I am trying to send only correlated events that are Total Inbound 5+ to mlogc. When I set the SecDefaultAction for phase1 and phase2 to "pass,log" or to "nolog,auditlog" it seems to send all events, even ones that are under TX 5 to the mlogc.
When I set it to "pass,nolog" it seems to only send events that are Total Inbound 5+ to the mlogc. This is what I want, but "pass,nolog" is not one of the options listed in the section "Alert Logging Control" so I am just not sure if having it set to nolog is the correct method when sending correlated/anomaly events to mlogc. Regards, Wesley Render, IT Consultant, RHCSA Phone: 1.403.228.1221 ext 201 www.otherdata.com -----Original Message----- From: Ryan Barnett [mailto:rbarn...@trustwave.com] Sent: August-27-14 1:55 PM To: Wesley Render; owasp-modsecurity-core-rule-set@lists.owasp.org Subject: Re: [Owasp-modsecurity-core-rule-set] inbound_anomaly_score_level - Only send critical events Wesley, What exactly are you trying to achieve here? Ryan Barnett Senior Lead Security Researcher, SpiderLabs Trustwave | SMART SECURITY ON DEMAND www.trustwave.com <http://www.trustwave.com/> On 8/25/14 6:20 PM, "Wesley Render" <wren...@otherdata.com> wrote: >I was just wanting to follow up. Is anyone able to confirm the proper >logging settings when using ModSecurity, and sending the logs out via >mlogc to AuditConsole? Should we have our >modsecurity_crs_10_setup.conf SecDefaultAction lines set to the >following? > >SecDefaultAction "phase:1,pass,nolog" >SecDefaultAction "phase:2,pass,nolog" > >Thanks! > > >Wesley Render, IT Consultant, RHCSA >Phone: 1.403.228.1221 ext 201 >www.otherdata.com > > >-----Original Message----- >From: owasp-modsecurity-core-rule-set-boun...@lists.owasp.org >[mailto:owasp-modsecurity-core-rule-set-boun...@lists.owasp.org] On >Behalf Of Wesley Render >Sent: August-20-14 11:30 AM >To: 'OWASP Mod Security' >Subject: Re: [Owasp-modsecurity-core-rule-set] >inbound_anomaly_score_level - Only send critical events > >When I set it to the following, I get a lot less logs coming in. I am >confused on how it should be set as well when sending logs to >AuditConsole using mlogc. Here is a summary of relevant settings I have right now >(below). I guess it seems as though the logging settings are not able to >combine one correlated event into the audit log. They can only combine >one correlated event into the apache error_log? > > >############ modsecurity_crs_10_setup.conf Settings >########################## > ># Collaborative Detection Mode >SecDefaultAction "phase:1,pass,nolog" >SecDefaultAction "phase:2,pass,nolog" > > ># Collaborative Detection Blocking # >SecAction \ > "id:'900004', \ > phase:1, \ > t:none, \ > setvar:tx.anomaly_score_blocking=on, \ > nolog, \ > pass" > > >############ modsec2.user.conf Settings >###################################### >SecDataDir /usr/local/apache/conf/sec-data SecTmpDir >/usr/local/apache/conf/sec-tmp > >SecRuleEngine On >SecPcreMatchLimit 50000 >SecPcreMatchLimitRecursion 50000 > ># With SecRequestBodyAccess turned on care needs to be taken with false >positives SecRequestBodyAccess On SecRequestBodyLimit 134217728 >SecRequestBodyLimitAction ProcessPartial SecRequestBodyNoFilesLimit >131072 SecRequestBodyInMemoryLimit 131072 > >SecResponseBodyAccess On >SecResponseBodyMimeType (null) text/html text/plain text/xml >SecResponseBodyLimit 524228 SecResponseBodyLimitAction ProcessPartial >SecServerSignature Apache SecCookieFormat 0 > ># Additional ModSecurity Logging Options for mlogc # Use ReleventOnly >auditing SecAuditEngine RelevantOnly SecAuditLogRelevantStatus >"^(?:5|4(?!04))" > ># Must use concurrent logging >SecAuditLogType Concurrent > ># Send all audit log parts >SecAuditLogParts ABDEFHIJKZ > ># Use the same /CollectorRoot/LogStorageDir as in mlogc.conf >SecAuditLogStorageDir /var/log/mlogc/data > ># Pipe audit log to mlogc with your configuration SecAuditLog >"|/usr/local/modsecurity/bin/mlogc /etc/mlogc.conf" > ># OWASP Rules >Include conf/owasp-modsecurity-crs/modsecurity_crs_10_setup.conf >Include conf/owasp-modsecurity-crs/activated_rules/*.conf > ># Trustwave Commercial Rules >Include conf/slr_vuln_rules/owasp_crs_integration/attack_type/*.conf > > >Wesley Render, IT Consultant, RHCSA >Phone: 1.403.228.1221 ext 201 >www.otherdata.com > > >-----Original Message----- >From: owasp-modsecurity-core-rule-set-boun...@lists.owasp.org >[mailto:owasp-modsecurity-core-rule-set-boun...@lists.owasp.org] On >Behalf Of Earl Fogel >Sent: August-20-14 9:59 AM >To: OWASP Mod Security >Subject: Re: [Owasp-modsecurity-core-rule-set] >inbound_anomaly_score_level - Only send critical events > >I have this problem as well. I also have: > >SecDefaultAction "phase:1,pass,nolog,auditlog" >SecDefaultAction "phase:2,pass,nolog,auditlog" >SecAuditEngine RelevantOnly >SecAuditLogRelevantStatus "^(?:5|4(?!04))" > >Could that be relevent? How should these be set in collaborative >detection mode? > >Earl >- > > >On Wed, 20 Aug 2014, Josh Amishav-Zlatin <jam...@owasp.org> wrote: > >>On Wed, Aug 20, 2014 at 6:56 AM, Wesley Render <wren...@otherdata.com> >wrote: >> >> Would anyone know if it would be possible to adjust the core >>rule set >> configuration file so that only events that have a total inbound >score of >> 5 or higher are sent to the audit log. (Running in Collaborative >> Detection and Anomaly Scoring & Blocking) Version: >SecComponentSignature >> "OWASP_CRS/2.2.9" >> >> >>Hi Wesley, >> >>When the CRS is used in anomaly mode it should not create audit logs >>unless the event passes the threshold set in the 10 file. Can you send >>me privately an event from AuditConsole that does not have an anomaly >>score level above 5? I'm specifically interested in sections H and K. >> >>- Josh >> >> > > >_______________________________________________ >Owasp-modsecurity-core-rule-set mailing list >Owasp-modsecurity-core-rule-set@lists.owasp.org >https://lists.owasp.org/mailman/listinfo/owasp-modsecurity-core-rule-se >t > >_______________________________________________ >Owasp-modsecurity-core-rule-set mailing list >Owasp-modsecurity-core-rule-set@lists.owasp.org >https://lists.owasp.org/mailman/listinfo/owasp-modsecurity-core-rule-se >t ________________________________ This transmission may contain information that is privileged, confidential, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is strictly prohibited. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. _______________________________________________ Owasp-modsecurity-core-rule-set mailing list Owasp-modsecurity-core-rule-set@lists.owasp.org https://lists.owasp.org/mailman/listinfo/owasp-modsecurity-core-rule-set