Thank you Aaron. Your suggestion did the trick. Now the testcase passes too.


*Vasu Dasari*


On Wed, Jun 19, 2019 at 11:10 AM Aaron Conole <[email protected]> wrote:

> Vasu Dasari <[email protected]> writes:
>
> > Hi,
> >
> > The following test case is not successful on a Ubuntu 18.04 based VM.
> >
> >  138: system-interface.at:30 interface - add route to br and verify
> clean-up
> >
> > OVS Code base used: master
> >
> > Command I used to run the test:
> > $ sudo make -C _build-gcc/ -s check-system-userspace TESTSUITEFLAGS='138'
> >
> > I am attaching the log file and entire
> system-userspace-testsuite.dir/138.
> >
> > On looking at the log file I see these errors:
> >
> > 2019-06-17T03:37:58.368Z|00001|dpif_netdev(revalidator6)|ERR|internal
> error parsing flow key skb_priority
> >
> (0),skb_mark(0),ct_state(0),ct_zone(0),ct_mark(0),ct_label(0),recirc_id(0),dp_hash(0),in_port(2),packet_type
> >
> (ns=0,id=0),eth(src=aa:55:00:00:00:01,dst=01:00:5e:00:00:16),eth_type(0x0800),ipv4
> > (src=10.0.0.1,dst=224.0.0.22,proto=2,tos=0xc0,ttl=1,frag=no)
> > +2019-06-17T03:37:58.368Z|00002|dpif(revalidator6)|WARN|netdev@ovs-netdev:
> failed to put[modify] (Invalid
> > argument) ufid:fd96553e-ce7f-47fe-a983-6e21b5a44d5f
> skb_priority(0/0),skb_mark(0/0),ct_state(0/0),ct_zone
> >
> (0/0),ct_mark(0/0),ct_label(0/0),recirc_id(0),dp_hash(0/0),in_port(2),packet_type(ns=0,id=0),eth
> >
> (src=aa:55:00:00:00:01/00:00:00:00:00:00,dst=01:00:5e:00:00:16/00:00:00:00:00:00),eth_type
> > (0x0800),ipv4(src=
> 10.0.0.1/0.0.0.0,dst=224.0.0.22/0.0.0.0,proto=2/0,tos=0xc0/0,ttl=1/0,frag=no
> ),
> > actions:userspace(pid=0,slow_path(match))
> >
> > Is there a problem with my environment or if this is a known issue.
>
> I think this is something in your environment sending multicast data
> over the TAP device when it comes up.  Can you check if the following
> 'makes it happy':
>
>   echo "0" > /proc/sys/net/ipv4/igmp_max_memberships
>   echo "0" > /proc/sys/net/ipv4/igmp_max_msf
>
> I think there are some unsolicited multicast messages flowing through
> the tun device on creation.  I'm not sure of the best way to fix up this
> test case at the moment.
>
> > Thanks
> > -Vasu
> >
> > Vasu Dasari
> >
> >
> >
> > _______________________________________________
> > discuss mailing list
> > [email protected]
> > https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
>
_______________________________________________
discuss mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss

Reply via email to