On 5/18/23 11:51, Виктор Андреевич Тураев via discuss wrote:
> Thanks a lot for your help! I took the ubuntu config and rebuilt the kernel 
> with it, check-kernel didn't give any errors but some tests were skipped, is 
> that normal? According to the unit tests that I ran with the recheck=yes 
> flag, two fell with an error, maybe I still missed some modules when building 
> the kernel? I also attached a .config file just in case.

You're missing some userspace tools like tftp.
Not sure why unit tests are failing though.

Best regards, Ilya Maximets.

>  
> 09.05.2023, 21:15, "Ilya Maximets" <[email protected]>:
> 
>     On 5/9/23 14:34, Виктор Андреевич Тураев via discuss wrote:
> 
>          Hello, I am writing a thesis on ovs , but I had problems, after I 
> completed all the steps necessary to install ovs in unit tests errors got 
> out, some I could fix myself, some not, I have ubuntu 22.04.2 latest which I 
> deployed in virtualbox, while I rebuilt the kernel with version 6.2.8 from 
> kernel.org, maybe I forgot to include something in the config when building?
> 
> 
>     Yes. You're missing at least a few NF_CONNTRACK config options:
>      
> 
>          2023-05-09T12:09:43.851Z|00023|ofproto_dpif|INFO|system@ovs-system 
> <mailto:system@ovs-system>: Datapath does not support ct_zone
>          2023-05-09T12:09:43.851Z|00024|ofproto_dpif|INFO|system@ovs-system 
> <mailto:system@ovs-system>: Datapath does not support ct_mark
>          2023-05-09T12:09:43.851Z|00025|ofproto_dpif|INFO|system@ovs-system 
> <mailto:system@ovs-system>: Datapath does not support ct_label
> 
> 
>     So, CONFIG_NF_CONNTRACK_ZONES, CONFIG_NF_CONNTRACK_MARK, etc.
> 
>     This is causing failures of most of the CT tests. You also don't
>     have NAT for FTP and TFTP built. That might cause problems for
>     some of the tests as well, but most of these may be skipped if you
>     don't have userspace ftp programs installed.
> 
>     And if you'll build things as modules, instead of being builtin, it
>     will be easier to make changes and test them. Also, some tests might
>     not be happy if you can't reload the openvswitch module between them.
>     It should not be a problem in theory, but it's hard to tell for sure.
> 
>     In general, if you copy the default config from your Ubuntu system
>     and use defaults for any new options, you shouldn't miss any important
>     config options. The build might take longer, but you may save on
>     kernel re-builds by using modules.
>      
> 
>          I'm sending the logs of the kernel tests, as they are the ones I 
> need to fix for work, but I also attach the logs of the unit tests. Please, 
> tell me what I could do wrong, or what could be wrong?
> 
> 
>     The unit test failures are strange. Try running with RECHECK=yes.
> 
>     Best regards, Ilya Maximets.
> 
> 
> _______________________________________________
> discuss mailing list
> [email protected]
> https://mail.openvswitch.org/mailman/listinfo/ovs-discuss

_______________________________________________
discuss mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss

Reply via email to