Hi Ales, Dumitru Besides the few small nits I just sent, and provided that "ovn v3 04/14 controller: Add I-P to monitor host interfaces and synchronize neighbors." is fixed in a similar way as the route-exchange fix <http://patchwork.ozlabs.org/project/ovn/patch/[email protected]/>, all patches can be Acked-by: Xavier Simonart <[email protected]>
Thanks for your hard work. Xavier On Tue, Aug 12, 2025 at 4:57 PM Ales Musil via dev <[email protected]> wrote: > The series adds support for basic EVPN L2. This is done by allowing > users to specify VNI on logical switches. That switch is considered > to be connected into the EVPN network. There are some prerequisites > that we expect to be configured. The should provide three interfaces > in the frr VRF, loopback called lo-$vni, vxlan interface called > vxlan-$vni and bridge that will control both of those interfaces, > called br-$vni. Those three interfaces are necessary to learn and > advertise the remote VTEPs and their FDBs. On top of that user is > expected to create OvS tunnel interface that will be used by OVN to > send/receive the traffic from EVPN. > > The series has four key parts, first is the netlink interaction > that allows us to learn the neighbors and create a new ones when > needed. Second part takes care of learning the remote VTEPs with > the physical flow creation that will ensure that the traffic is > properly handled in OVN. The third part takes care of learning the > remote FDBs that are provided by frr through the vxlan-$vni > interface, creating physical flows accordingly to learned FDBs. > The last part takes care of exposing OVN LSPs MAC addresses for > interfaces connected to the LS with VNI. > > All of those structures and their processing is happening strictly > on each ovn-controller. In other words there is no persistence, > all of this is in memory. This shouldn't affect restarts as we are > able to construct the data within single engine run so we wouldn't > flush the flows. The reason for that is mainly scalability. Storing > all those data in SB would lead to duplicates that would be different > only in the assigned chassis. If there is a need for better > persistence we can consider a local database. > > Please note that all of those config options are marked as > experimental, there is a chance that it might be changed or slightly > adjusted. The expectation is the feature would be tested within the > 25.09 release and possibly marked as stable in the 26.03 release. > > There are some things that should be considered for 26.03 that would > extend the functionality. For example the current approach allows us > to learn only static FDBs. But it would be definitely useful to allow > also dynamic FDB learning from incoming ARP as we do normally in OVN > pipeline. > > Ales Musil (8): > controller: Add support for remote VTEP learning. > controller: Create EVPN tunnel based on new option. > controller: Pair remote VTEPs with datapaths. > controller: Create physical flows based on EVPN structures. > northd: Add an option to specify EVPN vni in logical switches. > controller: Create physical flows based on the advertised EVPN FDBs. > controller, northd: Add logical flows to use the EVPN static FDBs. > controller, northd: Add an option to advertise FDB over EVPN. > > Dumitru Ceara (6): > controller: Support monitoring/updating neighbor entries through > Netlink. > controller: Watch for (Linux) neighbor changes. > controller: Add host-if-monitor to track (Linux) interface indices. > controller: Add I-P to monitor host interfaces and synchronize > neighbors. > multinode.at: Factor configuration of BGP FRR speakers and OVN > topology. > multinode.at: Add EVPN L2 test. > > Makefile.am | 5 +- > NEWS | 13 + > TODO.rst | 10 + > controller/automake.mk | 19 +- > controller/chassis.c | 37 ++ > controller/encaps.c | 115 +++- > controller/evpn-binding.c | 416 +++++++++++++ > controller/evpn-binding.h | 88 +++ > controller/evpn-fdb.c | 151 +++++ > controller/evpn-fdb.h | 59 ++ > controller/host-if-monitor-stub.c | 43 ++ > controller/host-if-monitor.c | 161 +++++ > controller/host-if-monitor.h | 30 + > controller/lflow.c | 1 + > controller/lflow.h | 8 +- > controller/neighbor-exchange-netlink.c | 487 ++++++++++++++++ > controller/neighbor-exchange-netlink.h | 62 ++ > controller/neighbor-exchange-stub.c | 47 ++ > controller/neighbor-exchange.c | 249 ++++++++ > controller/neighbor-exchange.h | 69 +++ > controller/neighbor-table-notify-stub.c | 57 ++ > controller/neighbor-table-notify.c | 244 ++++++++ > controller/neighbor-table-notify.h | 45 ++ > controller/neighbor.c | 275 +++++++++ > controller/neighbor.h | 98 ++++ > controller/ovn-controller.8.xml | 28 + > controller/ovn-controller.c | 745 +++++++++++++++++++++++- > controller/physical.c | 339 ++++++++++- > controller/physical.h | 12 + > controller/test-ovn-netlink.c | 197 +++++++ > include/ovn/actions.h | 3 + > include/ovn/logical-fields.h | 3 + > lib/actions.c | 53 +- > lib/logical-fields.c | 5 + > lib/ovn-util.c | 24 +- > lib/ovn-util.h | 6 + > northd/northd.c | 98 +++- > northd/northd.h | 6 +- > ovn-nb.xml | 61 ++ > tests/automake.mk | 16 +- > tests/multinode-bgp-macros.at | 370 ++++++++++++ > tests/multinode-testsuite.at | 1 + > tests/multinode.at | 317 +++++----- > tests/ovn-controller.at | 57 ++ > tests/ovn-macros.at | 10 +- > tests/ovn-northd.at | 59 ++ > tests/ovn.at | 21 +- > tests/system-common-macros.at | 16 + > tests/system-dpdk-testsuite.at | 1 + > tests/system-kmod-testsuite.at | 1 + > tests/system-ovn-netlink.at | 257 ++++++++ > tests/system-ovn.at | 233 ++++++++ > tests/system-userspace-testsuite.at | 1 + > tests/test-ovn.c | 1 + > tests/test-utils.c | 36 ++ > tests/test-utils.h | 10 +- > utilities/ovn-trace.c | 6 + > 57 files changed, 5534 insertions(+), 248 deletions(-) > create mode 100644 controller/evpn-binding.c > create mode 100644 controller/evpn-binding.h > create mode 100644 controller/evpn-fdb.c > create mode 100644 controller/evpn-fdb.h > create mode 100644 controller/host-if-monitor-stub.c > create mode 100644 controller/host-if-monitor.c > create mode 100644 controller/host-if-monitor.h > create mode 100644 controller/neighbor-exchange-netlink.c > create mode 100644 controller/neighbor-exchange-netlink.h > create mode 100644 controller/neighbor-exchange-stub.c > create mode 100644 controller/neighbor-exchange.c > create mode 100644 controller/neighbor-exchange.h > create mode 100644 controller/neighbor-table-notify-stub.c > create mode 100644 controller/neighbor-table-notify.c > create mode 100644 controller/neighbor-table-notify.h > create mode 100644 controller/neighbor.c > create mode 100644 controller/neighbor.h > create mode 100644 controller/test-ovn-netlink.c > create mode 100644 tests/multinode-bgp-macros.at > create mode 100644 tests/system-ovn-netlink.at > > -- > 2.50.1 > > _______________________________________________ > dev mailing list > [email protected] > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > _______________________________________________ dev mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-dev
