I try to create a Ipsec tunnel between 2 hosts. The tunnel was create
and i can communicate between hosts. But, when i capture packets using
tcpdump, i see that the traffic is not encrypted.
My topology:
+--------------+ +--------------+
| vm0 | 10.250.204.11/24 | vm1 |
10.250.204.21/24
+--------------+ +--------------+
(vm_port0) (vm_port0)
| |
| |
| |
| |
10.250.204.10/24 10.250.204.20/24
+--------------+ +--------------+
| remibr0 | | remibr0 |
+--------------+ +---------------+
| eth1 |----------------------------------| eth1 |
+--------------+ +---------------+
10.16.0.138/16 10.16.0.247/16
The commands that i run:
ovs-vsctl add-br remibr0
ovs-vsctl add-port remibr0 vxlan0 -- set Interface vxlan0 type=vxlan
options:remote_ip=10.16.0.247 options:psk=test123
ovs-vsctl add-port remibr0 vi0 -- set Interface vi0 type=internal
ifconfig vi0 10.250.204.20/24 up
My ovs-vsctl show:
Bridge "remibr0"
Port "vxlan0"
Interface "vxlan0"
type: vxlan
options: {key="test123", remote_ip="10.16.0.247"}
Port "sw1-p1"
Interface "sw1-p1"
Port "remibr0"
Interface "remibr0"
type: internal
ovs_version: "2.10.1"
Someone knows if i messed up in some steep or i'm confused about concepts?
Thanks!
_______________________________________________
discuss mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
