I’m not sure if this will help, but you can change the destination port for the vxlan tunnel: http://docs.openvswitch.org/en/latest/faq/vxlan/ <http://docs.openvswitch.org/en/latest/faq/vxlan/>
Alin. > On 2 Jul 2019, at 11:46, Miroslav Kubiczek > <[email protected]> wrote: > > Hi Folks, > > I'm struggling with the %subj%. The problem is that OVS is allocating the > same port on both sides (src and dst) for vxlan port. So if I'm running my > UDP server on port 4789 and then starting the bridge, the following > 'add-port' command will fail: > > #----- > # ovs-vsctl add-br br0 \ > -- set bridge br0 other-config:datapath-id=0000000000000001 \ > -- add-port br0 ens224 \ > -- add-port br0 ens256 \ > -- set-controller br0 tcp:127.0.0.1:6653 > # ovs-vsctl add-port br0 vtep -- set interface vtep type=vxlan > option:remote_ip=10.10.12.135 option:key=flow ofport_request=10 > > ovs-vsctl: Error detected while setting up 'vtep': could not add network > device vtep to ofproto (Address already in use). See ovs-vswitchd log for > details. > ovs-vsctl: The default log directory is "/var/log/openvswitch". > #----- > > Can someone recommend a solution or a workaround (docker/kvm or anything > simpler)? > > Thanks > > Miro > > > _______________________________________________ > discuss mailing list > [email protected] > https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
_______________________________________________ discuss mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
