Sorry. I think that my question was wrong. What I meant for "local-port"
was,

- if we create "br0" as ovs bridge, ovs will create br0 (internal port) in
br0 bridge.
- We can assign IP address on br0 (port) interface to use it as "regular
bridge".
- What I want was, assign VLAN on that port - br0 which is "internal" or
"local" port of "br0" bridge.

Best regards,

- yongseok

On Wed, Feb 1, 2017 at 6:33 PM, <[email protected]> wrote:

> Hi Joo,
>
>
>
>    1. To assign an eth1 port inside a bridge to a vlan 40 use “ovs-vsctl
>    set port eth1 tag=40 vlan_mode=native-untagged”
>    This way you can avoid the use of fake bridges for this purpose, this
>    command is equivalent to “switchport access vlan 40” in the fabric world.
>    2. The packets that are sent out using br0 interface will be untagged,
>    the device connected to the other side of p3 will receive it in it’s native
>    vlan, so if you have other hosts running in this native vlan then yes you
>    can communicate.
>    3. Yes, you can see all the packets in the bridge but use the -e
>    option to also see the VLAN Tag in layer 2 frame “tcpdump -i br0 -e”
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
> *From: *Joo Yong-Seok <[email protected]>
> *Sent: *Wednesday, February 1, 2017 9:30 PM
> *To: *[email protected]
> *Subject: *[ovs-discuss] Regarding on VLAN
>
>
>
> Hi,
>
>
>
> Quick questions in regard of VLANs
>
>
>
> 1) Are we able to assign VLAN to local-port? (not sure whether it is
> really required...) If so, how? (without using "fake-bridge").
>
>
>
> 2) If not, I have following situation.
>
>
>
>  - br0(ovs-bridge) has p1, p2, p3 and p4 as a bridge port.
>
>    > p1 - tag 10
>
>    > p2 - tag 20
>
>    > p3 - trunk port
>
>    > local-port (br0).
>
>
>
>  - with above config, am I able to communicate to other host by using the
> IP address on br0?
>
>
>
> 3) If I run tcpudmp -i br0, am I able to see all the packets from every
> port?
>
>
>
> Thanks in advance.
>
>
>
> Best regards,
>
>
>
> - yongseok
>
>
>
>
>
_______________________________________________
discuss mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss

Reply via email to