Update: After upgrade firmware still same errors
# ethtool -i ext1 driver: ixgbe version: 5.1.0-k firmware-version: 0x800013d1, 20.0.16 expansion-rom-version: bus-info: 0000:af:00.1 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes On Mon, Oct 4, 2021 at 9:33 AM Satish Patel <[email protected]> wrote: > > Folks, > > I am new to this nic series and just found a strange issue, i am sure > people are using this nic in production with dpdk. > > # ovs-vsctl add-port br-vlan dpdk-1 -- set Interface dpdk-1 type=dpdk > options:dpdk-devargs=0000:3b:00.1 > ovs-vsctl: Error detected while setting up 'dpdk-1': Error attaching > device '0000:3b:00.1' to DPDK. See ovs-vswitchd log for details. > ovs-vsctl: The default log directory is "/var/log/openvswitch". > > > 2021-10-04T13:20:05.751Z|00272|dpdk|ERR|EAL: Driver cannot attach the > device (0000:3b:00.1) > 2021-10-04T13:20:05.751Z|00273|dpdk|ERR|EAL: Failed to attach device > on primary process > 2021-10-04T13:20:05.751Z|00274|netdev_dpdk|WARN|Error attaching device > '0000:3b:00.1' to DPDK > 2021-10-04T13:20:05.751Z|00275|netdev|WARN|dpdk-1: could not set > configuration (Invalid argument) > 2021-10-04T13:20:05.751Z|00276|dpdk|ERR|Invalid port_id=32 > > > # dpdk-devbind.py -s > > Network devices using DPDK-compatible driver > ============================================ > 0000:3b:00.0 'Ethernet Controller 10G X550T 1563' drv=vfio-pci unused=ixgbe > 0000:3b:00.1 'Ethernet Controller 10G X550T 1563' drv=vfio-pci unused=ixgbe > > Network devices using kernel driver > =================================== > 0000:04:00.0 'NetXtreme BCM5720 2-port Gigabit Ethernet PCIe 165f' > if=eno1 drv=tg3 unused=vfio-pci > 0000:04:00.1 'NetXtreme BCM5720 2-port Gigabit Ethernet PCIe 165f' > if=eno2 drv=tg3 unused=vfio-pci > 0000:af:00.0 'Ethernet Controller 10G X550T 1563' if=int1 drv=ixgbe > unused=vfio-pci > 0000:af:00.1 'Ethernet Controller 10G X550T 1563' if=ext1 drv=ixgbe > unused=vfio-pci > > > # ethtool -i ext0 > driver: ixgbe > version: 5.1.0-k > firmware-version: 0x80000f32, 19.5.12 > expansion-rom-version: > bus-info: 0000:3b:00.1 > supports-statistics: yes > supports-test: yes > supports-eeprom-access: yes > supports-register-dump: yes > supports-priv-flags: yes > > Do you think it is related firmware issue or driver version? _______________________________________________ discuss mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
