On Sun, Mar 04, 2018 at 12:34:53PM -0500, Chris Boley wrote: > Hi, > I worked on this more and found that this worked. If anyone is actually > interested. > > sudo touch /etc/network/if-up.d/vbond0_tune > sudo nano /etc/network/if-up.d/vbond0_tune > > ##Pasted this in### > > ovs-vsctl set port vbond0 other_config:lacp-system-priority=50 > other_config:bond-rebalance-interval=5000 other_config: > bond-detect-mode=miimon other_config:bond-miimon-interval=100 > other_config:bond_updelay=200 other_config:bond_downdelay=200 > exit > > ##save file and exit## > > sudo chmod a+x /etc/network/if-up.d/vbond0_tune > > modify interfaces file to look this way: > allow-vbridge0 vbond0 > iface vbond0 inet manual > ovs_bridge vbridge0 > ovs_type OVSBond > ovs_bonds eth1 eth2 > ovs_options bond_mode=balance-slb lacp=active > post-up /etc/network/if-up.d/vbond0_tune > > After that I could run: > foo@VMHOST:~$ sudo ovs-vsctl list port vbond0 > > And I could see all the "other_options" > > The ovs-appctl bond/show vbond0 isn't really reflecting my up and down > delay. I'm not sure though if that's because the Cisco Switch ports are > taking priority or what's going on.
bond_updelay and bond_downdelay are columns rather than keys within other_config, so you should be able to just remove "other_config:" from those settings to make them work. _______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss