Hi Xavier,

On 11/1/24 15:03, Mark Michelson wrote:
> Thanks for the fix Xavier.
> 

+1

> Acked-by: Mark Michelson <[email protected]>
> 
> On 10/31/24 13:10, Xavier Simonart wrote:
>> This reverts commit edc064b4c589ab1bb69352523481bd6d997aa1ca.
>>
>> In setups with multiple localnet ports w/o vlans (or multiple localnet
>> ports with the same vlans), that patch was trying to create the same
>> flows with action conjunction multiple times, which caused the following
>> assert:
>> 0  0x00007ffff77cd834 in __pthread_kill_implementation () from
>> /lib64/libc.so.6
>> 1  0x00007ffff777b8ee in raise () from /lib64/libc.so.6
>> 2  0x00007ffff77638ff in abort () from /lib64/libc.so.6
>> 3  0x000000000042f861 in flow_is_preferred (a=0xafe9a0, b=0xaf9380) at
>> controller/ofctrl.c:966
>> 4  0x000000000042f340 in link_installed_to_desired (i=0xb2eaf0,
>> d=0xafe9a0) at controller/ofctrl.c:987
>> 5  0x000000000042c17c in update_installed_flows_by_track
>> (flow_table=0x813a80, bc=0x7ffffffcc740, installed_flows=0x7894e0
>> <installed_pflows>, msgs=0x7ffffffcc790) at controller/ofctrl.c:2583
>> 6  0x000000000042af14 in ofctrl_put (lflow_table=0x810180,
>> pflow_table=0x813a80, pending_ct_zones=0x8129b0,
>> pending_lb_tuples=0x80e030, sbrec_meter_by_name=0x7e6840, req_cfg=0,
>> lflows_changed=true, pflows_changed=true) at controller/ofctrl.c:2826
>> 7  0x000000000045015c in main (argc=1, argv=0x7fffffffe218) at
>> controller/ovn-controller.c:5788
>>
>> Reverting that patch means that flows such as
>>    table_id=0, priority=180, vlan_tci=0x0000/0x1000,
>> actions=conjunction(100,2/2)
>> remains after the localnet port is deleted.
>>
>> Fixes: edc064b4c589 ("controller: Properly handle localnet flows in
>> I+P.")
>> Reported-at: https://issues.redhat.com/browse/FDP-926
>>
>> Signed-off-by: Xavier Simonart <[email protected]>
>> ---
>>   controller/physical.c |  9 ++--
>>   tests/ovn.at          | 98 +++++++++++++++++++------------------------
>>   2 files changed, 46 insertions(+), 61 deletions(-)
>>
>> diff --git a/controller/physical.c b/controller/physical.c
>> index 2aaa16cbd..c6db4f376 100644
>> --- a/controller/physical.c
>> +++ b/controller/physical.c
>> @@ -699,7 +699,7 @@ put_replace_chassis_mac_flows(const struct shash
>> *ct_zones,
>>           put_resubmit(OFTABLE_LOG_INGRESS_PIPELINE, ofpacts_p);
>>           ofctrl_add_flow(flow_table, OFTABLE_PHY_TO_LOG, 180,
>>                           rport_binding->header_.uuid.parts[0],
>> -                        &match, ofpacts_p,
>> &localnet_port->header_.uuid);
>> +                        &match, ofpacts_p, hc_uuid);
>>             /* Provide second search criteria, i.e localnet port's
>>            * vlan ID for conjunction flow */
>> @@ -719,7 +719,7 @@ put_replace_chassis_mac_flows(const struct shash
>> *ct_zones,
>>           conj->clause = 1;
>>           ofctrl_add_flow(flow_table, OFTABLE_PHY_TO_LOG, 180,
>>                           rport_binding->header_.uuid.parts[0],
>> -                        &match, ofpacts_p,
>> &localnet_port->header_.uuid);
>> +                        &match, ofpacts_p, hc_uuid);
>>       }
>>   }
>>   @@ -2393,9 +2393,8 @@ physical_handle_flows_for_lport(const struct
>> sbrec_port_binding *pb,
>>       struct local_datapath *ldp =
>>           get_local_datapath(p_ctx->local_datapaths,
>>                              pb->datapath->tunnel_key);
>> -    if (!strcmp(pb->type, "external") ||
>> -        !strcmp(pb->type, "patch") || !strcmp(pb->type, "l3gateway")) {
>> -        /* Those lports have a dependency on the localnet port.
>> +    if (!strcmp(pb->type, "external")) {
>> +        /* External lports have a dependency on the localnet port.
>>            * We need to remove the flows of the localnet port as well
>>            * and re-consider adding the flows for it.
>>            */
>> diff --git a/tests/ovn.at b/tests/ovn.at
>> index 10cd7a79b..dfb08fd1e 100644
>> --- a/tests/ovn.at
>> +++ b/tests/ovn.at
>> @@ -39495,62 +39495,6 @@ OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
>>   OVN_CLEANUP([hv1])
>>   AT_CLEANUP
>>   ])
>> -OVN_FOR_EACH_NORTHD([
>> -AT_SETUP([localnet port flows after deletion])
>> -ovn_start
>> -net_add n1
>> -
>> -check ovn-nbctl ls-add sw0
>> -
>> -for i in 1 2; do
>> -    check ovn-nbctl lsp-add sw0 sw0-p${i} -- lsp-set-addresses
>> sw0-p${i} "00:00:10:01:02:0${i} 10.0.0.${i}"
>> -    sim_add hv${i}
>> -    as hv${i}
>> -    ovs-vsctl add-br br-phys
>> -    ovn_attach n1 br-phys 192.168.0.${i}
>> -    ovs-vsctl set open .
>> external_ids:ovn-bridge-mappings=physnet1:br-phys
>> -    ovs-vsctl add-port br-int vif${i} -- \
>> -        set Interface vif${i} external-ids:iface-id=sw0-p${i} \
>> -                              options:tx_pcap=hv${i}/vif${i}-tx.pcap \
>> -                              options:rxq_pcap=hv${i}/vif${i}-rx.pcap
>> -done
>> -
>> -check ovn-nbctl lr-add lr0
>> -check ovn-nbctl lrp-add lr0 lr0-sw0 00:00:00:00:ff:01 10.0.0.254/24
>> -check ovn-nbctl lsp-add sw0 sw0-lr0
>> -check ovn-nbctl lsp-set-type sw0-lr0 router
>> -check ovn-nbctl lsp-set-addresses sw0-lr0 router
>> -check ovn-nbctl lsp-set-options sw0-lr0 router-port=lr0-sw0
>> -
>> -check ovn-nbctl --wait=hv sync
>> -wait_for_ports_up
>> -
>> -# We should not have any flows in table OFTABLE_PHY_TO_LOG from
>> in_port different from vif1 and ovn-hv2-0
>> -OVN_WAIT_REMOTE_INPUT_FLOWS(["hv1"],["hv2"])
>> -of1=$(as hv1 ovs-vsctl --bare --columns ofport find Interface name=vif1)
>> -of2=$(as hv1 ovs-vsctl --bare --columns ofport find Interface
>> name=ovn-hv2-0)
>> -AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_PHY_TO_LOG
>> | grep -v NXST_FLOW | grep "in_port=" | grep -v "in_port=$of1" | grep
>> -v "in_port=$of2" | wc -l], [0], [dnl
>> -0
>> -])
>> -
>> -# Add localnet port to sw0
>> -check ovn-nbctl lsp-add sw0 ln-sw0 -- lsp-set-addresses ln-sw0
>> unknown -- lsp-set-type ln-sw0 localnet
>> -check ovn-nbctl --wait=hv lsp-set-options ln-sw0
>> network_name=physnet1 -- set logical_switch_port ln-sw0 tag_request=100
>> -
>> -OVN_WAIT_PATCH_PORT_FLOWS(["ln-sw0"], ["hv1"])
>> -AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_PHY_TO_LOG
>> | grep -v NXST_FLOW | grep "in_port=" | grep -v "in_port=$of1" | grep
>> -v "in_port=$of2" | wc -l], [0], [dnl
>> -2
>> -])
>> -
>> -# Remove localnet port from sw0. Peer-ports flows should be deleted.
>> -check ovn-nbctl --wait=hv lsp-del ln-sw0
>> -AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_PHY_TO_LOG
>> | grep -v NXST_FLOW | grep "in_port=" | grep -v "in_port=$of1" | grep
>> -v "in_port=$of2" | wc -l], [0], [dnl
>> -0
>> -])
>> -
>> -OVN_CLEANUP([hv1],[hv2])
>> -AT_CLEANUP
>> -])
>>     AT_SETUP([Patch ports not owned by OVN])
>>   @@ -39665,3 +39609,45 @@ check_patch_ports
>>     OVN_CLEANUP([hv1])
>>   AT_CLEANUP
>> +
>> +OVN_FOR_EACH_NORTHD([
>> +AT_SETUP([Multiple localnet ports without vlans])
>> +AT_KEYWORDS([localnet])
>> +
>> +ovn_start
>> +
>> +net_add n1
>> +sim_add hv1
>> +ovs-vsctl add-br br-phys
>> +ovn_attach n1 br-phys 192.168.0.1
>> +ovn-appctl vlog/set dbg
>> +ovs-vsctl set Open_vSwitch .
>> external-ids:ovn-bridge-mappings=phys:br-phys
>> +
>> +check ovn-nbctl lr-add lr1
>> +check ovn-nbctl lrp-add lr1 lr1-ls1 00:00:01:ff:02:03 192.168.1.254/24
>> +
>> +check ovn-nbctl ls-add ls1
>> +check ovn-nbctl lsp-add ls1 ls1-lr1
>> +check ovn-nbctl lsp-set-type ls1-lr1 router
>> +check ovn-nbctl lsp-set-options ls1-lr1 router-port=lr1-ls1
>> +check ovn-nbctl lsp-set-addresses ls1-lr1 router
>> +
>> +check ovn-nbctl ls-add pub
>> +check ovn-nbctl lsp-add pub pub-lr1
>> +check ovn-nbctl lsp-set-type pub-lr1 router
>> +check ovn-nbctl lsp-set-options pub-lr1 router-port=lr1-pub
>> +check ovn-nbctl lsp-set-addresses pub-lr1 router
>> +
>> +check ovn-nbctl lrp-add lr1 lr1-pub 00:00:01:ff:01:03 172.16.1.254/24
>> +check ovn-nbctl lrp-set-gateway-chassis lr1-pub hv1
>> +
>> +check ovn-nbctl --wait=hv sync
>> +wait_for_ports_up
>> +
>> +check check ovn-nbctl -- lsp-add pub pub-ln -- lsp-set-type pub-ln

Nit: check check

>> localnet -- lsp-set-addresses pub-ln unknown -- lsp-set-options pub-ln
>> network_name=phys
>> +check check ovn-nbctl -- lsp-add ls1 ls1-ln -- lsp-set-type ls1-ln

Nit: check check

>> localnet -- lsp-set-addresses ls1-ln unknown -- lsp-set-options ls1-ln
>> network_name=phys
>> +

There's a potential for a race here.  We don't actually wait for
ovn-controller to get the SB updates that correspond to this NB change.

In general the test seems odd (out of context) because it's not obvious
that it's testing the ovn-controller flow processing part.  Should we at
least check that some of the relevant OpenFlow rules are installed here?

Thanks,
Dumitru

>> +OVN_CLEANUP([hv1])
>> +
>> +AT_CLEANUP
>> +])
> 
> _______________________________________________
> dev mailing list
> [email protected]
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
> 

_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to