Previously vrf names where generated using "ovnvrf" + datapath id. Now the controller supports the dynamic-routing-vrf-name setting to freely configure the vrf name. Note that the vrf ID is still the datapath id.
Acked-by: Dumitru Ceara <[email protected]> Signed-off-by: Felix Huettner <[email protected]> --- v5->v6: * addressed review comments controller/route-exchange.c | 14 ++++++-------- controller/route.c | 16 ++++++++++++++++ controller/route.h | 2 ++ tests/system-ovn.at | 26 ++++++++++++++++++++------ 4 files changed, 44 insertions(+), 14 deletions(-) diff --git a/controller/route-exchange.c b/controller/route-exchange.c index 3c49c60c0..2e5a5cfa1 100644 --- a/controller/route-exchange.c +++ b/controller/route-exchange.c @@ -218,27 +218,25 @@ route_exchange_run(struct route_exchange_ctx_in *r_ctx_in, const struct advertise_datapath_entry *ad; HMAP_FOR_EACH (ad, node, r_ctx_in->announce_routes) { uint32_t table_id = ad->db->tunnel_key; - char vrf_name[IFNAMSIZ + 1]; - snprintf(vrf_name, sizeof vrf_name, "ovnvrf%"PRIi32, table_id); if (ad->maintain_vrf) { - if (!sset_contains(&old_maintained_vrfs, vrf_name)) { - int error = re_nl_create_vrf(vrf_name, table_id); + if (!sset_contains(&old_maintained_vrfs, ad->vrf_name)) { + int error = re_nl_create_vrf(ad->vrf_name, table_id); if (error && error != EEXIST) { VLOG_WARN_RL(&rl, "Unable to create VRF %s for datapath " "%"PRIi32": %s.", - vrf_name, table_id, + ad->vrf_name, table_id, ovs_strerror(error)); continue; } } - sset_add(&_maintained_vrfs, vrf_name); + sset_add(&_maintained_vrfs, ad->vrf_name); } else { /* A previous maintain-vrf flag was removed. We should therefore * also not delete it even if we created it previously. */ - sset_find_and_delete(&_maintained_vrfs, vrf_name); - sset_find_and_delete(&old_maintained_vrfs, vrf_name); + sset_find_and_delete(&_maintained_vrfs, ad->vrf_name); + sset_find_and_delete(&old_maintained_vrfs, ad->vrf_name); } maintained_route_table_add(table_id); diff --git a/controller/route.c b/controller/route.c index 57c09cd2b..c27934056 100644 --- a/controller/route.c +++ b/controller/route.c @@ -186,6 +186,22 @@ route_run(struct route_ctx_in *r_ctx_in, ad->maintain_vrf |= smap_get_bool( &repb->options, "dynamic-routing-maintain-vrf", false); + const char *vrf_name = smap_get(&repb->options, + "dynamic-routing-vrf-name"); + if (vrf_name && strlen(vrf_name) >= IFNAMSIZ) { + static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(5, 20); + VLOG_WARN_RL(&rl, "Ignoring vrf name %s, since it is too long." + "Maximum length is %d characters", vrf_name, + IFNAMSIZ); + vrf_name = NULL; + } + if (vrf_name) { + memcpy(ad->vrf_name, vrf_name, strlen(vrf_name) + 1); + } else { + snprintf(ad->vrf_name, sizeof ad->vrf_name, "ovnvrf%"PRIi64, + ad->db->tunnel_key); + } + const char *port_name = smap_get(&repb->options, "dynamic-routing-port-name"); char *ifname = ifname_from_port_name( diff --git a/controller/route.h b/controller/route.h index ac57ed22c..90db096af 100644 --- a/controller/route.h +++ b/controller/route.h @@ -20,6 +20,7 @@ #include <stdbool.h> #include <netinet/in.h> +#include <net/if.h> #include "openvswitch/hmap.h" #include "sset.h" #include "smap.h" @@ -57,6 +58,7 @@ struct advertise_datapath_entry { struct hmap_node node; const struct sbrec_datapath_binding *db; bool maintain_vrf; + char vrf_name[IFNAMSIZ + 1]; struct hmap routes; /* The name of the port bindings locally bound for this datapath and diff --git a/tests/system-ovn.at b/tests/system-ovn.at index 08f96b7ca..2e272ce88 100644 --- a/tests/system-ovn.at +++ b/tests/system-ovn.at @@ -15470,6 +15470,7 @@ OVN_FOR_EACH_NORTHD([ AT_SETUP([dynamic-routing - DGP]) VRF_RESERVE([1337]) +VRF_RESERVE([1338]) # This test uses dynamic routing on a simulated multi-tenant internet # connection. @@ -15734,10 +15735,25 @@ blackhole 198.51.100.0/24 proto 84 metric 1000 233.252.0.0/24 via 192.168.10.10 dev lo onlink 233.253.0.0/24 via 192.168.20.20 dev hv1-mll onlink]) +# Changing the vrf name will switch to the new one. +# The old vrf will be removed. +check ovn-nbctl --wait=hv set Logical_Router_Port internet-phys \ + options:dynamic-routing-maintain-vrf=true +check ovn-nbctl --wait=hv set Logical_Router internet options:dynamic-routing-vrf-name=ovnvrf1338 +AT_CHECK([ip vrf | grep -q ovnvrf1337], [1], []) +OVS_WAIT_UNTIL_EQUAL([ip route list vrf ovnvrf1338 | awk '{$1=$1};1'], [dnl +blackhole 192.0.2.1 proto 84 metric 1000 +blackhole 192.0.2.2 proto 84 metric 100 +blackhole 192.0.2.3 proto 84 metric 100 +blackhole 192.0.2.10 proto 84 metric 100 +blackhole 198.51.100.0/24 proto 84 metric 1000 +233.252.0.0/24 via 192.168.10.10 dev lo onlink +233.253.0.0/24 via 192.168.20.20 dev hv1-mll onlink]) + # Stoping with --restart will not touch the routes. check ovn-appctl -t ovn-controller exit --restart OVS_WAIT_UNTIL([test "$(ovn-appctl -t ovn-controller debug/status)" != "running"]) -OVS_WAIT_UNTIL_EQUAL([ip route list vrf ovnvrf1337 | awk '{$1=$1};1'], [dnl +OVS_WAIT_UNTIL_EQUAL([ip route list vrf ovnvrf1338 | awk '{$1=$1};1'], [dnl blackhole 192.0.2.1 proto 84 metric 1000 blackhole 192.0.2.2 proto 84 metric 100 blackhole 192.0.2.3 proto 84 metric 100 @@ -15746,14 +15762,12 @@ blackhole 198.51.100.0/24 proto 84 metric 1000 233.252.0.0/24 via 192.168.10.10 dev lo onlink 233.253.0.0/24 via 192.168.20.20 dev hv1-mll onlink]) -# Now we set maintain-vrf again and stop the ovn-controller. -# It will then remove the VRF. +# When we now stop the ovn-controller it will remove the VRF. start_daemon ovn-controller OVS_WAIT_UNTIL([test "$(ovn-appctl -t ovn-controller debug/status)" == "running"]) -check ovn-nbctl --wait=hv set Logical_Router_Port internet-phys \ - options:dynamic-routing-maintain-vrf=true +check ovn-nbctl --wait=hv sync OVS_APP_EXIT_AND_WAIT([ovn-controller]) -AT_CHECK([ip vrf | grep -q ovnvrf1337], [1], []) +AT_CHECK([ip vrf | grep -q ovnvrf1338], [1], []) as ovn-sb OVS_APP_EXIT_AND_WAIT([ovsdb-server]) -- 2.47.1 _______________________________________________ dev mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-dev
