions=normal"])
> +AT_CHECK([ovs-ofctl add-flow br1 "actions=normal"])
> +
> +ADD_NAMESPACES(at_ns0, at_ns1)
> +
> +ADD_VETH(p0, at_ns0, br0, "10.1.1.1/24")
> +ADD_VETH(p1, at_ns1, br1, "10.1.1.2/24")
> +on_exit 'ip link del link0a'
> +on_exit 'ip link del link0b'
> +AT_CHECK([ip link add link0a type veth peer name link1a])
> +AT_CHECK([ip link add link0b type veth peer name link1b])
> +
> +AT_CHECK([ip link set dev link0a up])
> +AT_CHECK([ip link set dev link1a up])
> +AT_CHECK([ip link set dev link0b up])
> +AT_CHECK([ip link set dev link1b up])
> +
> +AT_CHECK([ovs-vsctl add-bond br0 bond0 link0a link0b 
> bond_mode=active-backup])
> +AT_CHECK([ovs-vsctl add-bond br1 bond1 link1a link1b 
> bond_mode=active-backup])
> +
> +dnl Set primary bond member.
> +AT_CHECK([ovs-vsctl set port bond0 other_config:bond-primary=link0a -- \
> +                    set port bond1 other_config:bond-primary=link1a])
> +
> +OVS_WAIT_UNTIL([test -n "`ovs-appctl bond/show | grep 'active-backup 
> primary: link0a'`"])
> +
> +OVS_WAIT_UNTIL([ip netns exec at_ns0 ping -c 1 10.1.1.2])
> +
> +dnl Keep traffic active in the background.
> +NETNS_DAEMONIZE([at_ns0], [ping -q 10.1.1.2], [ping.pid])
> +
> +dnl Check correct port is used.
> +AT_CHECK([ovs-appctl dpctl/dump-flows -m | grep -Eq "actions:link[[01]]a"], 
> [0])
> +AT_CHECK([ovs-appctl dpctl/dump-flows -m | grep -Eq "actions:link[[01]]b"], 
> [1])
> +
> +dnl Change primary bond member.
> +AT_CHECK([ovs-vsctl set port bond0 other_config:bond-primary=link0b -- \
> +                    set port bond1 other_config:bond-primary=link1b])
> +
> +OVS_WAIT_UNTIL([test -n "`ovs-appctl bond/show | grep 'active-backup 
> primary: link0b'`"])
> +
> +dnl Check correct port is used.
> +AT_CHECK([ovs-appctl dpctl/dump-flows -m | grep -Eq "actions:link[[01]]a"], 
> [1])
> +AT_CHECK([ovs-appctl dpctl/dump-flows -m | grep -Eq "actions:link[[01]]b"], 
> [0])
> +
> +OVS_TRAFFIC_VSWITCHD_STOP
> +AT_CLEANUP
> +
>  AT_SETUP([datapath - ping over vxlan tunnel])
>  AT_SKIP_IF([test $HAVE_NC = no])
>  OVS_CHECK_VXLAN()
> --
> 2.43.5
>

_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to