Hi
I’m a network admin starting to learn Open vSwitch. I don’t manage to make it
functionning.
I’m using Debian 9 with three physical interfaces:
. enp0s3: management interfaces
. enp0s8: physical interface on vswitch0
. enp0s9: physical interface on vswitch1
vswitch0 (LOCALE) IP: 192.168.1.200
Theorically, as there is an IP on vswitch0, it shouldn’t matter wether it’s
enp0s8 or enp0s9 that is plugged into the 192.168.1.0/24 network.
Alas, it’s only when enp0s9 is used that the ping to the outter physical IP
succeed.
An both in default L2 and OpenFlow3 mode.
Here are the config and status files:
Debian9 config:
sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get install openvswitch-switch openvswitch-common
sudo ovs-vsctl add-br vswitch0
sudo ip link set vswitch0 up
sudo ip addr flush dev enp0s8
sudo ip addr flush dev enp0s9
sudo ovs-vsctl add-port vswitch0 enp0s8
sudo ovs-vsctl add-port vswitch0 enp0s9
sudo ip link set enp0s8 up
sudo ip link set enp0s9 up
sudo ip addr add 192.168.1.200/24 dev vswitch0
Normal default L2 Test:
ping -c 3 192.168.1.1 ---> Fails, unless I swap the interfaces used
Status:
sudo ovs-vsctl show
bf88303a-48cb-48b6-bd07-af1b8eaaca89
Bridge "vswitch0"
Port "enp0s9"
Interface "enp0s9"
Port "vswitch0"
Interface "vswitch0"
type: internal
Port "enp0s8"
Interface "enp0s8"
ovs_version: "2.6.2"
--
sudo ovs-ofctl show vswitch0
OFPT_FEATURES_REPLY (xid=0x2): dpid:0000080027c5c636
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src
mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
1(enp0s8): addr:08:00:27:f4:a5:b9
config: 0
state: 0
current: 1GB-FD COPPER AUTO_NEG
advertised: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
supported: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
speed: 1000 Mbps now, 1000 Mbps max
2(enp0s9): addr:08:00:27:c5:c6:36
config: 0
state: 0
current: 1GB-FD COPPER AUTO_NEG
advertised: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
supported: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
speed: 1000 Mbps now, 1000 Mbps max
LOCAL(vswitch0): addr:08:00:27:c5:c6:36
config: 0
state: 0
speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY (xid=0x4): frags=normal miss_send_len=0
--
sudo ovs-ofctl dump-flows vswitch0
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=686.922s, table=0, n_packets=224, n_bytes=28746,
idle_age=1, priority=0 actions=NORMAL
----
OpenFlow3 mode and tests:
sudo ovs-vsctl set bridge vswitch0 protocols=OpenFlow13
sudo ovs-ofctl -O Openflow13 dump-flows vswitch0
OFPST_FLOW reply (OF1.3) (xid=0x2):
cookie=0x0, duration=1334.814s, table=0, n_packets=398, n_bytes=66282,
priority=0 actions=NORMAL
ping 192.168.1.1 –> Fail ( functions if I swap the interfaces cables)
I just can’t figure out what is going wrong here, even after compairing the
status files ( ip link show, ip addr show).
thanks for any help
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
_______________________________________________
discuss mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
