Hi All, I want to set QoS with guide from below link “egress traffic shaping”, but do not know how for tunnel mode. http://docs.openvswitch.org/en/latest/faq/qos/
My scenario: I have several VM ports, and several VxLan ports in br0, and there is one seprate eth0 port (not in br0), which is the underlay port of Vxlan port. Currently I add rule to match VM traffic to certain Vxlan port, and all these vxlan ports would go out through eth0. Now I want to enable egress traffic shaping, eg: VM1 goes out with min_rate=10M, max_rate=100M. VM2 goes out with min_rate=50M, max_rate=200M. In the given example in http://docs.openvswitch.org/en/latest/faq/qos/ chapter “egress traffic shaping”, it directly uses the physical port. But in tunnel case, I can NOT specify the physical port directly. So how to configrue egress traffic shaping in tunnel case? Appreciate some example configruation. Thanks. Br, Wang Zhike
_______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss